2019-2022 Silverado 1500 K&N Series 77 High Flow Performance Cold Air Intake Review & Install

Command the streets with newfound confidence with the help of K&N’s Series 77 High Flow Performance Cold Air Intake. By replacing your Chevrolet Silverado 1500’s factory air intake, you’ll be able to hit higher horsepower and torque numbers, as well as enhance your truck’s road presence.
No Tune Required. K&N engineered their Cold Air Intake to improve the performance of your V8 Silverado without the need of reprogramming your computer. By utilizing flow dynamics, this Intake will increase power using the original factory tune. Even though a re-tune is not required for operation, AmericanTrucks recommends a custom tune to reprogram the vehicles computer (ECU) to get the best possible performance from this Cold Air Intake.
Uses a High Flow Air Filter. Since the air filter in this cold air intake boasts a high flow construction and rating, your engine will consistently receive cooler, cleaner air. As a result, you can rest assured that your Silverado 1500’s engine will remain in great condition even during high-operating driving conditions.
Incredible Air Intake Build. The Series 77 High Flow Performance Cold Air Intake features a mandrel-bent aluminum intake pipe that’s covered with a bright aluminized metal finish. It also comes with a heavy-duty heat shield that effectively protects the air filter from engine heat. Thanks to these components, this cold air intake makes a great addition to your truck’s powerful setup.
Easy, Bolt-On Installation. Installing this cold air intake doesn’t require any drilling, so anyone with light mechanical skills and basic hand tools can take care of the procedure with ease. The entire task will also take no more than an hour to complete.
Covered by a 1,000,000-Mile/10-Year Warranty. This cold air intake is backed by K&N’s 1,000,000-mile/10-year warranty. This, however, only covers defects in materials and workmanship. Interested to know more about the warranty’s terms and conditions? Then check out the manufacturer’s website or contact customer support.
Not CARB Certified. This K&N Cold Air Intake is not CARB certified, therefore it is not legal for use in California or other states adopting California emission standards. Not legal for use on pollution controlled motor vehicles; not intended for highway use.
Application. K&N’s Series 77 High Flow Performance Cold Air Intake fits 2019-2022 Chevrolet Silverado 1500 models equipped with the 5.3L V8 engine. amtrucks.at/3u...
0:00 - Review
4:06 - Install
Item S114129-53
----------------------------------------------------------------
🎞Subscribe for Daily Truck Videos: bit.ly/atcgrsub...
Stay in the loop for other truck content:
Instagram: bit.ly/2pReXWs
Facebook: bit.ly/2pBz6AC
AmericanTrucks.com is your home for everything truck! Our team of experts is here to help you find the newest and top mods for your Chevrolet Silverado, GMC Sierra, RAM, and Ford F150!

[@AmericanTrucksChevyGMC]

Shop this K&N Series 77 High Flow Performance Cold Air Intake! : amtrucks.at/3uJXJ1h

[@Computernerd1200]

Amazing intake! The sound change on my 6.2L V8 is how I feel they should come from the factory. Hopefully my fuel economy improves with this modification, 5/5 so far!

[@AmericanTrucksChevyGMC]

Awesome to hear! Thanks for watching! -Zach

[@JK-ck8qg]

I'm following instructions, but trying to remove the air intake box. Removed the throttle body connector, tube connector to air filter box and PCV valve. My air intake box also is connected to a bracket coming off the alternator. I cannot find how to release that connection. ANY thoughts? I don't want to just tear it off, in case I decide to put OEM back on later.

[@edscorsese]

Were you able to figure it out? I'm stuck on that part

[@jayr.1523]

I did everything right but I'm burning hella fuel

[@WrenchingMafia]

Did your fuel economy go down??

[@jponyboyace]

Got a 19 6.2….will it work?

[@AmericanTrucksChevyGMC]

This cold air intake is specifically made for the 5.3L V8, it will not work on a 6.2L. You should check out our site AmericanTrucks.com for options that fit! -Zach

[@Computernerd1200]

Do you guys sell the K&N 77 Series (77-3110KP) for the 6.2L? If so is there a bump in noise after install?