Dude he loved holding onto that bar I couldn’t get it away from him lol any time I work on a RC he wants to sit up there in his chair an watch an help…. Yeah these are some AWESOME parts can’t wait to do the typhon up an I will be getting a 2wd ARRMA vortek to do a EPIC conversion build 4x4 4s VORTEKS gonna rip lol
I have Kraton 4s also and will get these upgrades as well. What ESC would you recommend for Team Corrally Skeeter 2150kv motor? Saw someone installed the same motor and paired it 160a ESC. I don’t really bash hard but would definitely do these upgrades for my Kraton. Thank you much.
Well, I have ordered just about everything that you have displayed for my Kraton. Now I am ordering the m2c hubs. Curious, what ever happened to the octave bumper parts? I saw you had failures, but I read he was coming out with steel drive hubs, as the aluminum ones bent. Thank you😊
@@frederickgrassie3383 so as of now I still run the inner ones on the diff side on both my outcast and kraton I recently talked to him and he showed me some pictures of the new ones and said he will send them out, but I've not seen them yet
@@RC4us I contacted him, he has the steel wheel axle, and aluminum diff hubs instock. I can't figure out his money but I think complete set is $120.00 delivered by DHL.
Hi Mike, I wanted to know if you could give me the correct part numbers for the vitavon front and rear hubs. I looked at their web page, and just want to double check the numbers with yours. I've ordered on line before from China , and trying to exchange items are not pleasant, if necessary. Or is there an alternative parts in the USA? Thank you very much. Love your videos.
@@frederickgrassie3383 so theirs not many parts on vitavon website for the 4s line and they only list them as KRATON 4s but what I see as part # on his website is blx003, blx4s02, blx4s01 that's all 3 have fun buddy and thanks for always watching
Well to be honest I’ve not got to run it went yesterday an only ended up getting to run the sledge an today has been a complete wash out it’s rained literally all day…. But like you them hex’s should really help the handling
Well they actually come with the m2c chassis brace that’s what I’m using they are beveled on the one in to fit where the screw head was…. An OKTAY’s bumpers come with them as well I think
@@nazmulhutha8657 they do make them they’re a little harder to get here in the USA am not as cheap as the m2c but my old brace was OKTAYs bumper an more easy find on facebook
Mike, I have to agree with you that the M2C Hex Extensions make a great impression! I'm curious to see what your experiences with them are, if the "wider" track causes a noticeable change in the driving behaviour! I have another question about the !front! VITAVON steering levers, these consist of two parts, whereby on the Vitavon side the "VITAVON CNC alu C Hub For BLX 4S : KRATON / OUTCAST" is described as "Only for V1, NOT for V2. How did you combine the C Hub & Steering Block/knuckles? Did it work plug and play contrary to Vitavon's description or did you have to make past adjustments? I would be very interested in this, because I would also like to order them for the front and rear, but I am unsure about the description, so I look forward to your feedback! Do you plan to adjust the oil of the dampers with the latest changes, will it stay at 70/80WT or what did you use last? Best regards !
So when it comes to the hubs their isnt a difference in the hubs the v2 carries over from the v1 like if you look up hot racing they’re the same as always b4 idk why vitavon even brings up v1 or v2 I think it’s only to tag on web browser look up but idk…. Just my guess With being said it went together just like stock
@@RC4us Perfect, thank you very much, then I will place my order later! As for the M2C engine mount and the BashBar, I've already installed them and am absolutely delighted with the fit and (workmanship) quality! It's a pity that no pictures can be published here on TH-cam, that would often be very helpful! What I can also recommend to you as a sensible tuning are the HotRacing pivot balls (set), which are much more durable than the original ones made of plastic and also better for the steering!
@@MrYoEddy yes those are a great option for sure but the reason I don’t use them is because then you wear out the actual rod end an not just the pivot ball… the pivot balls are cheaper then the rod ends
You can but not like this the v2 an newer use different driveshaft the best way would be to convert it to the v2 drivetrain an then use these hex adapters
Did you do the suspension pin mod?? Other than that you just need to land flatter and don't cartwheel it.... in almost 2 years I've broken 1 arm and it was the rear on my b2 KRATON 4s
@@JackstandDan Dominate Any Terrain Upgrading Suspension for ARRMA OUTCAST 4s v2.5 with @m2cracing168 @ARRMARC th-cam.com/video/fsHUmty4I-Y/w-d-xo.html
I have the proof I ran the hot racing for awhile almost a full year an with the m2c one it’s fits better an really locks everything together like it should that spine brace once attached to chassis an the motor plate it’s solid
Awesome install video!!! can't wait to see her fly!!! that kids got great taste in parts , just like hid dad!
Dude he loved holding onto that bar I couldn’t get it away from him lol any time I work on a RC he wants to sit up there in his chair an watch an help…. Yeah these are some AWESOME parts can’t wait to do the typhon up an I will be getting a 2wd ARRMA vortek to do a EPIC conversion build 4x4 4s VORTEKS gonna rip lol
Cool Mike. I guess your kid has an eye for high quality parts lol. He's super cute!
Thanks man I try to keep the family out of the TH-cam videos but he is just really starting to enjoy hanging out an working on them with me lol
I have Kraton 4s also and will get these upgrades as well. What ESC would you recommend for Team Corrally Skeeter 2150kv motor? Saw someone installed the same motor and paired it 160a ESC. I don’t really bash hard but would definitely do these upgrades for my Kraton. Thank you much.
i dont run TC so dont know much about them i still run a spekrum 130amp in my 4s kratom and have a hobbywing max10 combo coming for this
Well, I have ordered just about everything that you have displayed for my Kraton.
Now I am ordering the m2c hubs.
Curious, what ever happened to the octave bumper parts? I saw you had failures, but I read he was coming out with steel drive hubs, as the aluminum ones bent.
Thank you😊
@@frederickgrassie3383 so as of now I still run the inner ones on the diff side on both my outcast and kraton I recently talked to him and he showed me some pictures of the new ones and said he will send them out, but I've not seen them yet
@@RC4us I contacted him, he has the steel wheel axle, and aluminum diff hubs instock.
I can't figure out his money but I think complete set is $120.00 delivered by DHL.
@@frederickgrassie3383 maybe close but like I said I been waiting for awhile
Any more good upgrade s for kraton 4s
@@owen8538 yeah I go thru a bunch in other videos but the hinge pins and brace is most important I run vitavon hubs in 2 of mine I really like them
Hi Mike, I wanted to know if you could give me the correct part numbers for the vitavon front and rear hubs.
I looked at their web page, and just want to double check the numbers with yours.
I've ordered on line before from China , and trying to exchange items are not pleasant, if necessary.
Or is there an alternative parts in the USA?
Thank you very much.
Love your videos.
@@frederickgrassie3383 so theirs not many parts on vitavon website for the 4s line and they only list them as KRATON 4s but what I see as part # on his website is blx003, blx4s02, blx4s01 that's all 3 have fun buddy and thanks for always watching
Nice rig brother!👊
Thanks it’s been a long year of upgrading
How does it handle now? I bet it’s more stable in corners now.
Well to be honest I’ve not got to run it went yesterday an only ended up getting to run the sledge an today has been a complete wash out it’s rained literally all day…. But like you them hex’s should really help the handling
Does bumper fit ok with 6s pins
@@owen8538 this car is the 1st one I ever done it 2 almost 2 years ago b4 I ever shared that mod
@@owen8538 but it absolutely has 6s pin and m2c retainers lol
Please can you tell me the dimetions spesifications of the steel spaces youve made for it.
Well they actually come with the m2c chassis brace that’s what I’m using they are beveled on the one in to fit where the screw head was…. An OKTAY’s bumpers come with them as well I think
@RC4us I love your old brace also very unique, where could I get one? Or do they not make those no more?
@@nazmulhutha8657 they do make them they’re a little harder to get here in the USA am not as cheap as the m2c but my old brace was OKTAYs bumper an more easy find on facebook
@RC4us thank 😊 you soo much biddy your a great help, I'll keep an eye out for more of your vids, happy bashing 👍
Mike, I have to agree with you that the M2C Hex Extensions make a great impression! I'm curious to see what your experiences with them are, if the "wider" track causes a noticeable change in the driving behaviour!
I have another question about the !front! VITAVON steering levers, these consist of two parts, whereby on the Vitavon side the
"VITAVON CNC alu C Hub For BLX 4S : KRATON / OUTCAST" is described as "Only for V1, NOT for V2.
How did you combine the C Hub & Steering Block/knuckles? Did it work plug and play contrary to Vitavon's description or did you have to make past adjustments?
I would be very interested in this, because I would also like to order them for the front and rear, but I am unsure about the description, so I look forward to your feedback!
Do you plan to adjust the oil of the dampers with the latest changes, will it stay at 70/80WT or what did you use last?
Best regards !
So when it comes to the hubs their isnt a difference in the hubs the v2 carries over from the v1 like if you look up hot racing they’re the same as always b4 idk why vitavon even brings up v1 or v2 I think it’s only to tag on web browser look up but idk…. Just my guess
With being said it went together just like stock
@@RC4us Perfect, thank you very much, then I will place my order later!
As for the M2C engine mount and the BashBar, I've already installed them and am absolutely delighted with the fit and (workmanship) quality!
It's a pity that no pictures can be published here on TH-cam, that would often be very helpful!
What I can also recommend to you as a sensible tuning are the HotRacing pivot balls (set), which are much more durable than the original ones made of plastic and also better for the steering!
@@MrYoEddy yes those are a great option for sure but the reason I don’t use them is because then you wear out the actual rod end an not just the pivot ball… the pivot balls are cheaper then the rod ends
Hi i have the kraton 4s v1 and wondering if i can make it wider
You can but not like this the v2 an newer use different driveshaft the best way would be to convert it to the v2 drivetrain an then use these hex adapters
How about the rear A arms mine break every time
Did you do the suspension pin mod??
Other than that you just need to land flatter and don't cartwheel it.... in almost 2 years I've broken 1 arm and it was the rear on my b2 KRATON 4s
@@RC4us haven’t heard of the suspension pin mod no Iam about to look into that
@@JackstandDan Dominate Any Terrain Upgrading Suspension for ARRMA OUTCAST 4s v2.5 with @m2cracing168 @ARRMARC
th-cam.com/video/fsHUmty4I-Y/w-d-xo.html
@@JackstandDan for all the 4s and even the 3s cars
@@RC4us thanks !!
M2C Racing is a lot better than Hot Racing. I had to say it. Rant over. 😂
I have the proof I ran the hot racing for awhile almost a full year an with the m2c one it’s fits better an really locks everything together like it should that spine brace once attached to chassis an the motor plate it’s solid
Yep I'll go ahead and take everything you swapped out if I may please? 😂😅😂😁
@@sethnicholls2956 my son already took most of it lol