Bill - Wish you had a show on Velocity. You do real work without bogus deadlines or scenes of "mechanics" proving they have no work ethic. (Coke can throwing contests ... really?) While it is true that you are promoting products with these videos, they never feel like the Velocity extended infomertials. They are quite educational. Well done.
I had to take off my blocking plate and reinstall my sound symposer. But I lost the oem rubber gasket. Will the rubber gasket on the blocking plate fit the same on the oem? The thing is I sold my blocking plate. If it's the same size as oem, is there any way i can buy just the gasket? I can't find it anywhere on ford oem parts. Or point me in a direction where I can get this gasket? Because I'm pretty sure I have a slight boost leak without it.
HEY CJ I have a 2016 focus st 250 mk3.5 I’ve just installed the GFB VTA and it’s constantly venting even at low revs I know on the FL models the symposer is already “deleted as OEM” Will I be able to fit this kit so I can run a true vacuum source? So that the BOV only vents under higher loads? Many thanks Paul
Will this give out the sound symposer code?? My car is currently detecting the sound symposer code And is making my abs go on n removing my traction control n removing my hill start assist also making my steering wheel very stiff when turning
About to do this delete today, thanks for the free delivery CJ Parts. Merry Christmas everyone
Did u have any codes thrown? Bout to do this little project too and was just wondering
Jeez, this was so straightforward and perfect. Very refreshing. 10/10. Thank you
Watched the video and then had the delete kit on in about 15 minutes. Much appreciated!
Bill - Wish you had a show on Velocity. You do real work without bogus deadlines or scenes of "mechanics" proving they have no work ethic. (Coke can throwing contests ... really?)
While it is true that you are promoting products with these videos, they never feel like the Velocity extended infomertials. They are quite educational.
Well done.
Thanks for the nice comments
Thanks, straight to the point!
So what if you want to run a vaccum line to an aftermarket bov? Is there another type block off plate you can order?
We offer several versions on our website, some with the vac line and some without.
I had to take off my blocking plate and reinstall my sound symposer. But I lost the oem rubber gasket. Will the rubber gasket on the blocking plate fit the same on the oem? The thing is I sold my blocking plate. If it's the same size as oem, is there any way i can buy just the gasket? I can't find it anywhere on ford oem parts. Or point me in a direction where I can get this gasket? Because I'm pretty sure I have a slight boost leak without it.
What’s the difference between the kit that comes with a port ?
HEY CJ I have a 2016 focus st 250 mk3.5 I’ve just installed the GFB VTA and it’s constantly venting even at low revs
I know on the FL models the symposer is already “deleted as OEM”
Will I be able to fit this kit so I can run a true vacuum source? So that the BOV only vents under higher loads? Many thanks Paul
Hey Bill, where did you zip tie the harness to?
Chris Garrity to the catless down pipe
Where did you zip tie it
Up and out of the way.
I CAN NOT find the harness you said to tie up. Idk if it fell already but I never heard anything and the symposer valve was not plugged in.
what kind of sound difference is there with the stock exhaust and vs aftermarket exhaust?
We have lots of Focus ST exhaust videos on here including a comparison video with several popular options.
This is the best $25 I've spent so far on my focus st
did it make any road noise go away? or just some of the pure engine noise?
these are prone to leak boost too so best mod you can do
I bought the cobb kit and it did not come with the O-ring and cabin cap wtf
The video states to use the o-ring from the stock symposer
Lolll
I had to use a laundry soap cap lol
can we use the factory o ring on the aftermarket one?
Is this exactly the same on Euro/UK cars?
It should be, although the routing of the symposer tube might be different if it’s a right hand drive focus
Hey Bill, is there a difference in sound inside the cabin in a stock car?
You will lose a little sound with a stock intake, if you have an aftermarket intake you will not lose anything.
I need those wheels
What wheels are those?
Will this give out the sound symposer code??
My car is currently detecting the sound symposer code
And is making my abs go on n removing my traction control n removing my hill start assist also making my steering wheel very stiff when turning
Avidd Lemus that doesn’t sound like it could be caused by the sound symposer. Sounds more like a wheel rotation sensor.
Did you ever get rid of the sound symposer code ?
anyone else noticed bill flash on screen at the second, for a frame or two
13-14 or 13-18?
The engine is the same from 13-18 so I would assume it would be the exact same
What tools do you need outside the wrench
why delete it ?
Kusqen once you install cat back and/or intake, the cabin drone is ridiculous. This helps a lot
as stated in the video, when you modify your vehicle with Intake and exhaust there's no need for it.
Weight reduction bro
Kusqen it’s basically a suparcherger
If nothing else, it just cleans up the engine bay a bit more which is ALWAYS a plus..especially for under $30.