Very informative videos. One question what is difference between Back up load and on grid home load? I only have home load, if so where does it connect?
@@drsolar it definitely did, and just today my charge rate jumped to 25a. I'm going to buy extra batteries as you advised. Soon il be off the grid just like you. Dr solar i hope with your new endeavors it allows you to go more into solar panels and battery combinations as well. God bless 🙏 my brother
I have been following and watching your Deye inverter videos... i think Deye is one of the most reliable Chinese inverters in terms of design, built and performance. I am using the same model as yours, and all the information and observation you are saying and claiming about your 5kw Deye hybrid are true and accurate based on my experience here. I hope you can still continue to make videos of Deye along with your new product, Sola X. Good luck
Thank you for watching and commenting. They have done a fantastic job with the product and the price point is spot on. I go to sleep every night with the knowledge that I have no worries about reliability. I am glad that you are enjoying the inverter, I have enjoyed it. Can't wait to put the SolaX to the test.
Very informative. Would you be able to do a video demonstration for power saving. So no solar panels. Grid tie and batteries. I'd like to see how the timer can be programmed so that batteries discharge during peak hours 7am-10pm and batteries are charged during off peak hours. 10pm-7am. Is that done via the time of Use time setting. Thanks.
Thank you for watching and commenting on this video. I won't do a Deye video because it is no longer the primary inverter that we install.. The time of use allows you to do things like what you wrote about.
Congratulations Dr Solar. You've really done a lot for Deye and the rest of the us but I understand that at the end of the day, bills must be paid. The SolaX range is of those inverters I don't understand but I'm sure I'll learn a lot from the exposure you'll give them.
Thank you so much. I won't knock Deye. They will do what works for their brand. They want to move as many as possible. A high end Axpert model. The SolaX is a high voltage inverter. They offer you a complete solution. From inverter to battery. They have the sizing that fits our clients. As little as 3 kw and as much as 15 kw three phase. They have batteries that fit too. 3 kwh up to 9 kwh. We will only offer the 5.8 kwh. Wat I like is the X-ESS. Can be installed in as little as 30 minutes and comes with box that manages all your connections. Battery disconnect, PV disconnect, CT and RCD's
Hi. What setting do I use so that my inverter knows to use the solar first and then use the batteries afterwards when I have no grid connection? Also, is there a reason why the solar is showing 0kW on the home screen? Love your videos, thanks in advance.
hello, congratulations on your channel👍, I have a question. I have a 6 kw single-phase deye inverter to which I connected 3 pylontech us 3000 but I think there is some problem with the parameters I enter could you help me? my parameters are: battery capacity 200ah, 37 max charge 37 max discharge did I do something wrong? or should I insert 78 ah battery capacity or the single one? Thank you very much.
Your charge and discharge settings are too low. Look on inverter and see what it is telling you it should be, then do 20% less. On the main screen touch battery and read BMS data
Hello Dear.. Thank you for this helpful video.. I have one question : please i would like to know how to set up my acid batteries to be discharged only to 50% to protect them on deye inverter...
Use battery voltage..set you lbco to the corresponding value that matches 50 %. I have not used a lead acid battery in over 3 years so I don't remember that number.
@@drsolar ok thank you very much.. Please one more question how can i set the inverter to get the grid first when come and then when the grid off to get pv?? Another questionWhat is the span life of acid battery in solar system with 50% of discharge?
hello Dr Solar i want to ask when you have battery settings grid charge mark grid signal mark charge start 30% but in time of use you dont make grid charge what it will happent? IT will start charging when capacity below 30% or it will not?
Hello. I hope you are doing well. I’m having a problem with the fans are not running and it’s saying temp high. And it’s not giving electricity even if I restart the inverter. Thank you
Hi my inverter wont take and power from the solar only from the grid It got stuck in shutdown status (for generating power) Do you have any tips how to take it out from that status
@@sky2.040 thank you for watching and commenting. I would turn all the breakers off. The turn of the inverter. Turn the battery off. Turn the battery on. Then the inverter. It should start working. Then turn on the breakers
Honestly I am not 100% certain but my guess is that you don't want to export any production you have to reference it somewhere. So the CT that measure the grid or your load that consumes. I will get a smarter answer for you
That is correct. In addition, if you set the Deye inverter to Zero export to CT, the inverter will work as grid tie inverter, however it will not allow your generated power from solar or battery to export back to the grid. The solar power or battery power will be be distributed to all loads inside the house as gried tied principle. Having said that, the load/output of the inverter also works as gridtied. Should there be a power failure, the built in offgrid inverter of Deye will turn on and distribute the power to the load/output of the Deye which takes about 4ms switching time similar to UPS function. Any excess solar power production will charge the battery depending on the SoC, or you have an option to activate the smart load to dump the power. As for the Zero export to load setting, this works as purely off grid inverter. Even there is a grid input, the solar power production will only be distributed to the load/output of the inverter. This setting is very suitable if you wish to live offgrid similar to Dr. Solar. Hope this helps.
Thank you for watching and commenting. I have no experiences with welders so I can't answer with authority. However on some installations we have done they have been accidentally used without issues. Don't forget to subscribe.
Hi guys. I have a problem paralleling 2 Deye Hybrid inverters. When running master in its own all is good, but as soon as parallel is ticked (1 master one slave) master inverter switches from on to off on display. 1 string each, battery cables connected, inverter parallel cable installed. Any advice?
Thank you for asking. They have a different model. They are more focused on moving product and not on relationships. SolaX Power wants a quality network with very good support for the product. Thanks for watching to the end
@@drsolar , that's the problem from where I am Deye, doesn't really have a certified distributor. Different sellers sell Deye and if there is problem or repair no guarantee if they will support. If you come across shady resellers your in bad luck. Buyer may be responsible in shipping to Deye. If they have a certified distributor with good after sales support that would be ok at least. Luxpower, they have distributor and service support. Good to know you closed a deal with a new company solax that cares for you.
@@nestyplus that is what SolaX wants to avoid. I get lots of phone calls and emails from people looking for support for the Deye inverters. SolaX Power wants the support to be provided by trained and dedicated providers
Hello i have setup the battery percentage that the gen should start charging them, but when the gen is on it is completely ignoring the setup and start charging, do you know why and how to fix it ? thank you in advance.
Hi my deye is not picking up ac grid connection, the voltage is 217 v on the input breaker once inverter turns on voltage drops to 4 volts any suggestions
Good morning Amir I am stumped. Double check your breaker and connections. Check the breaker for continuity. Then check your wiring. If it checks out confirm polarity. LNE. If that fails use the gen port to eliminate that the inverter is the problem. Start with the breaker and your connections first.
@@drsolar thank you for your reply, i added the batteries but i can see a 220 V load on the home icon, im checking if there is any malfunction in the electronic part or i missed any software configuration. Thank you
When u add the batteries, turn on the inverter you should see the V of the batteries which is 55.6 lets say and the output (which its call LOAD or Home icon on the inverter screen) 220V, im still getting a 0V for the output, that's it dear
Hello I have an deye inverter 5kw the internal fan working without any load and the battery full charge why the fan work? And this only in the morning for 2 and 3 hours work the fan. This is normal?
What percentage did you ask it to start charging? Go to your battery settings and where you set the start charge current, check the start percentage. If your battery does not get to that number it won't charge. Please share my videos with your friends and family and if you have not subscribed, do
Very informative videos. One question what is difference between Back up load and on grid home load? I only have home load, if so where does it connect?
👏 Congratulations on your new business venture Dr Solar. Thank you for this video as it answered all and more.
Thank you very much. I appreciate you. I made the video for you. Glad it answered your questions
@@drsolar it definitely did, and just today my charge rate jumped to 25a. I'm going to buy extra batteries as you advised.
Soon il be off the grid just like you.
Dr solar i hope with your new endeavors it allows you to go more into solar panels and battery combinations as well.
God bless 🙏 my brother
@@LekaLEL glad to hear it charging at full tilt. I am excited about the new direction that we are taking. Thank you brother. Remain safe and healthy
Good luck in you newest venture and I will continue to keep watching and seeing how your new equipment works and stands up
Thank you very much for watching and the good wishes. I will be running them as soon as I get them. Thank you again
I have been following and watching your Deye inverter videos... i think Deye is one of the most reliable Chinese inverters in terms of design, built and performance. I am using the same model as yours, and all the information and observation you are saying and claiming about your 5kw Deye hybrid are true and accurate based on my experience here. I hope you can still continue to make videos of Deye along with your new product, Sola X. Good luck
Thank you for watching and commenting. They have done a fantastic job with the product and the price point is spot on. I go to sleep every night with the knowledge that I have no worries about reliability. I am glad that you are enjoying the inverter, I have enjoyed it. Can't wait to put the SolaX to the test.
Very informative. Would you be able to do a video demonstration for power saving. So no solar panels. Grid tie and batteries. I'd like to see how the timer can be programmed so that batteries discharge during peak hours 7am-10pm and batteries are charged during off peak hours. 10pm-7am. Is that done via the time of Use time setting. Thanks.
Thank you for watching and commenting on this video. I won't do a Deye video because it is no longer the primary inverter that we install.. The time of use allows you to do things like what you wrote about.
Congratulations Dr Solar. You've really done a lot for Deye and the rest of the us but I understand that at the end of the day, bills must be paid. The SolaX range is of those inverters I don't understand but I'm sure I'll learn a lot from the exposure you'll give them.
Thank you so much. I won't knock Deye. They will do what works for their brand. They want to move as many as possible. A high end Axpert model. The SolaX is a high voltage inverter. They offer you a complete solution. From inverter to battery. They have the sizing that fits our clients. As little as 3 kw and as much as 15 kw three phase. They have batteries that fit too. 3 kwh up to 9 kwh. We will only offer the 5.8 kwh. Wat I like is the X-ESS. Can be installed in as little as 30 minutes and comes with box that manages all your connections. Battery disconnect, PV disconnect, CT and RCD's
Hi. What setting do I use so that my inverter knows to use the solar first and then use the batteries afterwards when I have no grid connection? Also, is there a reason why the solar is showing 0kW on the home screen? Love your videos, thanks in advance.
You can do time of use.
hello, congratulations on your channel👍, I have a question. I have a 6 kw single-phase deye inverter to which I connected 3 pylontech us 3000 but I think there is some problem with the parameters I enter could you help me? my parameters are: battery capacity 200ah, 37 max charge 37 max discharge did I do something wrong? or should I insert 78 ah battery capacity or the single one? Thank you very much.
Your charge and discharge settings are too low. Look on inverter and see what it is telling you it should be, then do 20% less. On the main screen touch battery and read BMS data
Interesting. How do I enter into the settings? How do I change the battery voltage?
Touch the thing that looks like a sprocket top right corner of the screen
Hello Dear..
Thank you for this helpful video.. I have one question : please i would like to know how to set up my acid batteries to be discharged only to 50% to protect them on deye inverter...
Use battery voltage..set you lbco to the corresponding value that matches 50 %. I have not used a lead acid battery in over 3 years so I don't remember that number.
@@drsolar ok thank you very much.. Please one more question how can i set the inverter to get the grid first when come and then when the grid off to get pv??
Another questionWhat is the span life of acid battery in solar system with 50% of discharge?
hello Dr Solar i want to ask when you have battery settings grid charge mark grid signal mark charge start 30% but in time of use you dont make grid charge what it will happent? IT will start charging when capacity below 30% or it will not?
Thank you for watching and commenting. I have not tried so I don't know what will happen. I will try it on a client
Thanks you i am waiting for your reply
Any product you introduce we will buy, meaning I will start recommending solar x power inverter to people. Congratulations once more
You rock. Thank you so much. I am so excited at the opportunity to work with them. Please help me grow the brand
@@drsolar we will definitely support you.
Did a deye inverter 8.8kw has a ac bypass function?
@@MyDreamsLullabies it is automatic. Thank you for watching and commenting
@@drsolar how many percent load can I connect to deye if
The ac charging is enabled. ?
I have 16kw deye setup
Is it safe connect 50 percent load ?
Tnx
Hello. I hope you are doing well. I’m having a problem with the fans are not running and it’s saying temp high. And it’s not giving electricity even if I restart the inverter. Thank you
Thank you for watching and commenting. Tell your supplier to update the inverter firmware.
Hi my inverter wont take and power from the solar only from the grid
It got stuck in shutdown status (for generating power)
Do you have any tips how to take it out from that status
@@sky2.040 thank you for watching and commenting. I would turn all the breakers off. The turn of the inverter. Turn the battery off. Turn the battery on. Then the inverter. It should start working. Then turn on the breakers
Hi Dr Solar, what is the difference between Zero export to load vs Zero export to CT? Thanks
Honestly I am not 100% certain but my guess is that you don't want to export any production you have to reference it somewhere. So the CT that measure the grid or your load that consumes. I will get a smarter answer for you
That is correct. In addition, if you set the Deye inverter to Zero export to CT, the inverter will work as grid tie inverter, however it will not allow your generated power from solar or battery to export back to the grid. The solar power or battery power will be be distributed to all loads inside the house as gried tied principle. Having said that, the load/output of the inverter also works as gridtied. Should there be a power failure, the built in offgrid inverter of Deye will turn on and distribute the power to the load/output of the Deye which takes about 4ms switching time similar to UPS function. Any excess solar power production will charge the battery depending on the SoC, or you have an option to activate the smart load to dump the power. As for the Zero export to load setting, this works as purely off grid inverter. Even there is a grid input, the solar power production will only be distributed to the load/output of the inverter. This setting is very suitable if you wish to live offgrid similar to Dr. Solar. Hope this helps.
@@onortrebor Very clear explanation. Do we still need to install a CT if Zero export to load is set ?
If Deye 8kw is used as offgrid. Can it handle inverter type welding machine? Thanks a lot.
Thank you for watching and commenting. I have no experiences with welders so I can't answer with authority. However on some installations we have done they have been accidentally used without issues. Don't forget to subscribe.
Thank you Sir
Hi please how could you change the voltage output of deye 8kw inverter from 230v to 220v
Yes you can
Hi guys. I have a problem paralleling 2 Deye Hybrid inverters. When running master in its own all is good, but as soon as parallel is ticked (1 master one slave) master inverter switches from on to off on display. 1 string each, battery cables connected, inverter parallel cable installed. Any advice?
Thank you for watching and commenting. Check to make sure that they have the same firmware versions
congrats good for you and your company, does make me wonder why you didnt make the same deal with deye.
never mind, i should watch till the end :)
Thank you for asking. They have a different model. They are more focused on moving product and not on relationships. SolaX Power wants a quality network with very good support for the product. Thanks for watching to the end
@@drsolar , that's the problem from where I am Deye, doesn't really have a certified distributor. Different sellers sell Deye and if there is problem or repair no guarantee if they will support. If you come across shady resellers your in bad luck. Buyer may be responsible in shipping to Deye. If they have a certified distributor with good after sales support that would be ok at least. Luxpower, they have distributor and service support. Good to know you closed a deal with a new company solax that cares for you.
@@nestyplus that is what SolaX wants to avoid. I get lots of phone calls and emails from people looking for support for the Deye inverters. SolaX Power wants the support to be provided by trained and dedicated providers
Hi . Did deye have low frequency inverter ?
Thank you for watching and commenting. I am not aware of any
Hello i have setup the battery percentage that the gen should start charging them, but when the gen is on it is completely ignoring the setup and start charging, do you know why and how to fix it ? thank you in advance.
Thanks for watching and commenting. Do you have the generator connected to the gen port?
@@drsolar Yes it is connected to the Gen port.
Check your time of use settings
Hie I have a8kv deye inverter it keeps on beeping but alarm ligths off on display, also it display normal what might be the problem
Beeps when it is doing what. What is the battery percentage when it is doing this?
Hi my deye is not picking up ac grid connection, the voltage is 217 v on the input breaker once inverter turns on voltage drops to 4 volts any suggestions
Good morning Amir I am stumped. Double check your breaker and connections. Check the breaker for continuity. Then check your wiring. If it checks out confirm polarity. LNE. If that fails use the gen port to eliminate that the inverter is the problem. Start with the breaker and your connections first.
Hello , the batteries for my inverter isnot charging. In my inverter I can read F56 fault. What can I do?
Low battery voltage. What type of battery do you have? What did you set you Gen or grid charge voltage or percentage to?
@@drsolar Greenrich Battery 51 v
@@benmatus1503 double check that you have BMS communication
How to solve the error 56 or no battery
Do you have a battery?
Hi Dr Solar
Pls my Deye inverter show grid is off. What should i do please. Thanks
Check your grid input breaker. Thank you for watching and commenting
Hello sir, i have put the batteries and it shows 55.6V however my load is 0V any help plz?
I need more information from you. Please explain what you are looking at and what you are looking to acomplish
@@drsolar thank you for your reply, i added the batteries but i can see a 220 V load on the home icon, im checking if there is any malfunction in the electronic part or i missed any software configuration. Thank you
@@abdobejjani2699 what are you expecting to see. I don't quite get what the problem is.
When u add the batteries, turn on the inverter you should see the V of the batteries which is 55.6 lets say and the output (which its call LOAD or Home icon on the inverter screen) 220V, im still getting a 0V for the output, that's it dear
So im not getting an output at all even i have added the batteriea
My deye is now lighting the normal mode led lindicator
Should I say congratulations?
Congrats
Thank you OGW
Hello I have an deye inverter 5kw the internal fan working without any load and the battery full charge why the fan work? And this only in the morning for 2 and 3 hours work the fan.
This is normal?
Yes it is normal for the internal and external fan to come on
Thank you 🙂
Thank you
How to charge pylontech till 90% only because once it reaches 100% it given Dc LLC over current fault.
BMS is connected
Thank you for watching and commenting. What inverter are you using?
@@drsolar nitrox 5kw
Congratulations
Thank you
How set up the wifi?
Hello Glen thank you for watching and commenting. There are so many videos on this subject. Deye has one on their channel.
HI. My DEYE "Grid Charge" is not working. Even if I set to Grid Charge (checked) in the Time of Use. What's the possible problem?
I set the time from 00:00 to 05:00, Grid Charge Checked. But still during that time, my battery is still discharging.
What percentage did you ask it to start charging? Go to your battery settings and where you set the start charge current, check the start percentage. If your battery does not get to that number it won't charge. Please share my videos with your friends and family and if you have not subscribed, do
This is the sol-aek inverter
The same factory makes them
❤
Thank you for watching
Awwww please not Ghana?
Someone already covers your market. Thank you for watching and commenting