Bmw M57n2 Valve float Issue solved
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- Welcome
Customer Brought his 2008 E91 330d stage 3 for valve spring upgrade.
Usual complaint of black smoke and struggle to hold boost in higher rpm.
Quite aggressive tune plus high mileage didn't help, but massive improvement over stock springs that are known issue on M57 engines when limits are pushed.
Just a set of Injectors and good tune and another great example for fun daily diesel that can put smile on your face and return 40mpg
Stay tuned and subscribe for future videos
Thank you for watching and your support!
What is the max boost on the stock valve springs, i have 1 series swapped with 35d engine and manual Gearbox, currently had 2.8bar boost with old tune, new one has 2.6bar on stock turbos
@@jerolehmuskoski5108 Probably about there, 2.5-2.7 depending on setup/30d or 35d what turbos ect
Great job!
Does the car needs a retune after a spring upgrade?
@@kikofus807 No, but ideally yes as more power can be squeezed out with upgraded springs.
Hey Nen Tech quick query regards your Stage 3 Garrett 3073 from Turbo Systems, did they take long to deliver the turbo?
I bought one a week ago and no sign of it being shipped yet 😢
Hi, mine was delivered in good time, like 3-4 days. That’s for first 3073.
What do you thing for "dbilas dynamic" performance valve springs on m57
Never heard of them
Zdravo imas link gde si kupio opruge ? Ovde u nemacku ne mogu da ih nadjem
nice work, if you change to the upgraded valve springs do you need a remap?
It’s not necessary, but if would benefit from remap as more power can be made due better control of gases.
@@NENTECHM57 thanks for reply, il go buy some soon :)
Bto, similar springs are installed on ford focus 2 1.6. 1.8
no timing tools needed? or to lock the timing in place? i want to do this on my 535d but im unsure if the valves will go down into the pistons
Camshafts are removed so will need to be timed up correctly, use Tdc to keep valves in place.
So you rotate the engine when cams is off to keep piston up so valves dont fall down yes?
@@isitgoodtodo2834 correct
Great video. No need to use compressed air to keep the valves close when removing and installing springs?
Could i purchase on of those valve spring compression tools of you?
I haven’t got any for sale unfortunately. There was a guy on m57 forum that sells 3d printed one
@@NENTECHM57 i got a file for one and have a guy 3d printing for me. Thanks for the reply and look forward to watching your new videos 👍
How much is it to drive in drive out springs buddy
Message me on instagram please
Can you do mine?
I’d fancy a roadtrip from Holland to England.
I can, message me on Insta
Done!
More videos
Will be, stay tuned
What springs did you install? what brand?
Patryk springs
@@NENTECHM57
sorry I didn't understand, I would like to understand where you purchased the springs and where I can find them
@@leonardogatto1299 Patryk Adamczyk , he makes them and does Specialist m57 upgrades
New channel name?
Yah man!