ICE FISHING FIRST TIME OUT + FIXING ICE AUGER
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- We went out on the ice for the first time in 2023. the auger was running rough so we brought it back and went through the carb. now we have the kinks worked out and are ready for the next fishing trip. thanks for watching.
As a Southerner, this is absolutely fascinating. 😂. That a whole lake freezes over to the point you can walk out on it, drill holes in it, set up camp on it, and still somehow fish is amazing. I love anything outdoors and this is great
Zack you are a mr. fix it I learned how to do that when I was Landscaping if you had to fix the equipment yourself keep up the good work your dad and your family are proud of you your wife’s proud of you and your daughters proud of you
I wish your dad would take better care of his stuff. Lol
Happy New Year to you & family. Cheers from your North Shore neighbour on the other side of the border! 🇨🇦
Great Video!
Holy shit I can't believe you bare handed that bad boy. You weren't letting him get away 😂
The Old Saying up here in Canada. "A bad day of fishing, is better than a day at the Office!" Thanks for sharing.
I also have a minivan. A Pacifica though. I had every intention of folding the seats down and using it like a truck as much as possible BUT it's such a struggle to get the kids car seats back in I decided if I need a truck I'll just call my ol man to come over lol. I'll have a truck again in a few years. Minivan is here to stay my wife loves it and it took A LOT to convince her we needed it haha. I have always been a fan of vans for their comfort
Great job on the video. You're editing skills are coming along nicely .👌
Had jiffy's for years Zach. Run them with amsoil Sabre mix at 50-1. It will help keep the power when under load. Amazing difference.
Dude I almost fell off the couch when you almost lost that northern lol Nice Fish! 😁
I dove for that fish too! Almost knocked my monitor over. 😜 Thanks for the video Zach!
BTW, I've been drilling holes in the ice with a 6" hand auger head (with sharp blades) and an adaptor to fit into a cheap RYOBI P251 cordless drill. Last winter it cut through 23" of ice in under 10 seconds. Always starts the first time I squeeze the trigger, no problem.
Wait...
Come Back!
Awesome!
The two things I find with two strokes are old fuel and a new spark plug make a difference . When in storage drain the fuel and run them dry .
^^^^this. 100%
I have the older white jiffy auger. it's time I do this to it.
nice surprise pike
Good to see you Zach happy new year to you and your family ..From outback Western Australia..👍
Awesome fish Zach! 💖
Zack would love to see you ice camp and fish at the tent lake please. And fry your catch. Catch and cook. Phil from kasson Minnesota
Hey Zach, happy to see you're still playing guitar. Thanks for the video.
Zach im glad you made a comback in the last couple years. One thing I love about this channel is how normal it is.
Zack , Nice retrieve ! I would think your father would say the same thing. Happy New Year ! 🎉
That looks cold, 70 degrees here in Arizona. Love the video, good luck fishin !!!!
Awesome catch Zach! 👍👍👍🤩🤩🤩💯💯💯
Nice catch.keep up the great work
Great Reactions!
Pretty work Zach.
I love it Zach. I have an Eskimo I need to get running.
🏆🏆🏆🎏 awesome catch 👍
I love my Dodge Grand Caravan. It's older, but when I stow the back seats, I have more room/length than most pick-up trucks.
I'm a big fan of the van!
Way to go, Zach
P. S.
Glad you let the ol' boy go - but what a nice fish!
Thanks Dave
Zach, sharpen or replace those auger blades!!
He woulda still been trying to swim away when i threw them fillets in the pan but kudos to you Zack for putting him back, you dont have to bring something home to make it a good trip...
HAPPY NEWYEAR to you & your family>
get yourself an electric one. I have a strike master, love it! will never use a gas one again
I would love to get an ion. Especially to reverse the slush down the hole. Maybe one day. Thanks
Our ice melted over here in ny. Hopefully, it gets cold 🥶 again
What ever happened to the blue pick up you used to take ice fishing last year?
👍FROM CADILLAC MICHIGAN
Harbor freight sells the ultra sonic cleaners LOL
👌
Glad I didn’t have to pull your toboggan 😳
Use cheap hotdogs 1/2 a dog on a daredevil red and white works for me
Great video keep ‘em coming zack!
Zach, lighting needs to be more direct where you are working in the garage. Also focus was sketchy. Can’t really see. Love watching what you do!
What kind of fish were you looking to get? I am unfamiliar with ice Fishing. That looked like a great fish, but maybe hard to clean?
If it rains are those ice tents waterproof from above
Gas , electric, battery auger they all make the same noise cutting thru the ice , I’ve used a strike master for years the fish still show up where I fish .
at 19:43 see the Centaur ;-) enjoy!
How did the house and insulation do at -30 with 70mph winds?? I imagine you may have found a few drafty spots.
House did well. The new kitchen windows needed some insulation around the edges. I would like to add some insulation to the attic. It's around r-19 right now, and it would help if we brought that up to 49 or 60. But it's been good so far.
Love your repair videos. You actually get the camera focused up in tight. Wish I was closer to your area. I've got all sorts of outboard boat motors (2 Cruise 'N Carry 1½ horse, 50 horse long shaft Johnson Sea Horse, and an old 50's 40 hp Mark 55 Mercury) and other tune ups and repairs I could use your coaching with. My latest project...my 70's Bradford 8hp 3 stage 26" snowblower broke down. It must have wanted this year off, too much of a sweet running beast to let it retire though. The friction wheel's hub (aluminum), it's driveshaft and keyway and key are worn and tore completely out. Don't have much hope of finding replacement parts. Will have to do machining repair. Wish I could send a pic to your email. I'm a "never FaceBooker" but might be able to have someone send you my email.
Sounds like a lot of time and work. I think Zach may be too busy now but I probably shouldn't speak for him. I don't need the wrath of Joe! lol
@@jamessandman3708 just dug into the friction wheel on the old Bradford. Thought there was a sleeve insert that had the keyway, it could be removed. It appears to be part of the aluminum casting now that I've mucked 'er up good. Have to find a machine shop, good ol' tool and die guy. Know of any in the Mpls metro area?
@@yadabotbingo Oh no, I am way south of there. The old guys that cut their teeth on some of these old boat motors are disappearing. It is sad to see any old craft not being passed down through the generations.
for us not in the know about freshwater fish is a northern a pike?
Yes
No offence, but your Dad doesn't seem to take the time or care to do the preventative maintenance on any of his tools, toys, vehicles, etc. Good thing he has you to do all of this for him. He seems to just buy all of these things, use them, abuse them and then park them somewhere (usually OUTSIDE in the elements) for the rest of time until he may need them it again sometime. He doesn't understand (or maybe care) why these things don't work. You, on the other hand appreciate how important it is to drain the fluid(s) in machine(s) before storing them to preserve their life. Also, performing preventative maintenance to prolong the life of any of your machines (vehicles, toys, tool type machines, etc.). I was sorry to see you toss that Northern back into the lake, that would have made for an excellent meal! I miss the Co-ho salmon that were caught out in Lake Michigan (we're in Florida now). Those fish were so awesome baked with just lemon and onion. What a beautiful meal. Enjoy your fishing, camping, hunting and just recreational times up in God's Country. Happy & Healthy New Year to you & your Family! God Bless!
All that takes time and money and sometimes makes zero difference
Joe, drums to his own beat. Maintenance or not, that’s his choice.
Yeah that joe is just flat out lazy!!! Borderline couch 🥔 😂🤣 oye!!
He also has a life working making an income wtf
@@Tinger_90 , like his kid doesn't?
First...
@Mike Lettuce Joe Weber is special. He is first just like he is first to get in the shower with other men. He likes that
who would steal a old gas auger? You cant give those things away.
My wife's car was broken into once, and they stole her cds. I don't think battery augers were so popular 10 years ago. Regardless, augers are expensive and when we bought our first house we were very poor. We didn't have money to replace the auger if it was stolen.
diaprahm
Nice fish, always gets the blood pumping when you hook into a northern, Fish on