Repaired All The Annoying Things On My 944 - Porsche 944
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2022
- @satsmotors / satsmotors
SUBSCRIBE NOW! bit.ly/2VwQ178
There were a few small things that needed attention on my 944. Those small things took a lot of time to repair. Started with a thermostat change. Used a 80°C colder thermostat. Changed out the heater control vale. The old one didn't close anymore. There was a crack in the cooling system vent valve housing. So that needed to be replaced. Then vacuum bleeded the cooling system so I would get all the air out of it. Tried to replace the blower switch with a VW one. This didn't work out. VW switch was different. Installed a new OE windscreen washer pump. Used a Mercedes-Benz truck oil pressure sensor to replace the one on the 944. Direct fit. And finally glued the rear window back to the frame.
Thermostat - 944 106 129 05 - 12 EUR
VW Golf 1 Heater Control Valve - 211 819 809 - 8 EUR
VW Golf 2 Blower Switch - 321 959 511 A - 4 EUR DID NOT WORK
VDO OE Windscreen Washer Pump - 246-075-021-006Z - 52 EUR
MB Truck Oil Pressure Sensor - A 002 542 17 17 - 14 EUR
Porsche 944 playlist - bit.ly/3kDq2d9
BMW E65 760i playlist - bit.ly/2Vveh9K
Opel Corsa OPC playlist - bit.ly/3nPSEP4
Volvo 960 playlist - bit.ly/2SACOIQ
Contact us - SATSmotors@gmail.com
For extras visit my Instagram - bit.ly/2VwQ178 - ยานยนต์และพาหนะ
![อยู่ได้แล้ว - LIPTA feat. Mirrr [OFFICIAL MV]](http://i.ytimg.com/vi/-9-hpntNym4/mqdefault.jpg)
Thanks for the video. The window reseal is the next task ahead of me. Clutch, shocks/struts, belts/waterpump/etc all done.
I fully removed the rear window from the frame and resealed it about 4 years ago, but the adhesive did break from the top side. Make sure you clean and primer the surface well and use a thick bead of adhesive overlaying the glass about 5 mm from the inside.
@@SATSMotors Sorry to hear that the sealant failed. We 944 owners continue to look for a solution to this issue. I've purchased Dow Automotive 5504GML10 Beta Prime Glass Primer and 3M Auto Glass Urethane Windshield Adhesive, 08693 (Medium Viscosity, High-Strength, Fast-Curing) for the future repair. We'll see how it holds up.
It’s sunlight that degrades the adhesive, I did a strip of plasti-dip over the adhesive on the glass to keep the sun off of the adhesive to prevent delaminating
Show love to the cars and they will last forever.... my mom owns a Kia for 14yrs and still working, perfect example. Its not the car, its the owner 🎉
Well said!
Jake Ryan of sixteen candles would be proud! 👏
Should paint the 944 red then :D
Thanks good job one little thing at a time
Repair some and new issues will come
The fan on a 924/944/968 will still run in the off position, it always runs very slowly to circulate air in the cabin. It constantly runs with the ignition on .
That's a really good information. Need to replace the fan then. It squeaks when the switch is in off position.
Unwatchable! Music is terrible / distracting. I lasted 1 minute