How To Pull Cab On 6.4 Powerstroke
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- This video shows how easy it is to pull the cab on a 6.4 powerstroke, provided you have some sort of lift or picker to actually lift it! This should work for all 6.4 powerstrokes from 2008-2010.
Head removal video: • HOW TO REPLACE HEAD GA...
Head install video: • HOW TO REPLACE HEAD GA...
Cab Reinstall Video: • HOW TO REINSTALL CAB 6...
SUPPORT THE CHANNEL SHOP MERCH HERE darkirondiesel...
please like and subscribe!
Instagram @darkirondiesel
MY GEAR
GoPro: amzn.to/3mGCh7t
Tripod: amzn.to/3iPtcHk
Camera: amzn.to/3cf8lum
Mic: amzn.to/33PqcnQ
Drone: amzn.to/2ZWfj2v
Gimbal: amzn.to/3hP8Mg0
MY TOOLS
1/2" torque wrench: amzn.to/2FD3He4
3/8" torque wrench: amzn.to/2RNi3KY
1/2" impact: amzn.to/32OVUSQ
3/8" impact: amzn.to/32PrUqi
Drill and Driver: amzn.to/3kMgv0D - ยานยนต์และพาหนะ
If you'd like to support the channel shop merch here! darkirondiesel.com
As someone who does this for a living I was curious to see the video. It's a great video. I don't really have anything to add. If anyone has electrical trouble after putting it back together, those three connectors on the driver side are a likely culprit, unplug and replug them... also if you miss a cable going back on a battery terminal. Those are the big two things to check on electrical issues afterwards. Those bushing bolts can be the devil. I've had to burn a couple out.
The power cable on the driver side battery got me once, couldn’t figure out why nothing happened when I turned the key
@@darkirondiesel I forgot one on the passenger side my very first time and it went in to anti-theft mode. We have The Ford IDS system though. Our fleet had about 20 of these 6.4s now we're down to about 4. Not gonna lie, ready to see them go.
Would like to start off by thanking you for the video! This made this job so much easier in pulling the cab. I got a 2010 F250 6.4L that the bed plate is leaking on. So had to learn how to pull the cab. Again, I thank you very much for the detailed video. It saved me countless hours of messing around.
I don't believe 134a is particularly harmful to the atmosphere, at least relatively. The main reason venting is illegal is due to the wording of the regulations. They banned venting the bad ones and "any replacements" for the bad ones, regardless of the hazards or lack thereof. Not saying to vent it, just an FYI.
I thank you for heads up about this coolant splash. Here is my solution...using wide flat sqrudriver gently separate those tubes until coolant starts to dripping. Then pull I’d down gently to increase a gap. Thank for your warning not one drop got on the ground.
I use the screw driver trick too! Glad it helped you
Well done. One of the best I've seen. I have to pull a cab with a crane and it's my first cab pull, so thanks for the video.
Just make sure you spread the weight out on the slings as much as you can or it can dent the door, the wider the slings the better
@Dark Iron Diesel
Stop saying "rad cap"! You sound like a Gen Z person. It's a Radiator Cap.
Soaked in coolant and missed the bucket glad I'm not the only one who does that every time lmao. You must be gifted with a very special type of patience. I'd be loosing my mind at the cab mounts not cooperating I have to replace my cab mounts on my 05 chevy 2500 and they look about 10 times nastier than the ones on this truck do lol.
I freak out a lot off camera lol
Good shit man I'm a mechanic and hate working on diesels cuz its intimidating ran across your video and made me more confident
Great video! Once we build our shop I just wanna take my cab off and do all kinds of stuff under the hood, great in-depth video on how to do it! Probably my favorite video
Thanks buddy! Ya it’s really not that hard especially if you have a 2 post hoist. Or a gantry works good too.
I need the job on my truck actually and I don't have tools of any ,so I need someone to do it for me you know.
We have different definitions of “easy”
Yea I think we do I’m just trying to do turbos 😭
Great video! You covered everything quickly. Good filming and good job explaining it. Thanks for making it. Helped me remove my 2008 F550.
Dam and it's just lifting the cab.
Very good! Love the transcript too! If you had to write this up step-by-step step I don’t think we’d see you for a long time.
Thanks for making this video! I need to have some work done on my 2008 and this will help me be more knowledgeable when I take it into the shop.
Love the details and step by step process. Thanks should make my job a whole lot easier.
Awesome job with this video, and creative way to lift, Thanks
If you dont have a/c machine you can use a bucket full of water and put the hose inside so the freeon stays in the water
About half way through this video , you earned you're way to more money than you charged ! But you have good info about other stuff !!!
How the F do you remember what to reconnect???? Much respect after watching this
It becomes a systemic thing when you work on these trucks kind of regularly.... You think in terms of different systems and categories and those smaller groups help to break down the whole job so it's not so overwhelming... Same deal with troubleshooting, systems and subsystems work as categorization and then the smaller groups avoid the clutter.... People who hear about this way to work on these criticize it, but in reality a guy that is versed in cab pulls can do many jobs on these trucks faster than the other brands that don't encourage cab pulls for general repairs.... The super duty, has continued to improve the engineering with cab pulls intended as part of repair.,.. right or wrong it was how it was designed to be repaired
@@UpstateWoodchuck I see both sides of the deal. N one hand it’s a chore to do extra work, but on the other hand, there isn’t a lot to it per say, and could from the looks of it l do an out frame in the same time as an in frame.
Take pictures lots of pictures and maybe a few short videos with some narrative. Good luck. It really isn't that hard. The hard part is setting up and preparin. So just get everything you want done and ordered so it's up. Off and on ready to go no weighting for parts etc.. Then it's crack that first nut or bolt.
Excellent informative video! From my experience with the cab mount bolts, I realized that if you heat the bolts first, it loosens the factory lock tite and they come out a little easier without breaking the nut lose on the other side. Great video! 👍
Anybody have the cab mounts all rotted out themselves?
Nice tutorial! It is the wiring, I am most concerned with when lifting the cab-off and not missing anything.You have to think in reverse of pulling and engine. I do have to say, I have done the rad 3 times (6.4 coolant rad leaks) and have only stayed dry once.
Oh I have to use my 40 ton excavator to lift with; I have nothing else strong enough. That real make me nervous, it is not a very delicate machine.
A back road Macgyver ,A great big thanks .What a great video..Thanks...Thanks...Thanks.
now I see why they charge me so much to do the head gasket job
plus they always break something charge me more The two garages I used both of them I feel screwed me over. thank Your video I will try it myself next time
I watched this video on the first 6.4 cab I pulled and then used it again on the second just now! Super informative video. Are you in Warman SK?
Experience. Trabajo. Amigo. Nice video
Awesome video. Thank you
High pressure turbo went out and bedplate leak 🙃 waiting for my brother to get his pull barn built so we can attempt a fix, unless I decide to just pay the dealer lol
Freaking rockstar hardcore foo
Awesome video man!
Do I need to remove cab to do driver side only lifters?
I got the 2008 f250 64 powerstroke I need exhaust manifold bolt snapped how much you charge and where do you live much appreciated thank you by the way I did like and subscribe
great videos
What’s the most effective way to get her started after draining fuel and doing heads it’s a pita
I have a 08' 350 crew short bed dually with the v10.. I need to get the passenger side valve cover off and the book says to unblolt the engine mounts on the passenger side and loosen the engine mounts on the driver side, have to disconnect exhaust at the cats... The v10 is tighter than the 5.4 but more room than that 6.4 for sure.. Seems like, if I unbolted the cab on the passenger side and jacked up a couple inches and pulled it over about an inch.. I wouldn't really need to disconnect anything and would get enough to squeeze that valve cover off?? Do you have thoughts on that.. Do you think it would damage anything? Most everting connecting has a couple inches or more of slack or flex.. Thanks for sharing..
Great video!
What lines do you have to remove the cab to work on because I have a f450 and I cant find the leak but every time I park and come out after the night a oily spot on the passenger side of the truck man I'm loss can any one help
Is this cab removal pretty much the same for a 2008? Thank you
Yup 2008-2010 are the same
@@darkirondiesel... lol hence the title above. Can I read much, my bad! Just want to say this has helped a lot. First time I've done this and its seems to be going well.
I use all the machines in the background
Engineers of these trucks are on drugs.....pulling the cab for everything that needs done to these motors.
Hey buddy , where shop is?
Need the change your oil in your F-350? Pull the cab 😂
Hi y’all . I have a question . Does any one know how heavy the cab of a f350 is ? I’m using a 1 tone granty crane.
Hey man, do you have any video’s on cleaning the EGR valve. I’d like to delete but I can’t afford it.
On a 6.4? Or what truck?
Dark Iron Diesel I have a ram 2013 6.7 Cummins.
Did you use a 2x12 board under the straps in the windows??
A 2x4 just so the weight is a little more spread out so it doesn’t bend the door frames. A really wide sling would work good too or better yet use a 2 post lift like you’re actually supposed to lol
@@darkirondiesel okay well I'm trying to lift off a four door with my master craft forklift 🤔
Funny I bought this truck at auction
How long does it take?
An hour ? 5 hours?
Takes me about 3 hours now that I’ve done it multiple times
@@darkirondiesel i friend of mine is being charged 6k. Labor for motor swap. Thanks for responding!
$6000 just for the labor or including the engine?
@@darkirondiesel i told him " you can buy a lift and pay yourself 3k" lol.
Poor guy. He is in pensacola fl.
I think they told him 60 hrs at 100 per hr ( or something like that.)
Easy? Yeah if you own a crane 😂
I know it sounds like my boss it's easy Stevie and it's an easy hours my ass easy hours I want to make 30k a year not a 130k then I wouldn't be bitching or complaining
That’s a ridiculous amount of work to do simple repairs on fords. They should just go ahead and build cabovers at this point.
It’s actually not bad. A couple hours and you can pull the cab which gives you access to pretty much everything
@@darkirondiesel
The same things you’re doing we always opened the hood to do. You literally have to drain every fluid in the truck now. If that’s what you do for a living then it’s very lucrative for you but us diy guys don’t want to spend the whole day breaking the entire truck down. Which is why my next door neighbor has had his ford sitting behind his house for sale the past 3 years.
They could also design it so the hood opens forward with the fenders like my big rigs.
Thank you. I know thats a lot of extra effort to film. I know you've help me and a lot of others I'm sure.
I’m swapping f350 cab, damaged in roll over, with a salvaged f250 cab. Thank you for your video, it was encouraging. Especially “it’s easier than you think “ title. Ha-ha...
Haha you got this!
Disconnect rad hose on the passenger side instead, it works just as well lifting and avoids the mess, also on the auto shift linkage the part you took off is actually the adjuster and you can just pry that unit off rather than disassembling... Ebrake cable disconnect I used to pry the two vice grips like you did until a friend showed me how to stick a block in there and use an air chisel to vibrate it out....may have a couple other suggestions but can't remember them now.... Fantastic content!!!!
Thanks for making this detailed series. Family friend of ours had an EGR go bad in his and I believe something else in the bottom end. I remember him telling me about this cab deal, and I always wanted to see it done. Definitely subscribed.
Dude thats so easy to lift you have now given me courage to use my master craft forklift to lift my 4 door off and do it's 6.4 head gasket thanks a ton for the video's definitely subscribed 🤘
how much does the cab weigh. who are you picking points in the front. did you damage anything going through the windows.
Thanks for the video. 30 years in trade but I never pulled a cab on of these. Today is the day, we have a bunch of these older 6.4 in our fleet so I am sure it won't be my last. Great video.
Just got a call from the dealership, they wanted a million dollars for head gasket replacement. I freaked out and got on YT and started watching your videos, and I feel a LOT better now. This looks really difficult...but I think I can pull it off with these videos.
Thank you!
After watching this I appears that used Ford diesel trucks are pretty much worthless.
Im from California and I need the same work on my f250 ,how much is about , just spenses pls
Leave it to Ford to make you have to pull the fucking cab to work on your powerjoke.
Just want to thank you for your vid. Good naritive. Well done
I’m currently doing a Cummins swap in a 2010. Debating on using our crane truck to yank the cab and set it on the flat bed after seeing this! lol. Talk about tons of room!!
Your video help me out so much never pulled a cab till today watched every step by step everything went smooth
I’m about to do it on my 6.4 do u have any tips it’s a 4 door not sure if it’s much different
Great video very detailed I’m am going to be doing my manual crew cab we will try to do as good a job as you I hope thanks
This is a good time to delete that EGR get the kit and what ever tuner you want. I went with the Minni Max but i hear that they were taken of the market. You dont need a race tune just somthing that will keep it close to stock. Unless your are stripping this engine down to build a race engine. Do not use the stock engine to race. You will do catastrophic damage to the internal parts. If your just doing a Cat, DPf,and EGR Delete. To increase longevity and MPG.this engine along with good maintanence should last a long time. Depending on Milage you may want to look at rockers and injecters now. I mean the cab is up. It is a bit of extra cost but an ounce of pervention. As they say. Nows the time. Also there is a sencer under the right side valve cover that can be problemmatic maybe just replace it. As well take the EGR coolers off and the down pipe right back to the passenger side up pipe. PS if your going to keep this truck nows the time to spend a. Little $ get the Bullitproof oil cooler with external water and oil filters. In my opinion it is a good investment and nows the time.
Would you buy a f450 2010? As long as you do a egr and dpf delete?
LOL! 5 gallon bucket fit's near perfect right under that middle rad hose (only took me 12 tries to figure that out!) Screwdriver in one hand to slowly pry it apart, the other hand on the top of the split, holding the two pieces from coming apart too fast and guiding the flow into the bucket. 1 or two streams down your arm. Great video. Looks like I'll need a crane truck to do it as well.
Hahah right on! If you find someone with a gantry with a come-along on it you can pick it up that way too
Thanks for this video I literally watched this & did step by step on an 08 f550, thanks for the video really helped me out
Great video! Really appreciate you putting the effort into this. Saved me a ton of money and I learned a great deal performing the job on my own.
Thanks my good man. Great video. I have watched this twice now. My 08. 6.4 is not showing any signs of requiring this type of work yet. However to days, the date is July 04, 2023. The odometer is 215000 km Canada ha 😊 something like 135000 miles deleted 20000 miles back. excellent maintenance records. Just completed a major trans restoration, and a complete break re & re. This is a forever truck. I will keep redoing whatever it needs. I love this truck that much. It's just a matter of who outlasts the other me or the truck 👍😂🤣😅😉😊👌
Yes just did it by following your video. Was easy, took 4-5 hours at home with hand tools. Called a picker truck to lift it off. Swapped engine and now waiting to replace cab. Need to delete egr first and replace shocks. Easy to work on with cab off. Way to go Ford.
I wouldn't suggest using an impact on the cab bolts because the impact can very well cause the nuts to break off
They could, but after pulling about 30 cabs I’ve found it best to just impact them out. I’ve never had one break, but I have had lots seize up. I find if you just zip them out with an impact it lowers the risk of having one seize up.
As a diy person wanting to work on my truck, this seems like a bit of work. One of those jobs, you may regret starting. :)
I've had better luck disconnecting the transmission and pulling the motor thru the front no need to open the a/c system. Works well if you don't have any type of lift in your shop.
Thanks bro I got the cab pulled in 3 hrs you da man!
I enjoy your contents alot man. You should video record all the work you do and show us. The way you explain things makes it fun watching.
Thanks buddy! I try to film as much as I can but it definitely makes a job take longer when I have to film the whole thing haha.
"I'm gonna vacuum this out so I don't get coronavirus from this truck..." Bahahahahhahaha I'm dead. Great video!
thank you for
explaining in a way that is easy to understand,
Nice vid, very informative. We appreciate your video
Great video! Thanks for being so thorough. Saved me a heap of trouble
Throw away engine
😂 yes
Love it! I’m replacing the short block in mine. I appreciate your time in videoing and explaining!
Do you have a video on how to start from finished to get to the valve covers on a 08 f350 6.4 diesel.
Huge help man i appreciate the detailed walk through.
I'm not a very smart man, but isn't this a step backwards in engineering.
Mine is deleted and tuned no check engine light on can I remove the egr coolers off the truck
video should be titled "Overcoming Ford's engineers"
What did you put inside the roof of the cab to relieve stress
Amo tu Design Time My Mind Thank You So Mean de vidrio
Called a shop, guy said $189/hr for 30 hours!
Thanks for the tips !!!👍👍
Great work👌🏻🙂
Are you filming this with a head mounted camera? If so, what camera? Thanks!
Good video. Didn't read all the comments but the transmission cable connection just pops off with a cat's paw. No need to disassemble the cable or mess with the adjustment
Thanks for the info!
Where are you guys located?
thanks for the video I watched a guy pull the engine without removing the cab I will remove the cab. stupid engineering. but thank you for saving me some gray hair trying to get my engine out washout pulling the cab first. should have watched your video first.. thank you
What did you do about 4wd linkage ? Or was this an electronic shift
I believe it was electric but if you have manual you would just disconnect the linkage from the transfer case
On the driver side of the radiator there is a plastic 19mm drain plug i found it by accident
Were are you located
Great job
I’m getting ready to pull mine
Thanks buddy good luck!
Can you do mine?
Oil cooler😔😏
Great video