Thanks for this. I have mapped my CRS to be the NAV1 using the encoder for to increment +/- 1, and the trim increment +/- 0.05. with that said the display seems limited to 3 values CRS followed by a big gap, then the value i.e. 110. Anyone know how I can show 110.05 namely the values after the decimal point?
@@Huddison I purchased a stream deck instead. Has transformed using the Garmin's and pop outs in MSFS that do not include the actual PFD or MFD buttons 👍
Just came across your video, Thanks so much for taking the time to help the community of simmers. I was pulling my hair out trying to figure out how to get my panels to work with the Airbus and now thanks to you I have the answer. Your videos are Golden, please keep up this valuable help to our community. Thank you Huddison...
Thanks for this video. I have all 3 Saitek panels, and now two Stream Decks as well. I also have the paid version of Axis and Ohs. I have found that A&O is very easy to do things like fine-tuning the flight controls. It has been a BEAR to try and understand how the Saitek panels work with it. Also, the Stream Decks are easy to do standard keyboard/joystick replacements, but a lot more problematical to figure out how to read Sim Connect events and tie them in with A&O (as I am a non-programmer). Your video above certainly makes SPAD Next look a heck of a lot easier to manipulate the panels. I have seen that the latest versions of SPAD Next recognize Stream Decks and X-Touch Minis.
Well, the a320 sure is a good reason to try Spad.Next finally. Thought it wasn't worth it reading about the issues, but I'm gonna go for it tomorrow I think. Gotta get some sleep now though. :3 Thanks for the demos Huddison!
@@Huddison For your light issue you may refer to th-cam.com/video/PtEQ3EWFjw0/w-d-xo.html In the middle of the video he shows how he configs the led's.
I'd like to use Spad.Next to control the LED push-buttons on my Virpil CM2 Throttle, Virpil Control Panel #1, and Virpil Control Panel #2. Could you fathom a guess if that would work? The LED pushbuttons are addressable using a special virpil tool called the VPC LED Link Tool or just "VPC Link Tool" I can address each device by it's unique identifier number and further each LED by a kind of a hex code using the VPC Link Tool. So hypothetically, i could use Spad.Next to issue a command (perhaps some sort of external command option in Spad.Next ?) and it would be like something you would type at a command line and it would execute. The issue is the LED pushbutton lights would have to be reset once you were done with the command or you would have lights on all over the place .... If you add up all three devices , there are a lot of RGB LEDs to choose from.
I have to be completely honest with you: I will not be the best person to ask this question to, as I have only lightly experimented with Spad.Next and its capabilities. I recommend that you ask these questions in the official forums: www.spadnext.com/forum/ My instincts are telling me that what you ask may be possible - I just feel that you're better of asking the real experts of the program.
I'm following your advice, good tutorial btw...in the MSFS2020 SR22, the 2x alternator switches are coded in SPAD.NEXT (multiswitch panel) as a single button (C172 profile, as there's no SR22 available), that's fine, I'd like to do the same for the 2x battery switches, but been struggling....the SPAD.NEXT configuration only switches ON battery no 2, battery 1 is a mouse click start....advice on configuring the single BATTERY switch to work both battery switches on the SR22 will be highly appreciated
Hi Stephen, I have very few hours configuring Spad.Next, so I'm not best placed to give you sound advice on this issue - but head over to the Spad.Next forums: www.spadnext.com/forum/ - lots of far more knowledgeable chaps there & I'm sure they will point you in the right direction :)
@@filipeparanhos My sensitivity settings are in this video (jump to the appropriate part):th-cam.com/video/WcJo1kCaYk0/w-d-xo.html I just set throttle, flaps and (when required) speed brakes to the corresponding levers - I have flaps and speed brakes axis reversed, so that they behave as they would in the real aircrafts.
@@filipeparanhos Here to help ;) Also, check this video for detailed instructions on how to set them up in the Sim: th-cam.com/video/bZMOMCbrcYo/w-d-xo.html
Thank you so much for this tutorial. I'm not very good at programming and I don't have much time on my hands. I will probably buy a Logitech Flight Multi Panel, I would like to know if there are already standard configuration files associated with Cesna 172 for example that can be loaded into the Spad Next program without having to program everything. Thank you for your time
I haven't used Spad.Next for quite some time now, but I do recall files that can be loaded to aid with certain configuration. You may not need to do so, if you buy the Multi Panel ;)
Got a logi flight switch panel and I refuse to buy special sw to use it on MSFS. Logitech should provide sw that interfaces with MSFS2020 internally, like most other peripheral suppliers. I’d like to remap the switches and I can’t without SPAD. 👎
Totally agree I paid $150 for the panel and I refuse to pay $30 for the spad sw, I buy a $70 Logitech mouse and I can customize it 1000 different ways, so why Logitech can’t write a simple script is beyond me
I was so frustrated to use spad, but now became a breeze thank you so much! However, i left simming 4 years ago on fsx and when i came back on msfs2020, my saitek (non logitech) multipanel appeared to be broken, the +- knob doesnt decrease, when i turn anti clock wise it keeps on increasing, when i run the test on logitech sfw i noticed that when i roll the trim wheel on the panel rapidly the the knob would go (-) decreases. I cleaned the circuit board but did not fix the issue. Now i want to use spad to make the trim wheel function as the knob (+) for rolling pitch wheel up and (-) for rolling pitch down but i want it for all functions (hdg, vspeed, alt etc...) any idea how to configure that pn spad?
THANKS FOUR YOUR VIDEOS AND TUTORIALS!!! YOU ARE THE BEST!! BUT I HAVE A PROBLEM, Y ES QUE CUANDO ENTRO A SPAD.NEXT ME DICE LO SIGUIENTE "WINDOWS USB ENCHANTED POWER MANAGEMENT IS ENABLE FOR THE RADIO PANEL AND WILL MOST LIKELY CAUSE PROBLEMS. TO FIX THIS AUTOMATICALY FOR YOU, PLEAS TO START SPAD.NEXT ONE TIME AS ADMINISTRATOR". WHAT HAPPENS IS THAT I DON'T KNOW HOW TO PUT SPAD.NEXT AS ADINISTRATOR. CAN YOU HELP ME??
Would this software work to get the autopilot panel working better with some of the study level planes? for example I tried it with the headwind a330 it seemed to work in the virtual cockpit but was frozen digits on my panel altitude as i recall it wouldnt work too well seemed i needed nore programming options. it won't hold the heading for example. Just wondering why the multipanel works with some msfs aircraft and not with others...
I think that I was referring to the MSFS extra driver/plugin on the official Logitech driver page - part way through this video explains where: th-cam.com/video/4UqOvMFdhXQ/w-d-xo.html
I have a problem with my Logitech Throttle Quadrant within Microsoft Flight Simulator 2020. I thought the throttle quadrant was faulty, so I bought a new one, but that one is just the same. The throttle (Axis X) will graduate from 0% to 50% and then jump to 100%, the Prop Pitch (Axis Y) is the same, the mixture (Axis z) is ether 0% or 50%, nothing in-between or after 50% I also have the Flight Yoke and Rudder Peddles and they work perfectly. Is this a hardware or software problem, do I need to change the drivers? Any help will be much appreciated. P.S. The throttle quadrant is the USB version.
I've not encountered this particular problem myself, but came across this forum post which may help (scroll to the solutions nearer the bottom) :forums.flightsimulator.com/t/logitech-throttle-quadrant-issues-solved/156098
@@Huddison Thanks Huddison for your help. I have printed out the suggestions from the forum you suggested and I'll give it a try. It may be a bit complex for me to do. I don't like the thought of deleting registry keys!!! Thanks again. Dave.
@@morgidvmw0mdv Have you reached out to logitech? I had a problem with my multi panel a couple of weeks ago and their support was superb. Got it all working and I’m a happy camper. They even got so far as to suggest a warranty swap, but that wasn’t necessary in the end
Can anybody help me, the trim pitch is incredibly slow and insensitive when flying C172 standard steam gauges in MSFS2020. Is there any way to adjust the trim response because using it is painfully slow and useless.
@@Huddison - I sure have and no luck. I have posted the issue in their online forum just a few minutes ago, it will be interesting to see if anybody can solve that 'Warnings' re "LogiMicrosoftFlightSimulator" running. If you search for "LogiMicrosoftFlightSimulator" in your Registry, does an entry show up as mine does?
![โฮ่ง! (SUGOI) - LYKN [ OFFICIAL MV ]](http://i.ytimg.com/vi/nFp4zjAARFs/mqdefault.jpg)
Thanks for this. I have mapped my CRS to be the NAV1 using the encoder for to increment +/- 1, and the trim increment +/- 0.05. with that said the display seems limited to 3 values CRS followed by a big gap, then the value i.e. 110. Anyone know how I can show 110.05 namely the values after the decimal point?
Pinned so someone may hopefully come to your rescue!
@@Huddison I purchased a stream deck instead. Has transformed using the Garmin's and pop outs in MSFS that do not include the actual PFD or MFD buttons 👍
@@leegilbert7551 That sounds great.
Just came across your video, Thanks so much for taking the time to help the community of simmers. I was pulling my hair out trying to figure out how to get my panels to work with the Airbus and now thanks to you I have the answer. Your videos are Golden, please keep up this valuable help to our community. Thank you Huddison...
Wow thanks Dave, that means a great deal to me :)
Thanks for this video. I have all 3 Saitek panels, and now two Stream Decks as well. I also have the paid version of Axis and Ohs. I have found that A&O is very easy to do things like fine-tuning the flight controls. It has been a BEAR to try and understand how the Saitek panels work with it. Also, the Stream Decks are easy to do standard keyboard/joystick replacements, but a lot more problematical to figure out how to read Sim Connect events and tie them in with A&O (as I am a non-programmer). Your video above certainly makes SPAD Next look a heck of a lot easier to manipulate the panels. I have seen that the latest versions of SPAD Next recognize Stream Decks and X-Touch Minis.
With a little research & trial and error you can achieve a lot with Spad.Next
Well, the a320 sure is a good reason to try Spad.Next finally. Thought it wasn't worth it reading about the issues, but I'm gonna go for it tomorrow I think. Gotta get some sleep now though. :3 Thanks for the demos Huddison!
No problem!
Nice overview.
Do you have the Logitech driver and MSFS plug-in installed as well, or just Spad on its own?
I have the Logitech driver & the MSFS plug in, for the multi panel installed also.
@@Huddison Thanks for the info. I've a couple of panels on the way and this vids been really helpful in preperation.
@@DigiDonkey With spad.next I don't think you need the plugin as it may interfere with the inputs from spad.next.
@@Huddison For your light issue you may refer to th-cam.com/video/PtEQ3EWFjw0/w-d-xo.html
In the middle of the video he shows how he configs the led's.
@@A-Nown Very useful, thanks.
I'd like to use Spad.Next to control the LED push-buttons on my Virpil CM2 Throttle, Virpil Control Panel #1, and Virpil Control Panel #2. Could you fathom a guess if that would work? The LED pushbuttons are addressable using a special virpil tool called the VPC LED Link Tool or just "VPC Link Tool" I can address each device by it's unique identifier number and further each LED by a kind of a hex code using the VPC Link Tool. So hypothetically, i could use Spad.Next to issue a command (perhaps some sort of external command option in Spad.Next ?) and it would be like something you would type at a command line and it would execute. The issue is the LED pushbutton lights would have to be reset once you were done with the command or you would have lights on all over the place .... If you add up all three devices , there are a lot of RGB LEDs to choose from.
I have to be completely honest with you: I will not be the best person to ask this question to, as I have only lightly experimented with Spad.Next and its capabilities.
I recommend that you ask these questions in the official forums: www.spadnext.com/forum/
My instincts are telling me that what you ask may be possible - I just feel that you're better of asking the real experts of the program.
Great video! Is this the complete version of Spad?
That was just the trial version.
Got it thanks!!
I'm following your advice, good tutorial btw...in the MSFS2020 SR22, the 2x alternator switches are coded in SPAD.NEXT (multiswitch panel) as a single button (C172 profile, as there's no SR22 available), that's fine, I'd like to do the same for the 2x battery switches, but been struggling....the SPAD.NEXT configuration only switches ON battery no 2, battery 1 is a mouse click start....advice on configuring the single BATTERY switch to work both battery switches on the SR22 will be highly appreciated
Hi Stephen, I have very few hours configuring Spad.Next, so I'm not best placed to give you sound advice on this issue - but head over to the Spad.Next forums: www.spadnext.com/forum/ - lots of far more knowledgeable chaps there & I'm sure they will point you in the right direction :)
Thanks for the video. Could you please show us how did you set the Boeing levers? I have them, but never used before..
How they are set up in the sim you mean?
@@Huddison Exactly. I'd like to know which assignements, sensitvity and this kind of thing, if you don't mind. Cheers!
@@filipeparanhos My sensitivity settings are in this video (jump to the appropriate part):th-cam.com/video/WcJo1kCaYk0/w-d-xo.html
I just set throttle, flaps and (when required) speed brakes to the corresponding levers - I have flaps and speed brakes axis reversed, so that they behave as they would in the real aircrafts.
@@Huddison Brilliant! Thank you for your help!!! All the best!
@@filipeparanhos Here to help ;) Also, check this video for detailed instructions on how to set them up in the Sim: th-cam.com/video/bZMOMCbrcYo/w-d-xo.html
Thank you so much for this tutorial. I'm not very good at programming and I don't have much time on my hands. I will probably buy a Logitech Flight Multi Panel, I would like to know if there are already standard configuration files associated with Cesna 172 for example that can be loaded into the Spad Next program without having to program everything.
Thank you for your time
I haven't used Spad.Next for quite some time now, but I do recall files that can be loaded to aid with certain configuration.
You may not need to do so, if you buy the Multi Panel ;)
Got a logi flight switch panel and I refuse to buy special sw to use it on MSFS. Logitech should provide sw that interfaces with MSFS2020 internally, like most other peripheral suppliers. I’d like to remap the switches and I can’t without SPAD. 👎
That's a good & fair point; I also think we should be able to remap the panels within MSFS itself.
Totally agree I paid $150 for the panel and I refuse to pay $30 for the spad sw, I buy a $70 Logitech mouse and I can customize it 1000 different ways, so why Logitech can’t write a simple script is beyond me
I was so frustrated to use spad, but now became a breeze thank you so much!
However, i left simming 4 years ago on fsx and when i came back on msfs2020, my saitek (non logitech) multipanel appeared to be broken, the +- knob doesnt decrease, when i turn anti clock wise it keeps on increasing, when i run the test on logitech sfw i noticed that when i roll the trim wheel on the panel rapidly the the knob would go (-) decreases. I cleaned the circuit board but did not fix the issue.
Now i want to use spad to make the trim wheel function as the knob (+) for rolling pitch wheel up and (-) for rolling pitch down but i want it for all functions (hdg, vspeed, alt etc...) any idea how to configure that pn spad?
I'm way out of practice with Spad, but our Discord may be able to help: discord.gg/Ameu93sHfY
THANKS FOUR YOUR VIDEOS AND TUTORIALS!!! YOU ARE THE BEST!! BUT I HAVE A PROBLEM, Y ES QUE CUANDO ENTRO A SPAD.NEXT ME DICE LO SIGUIENTE "WINDOWS USB ENCHANTED POWER MANAGEMENT IS ENABLE FOR THE RADIO PANEL AND WILL MOST LIKELY CAUSE PROBLEMS. TO FIX THIS AUTOMATICALY FOR YOU, PLEAS TO START SPAD.NEXT ONE TIME AS ADMINISTRATOR". WHAT HAPPENS IS THAT I DON'T KNOW HOW TO PUT SPAD.NEXT AS ADINISTRATOR. CAN YOU HELP ME??
Hola Gamyr, cuando quieres abrir SPADNEXT, se haga 'clic' DERECHO' y escoge 'run as administrator'.
Would this software work to get the autopilot panel working better with some of the study level planes? for example I tried it with the headwind a330 it seemed to work in the virtual cockpit but was frozen digits on my panel altitude as i recall it wouldnt work too well seemed i needed nore programming options. it won't hold the heading for example. Just wondering why the multipanel works with some msfs aircraft and not with others...
Difficult to say, worth giving it a trial run.
I am aware of the Logitech plugin but what is the MSFS plugin you refer to please?
I think that I was referring to the MSFS extra driver/plugin on the official Logitech driver page - part way through this video explains where: th-cam.com/video/4UqOvMFdhXQ/w-d-xo.html
Hi how much is the Spadex after free trial .
24.99 Euros for the basic version - check the link in the description.
I have a problem with my Logitech Throttle Quadrant within Microsoft Flight Simulator 2020. I thought the throttle quadrant was faulty, so I bought a new one, but that one is just the same. The throttle (Axis X) will graduate from 0% to 50% and then jump to 100%, the Prop Pitch (Axis Y) is the same, the mixture (Axis z) is ether 0% or 50%, nothing in-between or after 50% I also have the Flight Yoke and Rudder Peddles and they work perfectly. Is this a hardware or software problem, do I need to change the drivers? Any help will be much appreciated.
P.S. The throttle quadrant is the USB version.
I've not encountered this particular problem myself, but came across this forum post which may help (scroll to the solutions nearer the bottom) :forums.flightsimulator.com/t/logitech-throttle-quadrant-issues-solved/156098
@@Huddison Thanks Huddison for your help. I have printed out the suggestions from the forum you suggested and I'll give it a try. It may be a bit complex for me to do. I don't like the thought of deleting registry keys!!!
Thanks again. Dave.
@@morgidvmw0mdv Have you reached out to logitech? I had a problem with my multi panel a couple of weeks ago and their support was superb.
Got it all working and I’m a happy camper. They even got so far as to suggest a warranty swap, but that wasn’t necessary in the end
should the logitech drivers be uninstalled befor the spad.next
I didn't uninstall my Logitech drivers.
Can anybody help me, the trim pitch is incredibly slow and insensitive when flying C172 standard steam gauges in MSFS2020. Is there any way to adjust the trim response because using it is painfully slow and useless.
Have you tried looking at the 'Snipets' for the trim wheel in Spad Next? There may be 1 or 2 that will increase the wheel's sensitivity.
@@Huddison - I sure have and no luck. I have posted the issue in their online forum just a few minutes ago, it will be interesting to see if anybody can solve that 'Warnings' re "LogiMicrosoftFlightSimulator" running.
If you search for "LogiMicrosoftFlightSimulator" in your Registry, does an entry show up as mine does?
@@D800Lover Let's hope somebody replies to your forum post.
I don't get anything showing in my registry under that search term.