A Decent Vise For My Rosa Drill Press | Restoration
ฝัง
- เผยแพร่เมื่อ 15 ส.ค. 2019
- This vise came for free with the Rosa drill press I restored a couple weeks back. This kind of vises are most commonly used on mills but I decided to clean this up and get it back to use anyway because it's very solid, with very little play and overall well made. URSUS is a quality italian brand, same brand as the other italian vise I restored a while back (FZA).
The vise was already in pretty good shape, with just one broken bolt in the fixed jaw. Unfortunately it's made of cast iron, so there's not much I can do to fix the various drill holes on the bottom. The only fix I can think of would be some kind of epoxy resin as you can't weld holes in cast iron, not with stick welding at least! Of coure it can be brazed but I don't have the skill and equipment to do so at the moment.
Index of operation and materials:
0:11 Penetrating oil
1:20 I thought this was a dovetail... Time to engage brain!
2:20 Degreaser
2:47 Remove the thin film of rust on the exposed cast iron with wire wheel (cast iron does not rust deeply)
3:16 Small wire bit on the die grinder helps with hard to reach areas
3:31 Nitro solvant to degreas and clean before paint
3:35 Hammered finish black paint, same as the drill press
Clean small parts easily with ultrasonic cleaner
4:18 15min in nitro solvant to degreat and clean
4:40 15min in rust removal fluid to remove any rust
I use plastinc cups so I don't have to fill the entire ultrasonic cleaner with chemicals
5:15 Blackening the parts with cold blue
5:34 Final coat of oil
5:47 Cleaning threads with appropriate size tap
6:18 More degreaser
7:18 Thin anti-seize oil applied to all exposed steel surfaces
Making fixture for the drill press T slot
9:40 5mm thick mild steel bar stock
9:50 Cut two pieces with metal cutting band saw
10:05 Drill necessary holes
10:33 Tap for M8 bolt
10:46 Cut cornes and smooth those out with the 2x72 belt grinder
11:15 Removing mill scales and zinc coating from hardware with muriatic acid.
If you are looking to do this use care, do it outside in ventilated area and with all ppe, it's very bad stuff.
11:34 Neutralize acid with sodium bicarbonate
11:46 More cold blue
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
★Patreon★
/ blackbeardprojects
★Website★
blackbeardproject.com/
★Follow me★
Facebook ► / blackbeardprojects
Twitter ► / blackbeardproje
Instagram ► / black_beard_projects - แนวปฏิบัติและการใช้ชีวิต
Check description for a detailed list of operations and all product used.
If you like what I do consider supporting me so I can keep on making, join as channel member or check my Patreon for early access and voice-over edit of my videos. Thank you!
Amazing
Nice !
Whh didnt you weld cover those horrible drill holes in the base ?
black beard : i watch these videos in mind being that i was a guy who tore down engines air tools and hydraulic equipment and did some machine work it looks great i love this kind of stuff but on this video (again i know everyone is a critic) and i dont mean to be but i would of filled in the holes that have been drilled in the vice (welded and remachined) and used a caustic vat and then bead blasted everything and then oiled the parts and painted it on this project it seems like it could have saved you a lot of steps
You actually can stick weld cast iron. You need a preheat and post heat cycle, and use Nickel 99 rods.
I'm very happy to see a drill press vise. It's such a sadly overlooked but important piece of safety equipment in the shop.
I like that you use the thing you're restoring to make parts for itself
I love the simple black!! Great work my friend!
I am impressed that you manage to keep your work top clean.
Multiple times watching this. Still a perfect restoration Alex
Beautiful work!-both press and vise! Enjoyed watching!
Beautiful restoration, Excellent job 👏👍
I love the way u take a part the drill press and assemble it again
Perfect for one you plan to use!!! Really nice job!
Thanks for the details in the description. Like the blueing process. Nice work.
Well done, Sir! Looks perfect on the Rosa drill press.
Nice tear down and clean up. Beautiful restoration.
Beautiful tool 😍 nicely restored. You are very talented Mr. Black beard 👊👌👍
Subscribed I would be glad if you subscribe me too 😉😉 Great videos btw 👍🏼
Love the work you do at fixing and make great job
Sos EL MEJOR
Saludos desde Puerto Madryn - Chubut - Argentina
Sweet little vise and good job rebuilding it.Thanks for sharing.
Nicely done! A very positive addition to that cool drill press. The hold down clamps were an unexpected but very sweet addition as well!
He doesnt have a moving bed tho, so I think mounting it solid will be an inconveniance in the long run...
Looks like a nice quality vice, well done!
Nicely done!
Most important, one more vise is saved 👍😄
What a nice vice design! Great restoration!
Hi BB. Another super job and a new awesome vice to go with your awesome awesome drill press Rosa. Stay safe and keep up the good work. 👍
Again a wonderful restoration man! :) The vice looks so pretty!
That was excellent, and very nice work. You have a good pair of hands.
great job was good congratulations good professional you are👏🏼👏🏼👍🏼
Nice work... amazing as usual
Vise - the most fabulous of tools.
Excellent practical maintenance for a nice little vise
Fantastically done
Great idea on the dogs you made to hold the vise... now I have to do the same. Love the channel..!
Perfect work
Magnificent as ever.
Fantastic videos from an avid watcher from the UK
Usually I'd agree with you but not so much this time 🤫🤫🤫.
Excellent restore!
Wow that turned out so nice
Nice work and very useful.
Crazy ! Keep the good work !
I enjoyed this. Looks like a very high quality vice!
Thank you my friend!
Excellent work.
What a nice piece it became :)
Another awesome vise restoration Sir!!!!!!!!!!
wow!! 드릴 프레스가 새것처럼 다시 태어났네요!!
Nice vise and a nice restoration!
That’s a a sweet looking vise. I envy you..
Great. So nice restoration
Great job!!!
That will be a helpful tool for sure.
Looks like the previous owner didn't know when to stop drilling.
clearly he had the piece flush with the vise and wanted a through hole. That's pretty basic.
He should probably have used a sacrificial piece of something underneath (sacrificial = that will be damaged / destroyed during the process, per design)
I was hoping he was going to fill in those drill spots.
@@xl000 "He should probably have used a sacrificial piece of something underneath"
Or some parallels.
The guy who did that wasn't the owner. You see this in shops and factories all the time. Employees treat the boss's equipment like left over dog turds because they resent the fact that they're not the boss.
@@BedsitBob Parallels on a drill press?
Dude. you must be the type of guy to use the most excessive ways to solve your problems.
Gracias por el aporte y vídeo, Excelente restauración ......
Very nice job and great vice
Nonostante ti sia costato un duro lavoro, beh per contro mi sono rilassato moltissimo. L’audio del video è ipnotizzante!!! Un abbraccio ragazzo d’oro!!!
Great job!
Another good restoration. I enjoy your tool restoration videos. It's great when you bring a neglected high quality tool back to a useful life. This vise will be a useful complement to the Rosa drill, whose restorationI also enjoyed. This vise looks like it is a good precision tool. The jaws fit well. Keep up the tool restoration videos. They are fun and informative Best regards from the USA.
Yes!!!!!! Another awesome video!!!!
Nice job.Excellent
I would love to find a vice like that, you're lucky!
Bravo, bravo, bravo, awesome..., Well done, you are an artist, unique and perfectly work, master done, It's a pleasure to watch this work! respect from the old BG. sori for my english.
Very good restoration 👍👍👍
Who thought he would weld up those divots and resurface it on the milling machine? You do great work brother!
I want to know how everyone of these guys restoring equipment can hammer at the same speed
It's just a skill we just sort of pick up... cus we're always hammerin hammerin!!
It's called the spinning thumb hold. Makes for faster repetitive hits. lol----JK. 👍
Tom Skaggs hammerite invented it
@@fargogemini694 Great invention. How many times did you hit your thumb before you perfected the working model? lol
I would rather know how is hammering on something considered a restoration? Almost everyone on youtube is doing a cleanjob and painting.
Excelente trabalho parabéns 👏👏🇧🇷🇧🇷🇧🇷
No blow torching! No big chemical tubs playing Tetris with!! No remaking tons of little bits!!! You must have been bored as hell the other morning LOL! Great stuff!
I have two bits of advice. The first is to use JB Weld to fill all those drill holes. The second is to buy or make a set of parallels to help with your drilling. Great video and the blueing came out really well.
Iit was a great video but I was surprized that you fill the holes that had been drilled in the base. Rregards Russell
Good work 👍
Awesome video!
Good job
Nice job bro, very cool
Good contribution and good video tutorial restoration the truth has been very well and functional companion greetings
I love it my Brother you are the Master of Restoration for sure,I will see your awesome videos again later much love Family and take care :)
Badass! Way cool.
Another great video 👍🏼👍🏼👍🏼
saudações do Brasil a todos. bom trabalho. retornou a vida. incrível como essa máquinas simples são tão eficientes. sucesso.
Very good job 👍👍👏👏👏👏👏👏👏
Nice! Great addition to the shop, thanks for sharing.
Cheers
Thanks for sharing that
I like the time lapses of the acid bath and the ultrasonic cleaner. Also, your trick of putting the cup of cleaner into the water bath of the ultrasonic is very clever. Thanks for sharing.
Excelent, marca URSUS !!!
Enjoyed your video and gave it a Thumbs Up
Well done. It appears you even restored that drill press. Once restored, I think the old equip. is superior to the new stuff.
Muy buena reparación,.
A mi gusto me hubiera gustado desaparecer las huellas de las brocas que dejaron en el asiento de la herramienta.
La reparación estuvo excelente ☺😊
Nice vice 👍
Great job and your drill looks awesome. For a quick fix on my vintage meddings i repaired the over shot craters on the table with chemical metal , it was only going to be a temporary job but 5 years on and it still looks the part so ive left it .
I like watch your videos in 2x velocity, makes more satisfying
Nice job
Cool use of the sonic cleaner I’m gonna do the same
No piękny zestaw kolego!!! Łapa leci w górę!!😁😁😁
pretty rad restoration; still i would have welded the old holes :). Thanks for sharing! :)
Juan Sebastian Muñoz Arango I think I know why he didn’t- the surface on which the top piece slides must be dead flat, or else it won’t close and hold properly. Getting that repair to be both clean and straight with most hand tools simply isn’t going to happen.
Besides, he might drill into it again by accident.
Great work.. Ciao
Very nice job:)
Iscrittoooo, sei un grande! 😍🇮🇹
Ursus and Rosa: A perfect marriage!
Fantastic,
¡Excelente!
Вот что значить,не лениться,респект тебе Дружище!
bravo!!!!
Молодец, красивая работа. 👍
Отличная работа
The press its much beatiful
Зачётные тисочки👍