KS Dropzone, Dropzone Remote, Supernatural and Supernatural Remote Gen General Maintenance
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- How to perform routine general maintenance on KS Dropzone, Dropzone Remote, Supernatural Generation 1 and Supernatural Remote Generation 1 dropper seatposts
Easily one of the best how to videos I've ever seen. Very well done, leaving out no details.
I wish every manufacturer would provide videos like that. Super informative! I'm defiantly getting a KS dropper post :)
Why is it such a secret on how to pressurize shock after pressure reversal happens or full rebuild and oil flush? There are a couple homemade ball inflation needle fabs, I can't believe that is what KZ uses to pressurize these shocks. Why aren't they available to the public, People will disregard brand altogether rather than take it so a dealer if they can't work on it themselves. Very disheartening on such a smooth working shock :-(
Awesome video! Unfortunately doesn't show how to fix the sag...
Yep that's what I'm looking for
Thanks for the Video, KS! Helped in a lot in resurrecting an old Supernatural Remote for a friend! :-)
THE MOST IMPORTANT THING IS MISSING!!!! There's no hint on how to fix the sag problem. How can I refill the air pressure?!?
Go with it to service, i mean good service with forks and dampers
There are replacement cartridges for like 74 bucks. And from the looks of this video not to hard to change out
Great video. Definitely buying my gear from manufactures that design their products to be repairable and maintainable. Rather than the many products that have built in inherent flaws that are designed to break some time after the guarantee has expired and/or are designed (e.g - glued not screws) so they have difficult to replace parts (e.g - mobile phones).
Wow! Super thorough and easy to follow.
I had this KS Dropzone..one thing i realized i can't adjust the air pressure ( with shock pump ) or even refill or flush the oil inside the seatpost tube...can you describe why ?
Good, you found the reason for but this shit to the trash and buy a new one.
Guy who knows his stuff.
did he recharge the air pressure cause that's one of the main things.
Kiwifix is that needed on the i950r? I have heard about it in some posts online and I also read that 20 ml suspension oil needs to be added when reassembling. I have one I’m about to rebuild and I’m not sure about the air pressure and the oil.
Is it possible to get a replacement cartridge for one of these?
I have a LEV. It has 0 offset.
Can I fit a dropzone head (which has offset) to my LEV ?
What video would be best for KS E20 maintenance?
Mine was missing the rubber stopper at the end
Hmm. Gotta wonder why they made a "how to repair it" video?!
Pretty sure it says general maintenance not repair
Hi. What is the minimum insertion length for the 385mm post?
Is this the same as the i950r? There is an online manual some guy made that says you also have to remove the red cap that is under the 11mm nut. Is that true, is it unnecessary?
hello. What's the name of the tool you are using at 2'29 for take off the seal color ? thanks
Strap Wrench www.lowes.com/pd/Kobalt-2-Piece-Household-Tool-Set/50029434
Useless. No oil refill, no air pressure check.
Is there a place you can pump it up with shockpump? mine has sagged all the way down.
@@bazza156 if you're talking about dropzone - as I recall there is a tiny hole beneath the bottom cap for a pump for a soccer-ball valve (idk how it's called in English). But it will be easier to buy a proper dropper, and dispose this garbage.
My guide bushings are in 2 parts each (Lower are copper, upper are plastic) Plastic ones are damaged, can't find replacements..can I just swap them for these?: www.amazon.com/Shock-Lower-Guide-Bushing-Dropper/dp/B011LXFK7C
Бесполезное видео. Как обслуживать масляный картридж, как накачивать воздушную камеру?