Autel Scanner: ABS modulator bleed / How to Get air out of ABS / Anti-lock brake system bleeding
ฝัง
- เผยแพร่เมื่อ 26 ก.ค. 2024
- Using an Autel scanner, I show ABS modulator bleed or how to get air out of ABS or anti-lock brake system bleeding. I use the Autel MP808TS scan tool. Air trapped in ABS can cause a spongy pedal and compromise braking. ABS pump bleeding is a must to restore optimal braking. If you are considering how to get air out of ABS module using a scanner, this video will be helpful. Other Autel scanners e.g. MK808, MS906 etc, as well as XTOOL and other scanners can also perform this task. I also show how to bleed brakes without removing tires.
Get from Amazon:
- Improved MP808TS - amzn.to/3J96Ss1 (use DIYMP808ZTS for 8% OFF!)
- LOKITHOR JA300 4 in 1 jump starter air compressor tool: amzn.to/38hzu2d
- Honda DOT3 brake fluid - amzn.to/3ClhqPZ
- 8mm/10mm flare nut wrench - amzn.to/3TabwI0 (Not the one used in the video, but it's good!)
I may earn a small commission from a purchase made through the link above. This does not increase the price you pay in any way.
Timestamps
0:00 - Intro
0:35 - What you should know & tools
1:04 - Setting up
3:05 - ABS modulator bleed procedure
4:00 - Wrapping up
#brakesystems #Autel #diyautoworksng #diymechanic #diycarrepair - ยานยนต์และพาหนะ
![[TH] 2024 PMWC x EWC Main Tournament Day 1 | PUBG MOBILE WORLD CUP x ESPORTS WORLD CUP](http://i.ytimg.com/vi/f5Coja1zCzo/mqdefault.jpg)
What's your experience bleeding ABS, with or with a scan tool? Let's talk! Hope this was helpful.
Never done a brake bleed with a scan tool. Hoping to do it on the next brake job coming up soon.
Super!
I purchased a maxi-check pro about 4 years ago and tried to bleed the brakes on a 2003 Ford Taurus , and it said that it was not communicating with the vehicle.
Best abs bleed video on you tube I’ve seen so far!
Thanks, mate!
Lovely video mate - fast, concise and complete. Thanks and good health!
You're welcome! Thanks for taking the time to leave a comment!
Man, these videos are invaluable! Thank u sir 👍
Thanks! 🙏🏼
Wow you used the right wrench, good job 👍🏽
Thanks, mate! I love tools😊
Thanks for sharing the knowledge
You're welcome
Thanx for the clarifying vid!
Glad it was helpful!
Great video
Thanks a lot, Kevin!
Nice video. On a side note, I'm just eyeing that Bosch battery 🤩.
😂😂😂🤣🤣🤣 Very reliable battery. Best I've used to date!
Thanks for the compliment. 🤛🏼
Very helpful video. 👍
You're welcome!
Nice job Sir, I've followed you for over a year now. I have the MP808ts. Wouldn't be bad if am able to communicate with you privately.
Thanks! I'm @diyautoworksng on Instagram
Perfect
👌🏼
Nice clean socks and shoes!
🙈 Lol
Thank you for the very informative video.I would like to know if the one person break bleed method ( catch bottle and tube only) with no pump can be recommended to flush the break oil? My car is 2018 Japanese model with ABS? I have the oil which came with car and is +4 years now.Can do it my self? Thank you?
The no pump or gravity method can work, it just takes a long time in comparison. If the brake fluid is sealed, it should still be good. If it was opened or the seal is broken, it's not recommended for use.
Hi,
I got one of launch scan tool for honda and for 2019 civic bleeding procedure is not available but in abs system I can activate modulator for each wheel but there is 2 option( solenoid and VSA) and both activate modulator and vsa last longer and more noisy do you know which one will push the fluid?
00:35 you didn't have to flex on us that hard with those sneakers 🥵
😂😂🤣🤣🤣 Oh well!
Ya!! 😳
Questions this is for electronic Breaks and not Hydrolic breaks? Also would you happen to know if this Scanner Tool can reprogramm non key fob keys? I have a 2005 Lexus ES300 and 2001 Toyota Sequoia.
This is for hydraulic brakes. Yes, the scanner can program keys to those cars.
As a matter of interest - when you watched the video, did you think he was bleeding liquid electricity into the plastic bottle?
Do you have to use the scan tool? Can you manually bench bleed it? Ive got a 2010 Impala and im about to put a new modulatoe in, im thinking about leaving the block in , and switching the motor and board. Recommended?
You mustn't use a scan tool, but the manual bleeding process is messy. Pumping brakes, opening and tightening the ABS brake lines for the air to escape (it will come with fluid). Not sure of the design of the Impala ABS unit, but if there's a separate electrical component attached to the pump (as in some models), you may be able to change just that part without disconnecting the lines. If the lines are removed, bleeding should be done. Ultimately, do refer to service recommendations from the manufacturer.
If I wanted to do a fluid exchange. Should I do the Honda sequence first on all 4 wheels then finish up with this on the front 2 wheels or start with this then do all 4 wheels. Thank you
Start with this, then do the 4 wheels.
I mean the method of one person pumping the break pedal until clear break oil appears in the bleeder tube? Do you recommend this method for DIY? Thank you.
Sure. Tried and tested method it is! Where a scanner/ABS bleed is necessary is if you replaced any components or replaced the ABS lines.
@@DIYAutoworksNG Finally, when you bleed using above method, does the engine need to be started during the pumping of break pedal.Thanks
Nope. Just ignition on.
*on my delphi diagnostic, it says that both bleed at the same time so that the abs pump is not stressed*
Cool
1:14 Does anyone know what the name of that warning sound is?
😂😂🤣😂🤣 Of all the sounds in the video?
It's called metal gear alert sound.
Hello, what about the rear brake ? Do you need to bleed them?
The ABS bleeding procedure with the scanner on this car does not involve the rear brakes, however, after the scanner procedure, you will be required to bleed all wheels manually following Honda's sequence.
@@DIYAutoworksNGso what was this now? Why manual? I dont understand
Remember that the procedure is focused on bleeding air out of the ABS itself, not the entire brake system and lines. The manual procedure takes care of air or old fluid in the brake lines.
I would like to buy a Scanner to my Viano 2.2 2014 163c Delphi ECU. Purge ABS, actuators, injector code, etc. Do you know if this scnner can do it?.
It should. You can confirm the supported services here autel.com/vehicle-coverage/coverage2
@@DIYAutoworksNG Like always mi Viano 2014 is not in the list. Thanks.
Ouch! Like always? Limited support on scanners generally or just Autel tools?
@@DIYAutoworksNG well, I don't know what scanner can do these works.
Hey so it says on my truck the ecu doesn’t support it what’s wrong
It means the test is not supported by the scanner on your car. Can be due to a number of reasons, the car may not support the test or the car does, but the scanner doesn't.
Just did an ABS bleed with scanner on my jeep wrangler. The scanner only had me bleed the right front and right rear tires then said the operation was complete. It didn’t ask me to bleed the other two tires. Is this normal?
Probably the way the ABS on the wrangler is setup. Mine only bled the front 2
Dang dude do your updates lol
Lol