Great video, may I ask what material you use? I am a custom funko pop artist and been using miliput for years to sculpt what I need but im kinda losing faith in it
even being older video still got good Tips some i have not seen B4 TY been having trouble lately making tiny hands working on Little Nightmares characters so can imagine if you sen the Video game. Also for me depends on the type of clay being used super Sculpey very good for making tiny hands, the body templates for ur fairies also be used for other characters but i like fairy too though.🤓 also for fingernails well i used smaller straws and cut it to an angle you know like a hypodermic needle i will try using them Needles for Folks use for Epoxy resin but i will need to sand it to an angle can buy different size types if this helps for finger nails works great for me ok Thank you aprylian
I usually just feel mad lol. I can never get it just right. Sometimes I need to just quit while I'm ahead, but the ridiculously annoying perfectionist in me just keeps "perfecting" until its destroyed...I'm a perfectionist who has never perfected anything😂
Thank you for the great tips! I'm working through Maureen Carlson's "How to Make Clay Characters" and the hands are making me crazy. (I've found creative ways to hide them all so far, lol.) I'm pretty sure my next doll will have nicer hands due to your help. :-)
when using polymer clay which is hardened in a stove (130°C) it easily happens that the fingers change their position while in the stove. Is it then better to first make the fingers with some thin metal wire and then put clay over it so there is more stability to keep the fingers in position?
LEDSI LEÓN - DEXTRE DÍAZ Cernit, Prosculpt, and Premo Here is the video:th-cam.com/video/jir3czAddYM/w-d-xo.html&lc=z13uvrkjpuvhjdswo04cgdvglsvtuzzrfgk
So lovely :D got alot out of it, thank you! ^^ One question though, did you bake the body before adding the hands, then put it in the oven again in it's entirety?
+MarvellousMarvel Fjeah Yea the whites can be tricky. I use a mixture of clays; Prosculpt, Premo and Cernit. Here is a video: th-cam.com/video/jir3czAddYM/w-d-xo.html
I'm here to make tiny hands for my aarakocra D&D figurine. But it's even smaller than this...It's like 2 inches tall. I can make wings with all the feathers, beaks, talons...just not hands.
@@aprylian Yeah...but it's a bit easier thanks to your video! I've made 4 miniscule hands already, and none of them are good enough, but they're much better than if I had tried on my own (and they're getting better each time I try).
I am 8 years late but this was a great find. Subbed and looking forward to watching more of your videos. Thank you for sharing your skills
I've been trying for three days straight to make decent hands, this is the only tutorial that has helped. Finally got one!
That is great! Keep on going.
Wow!! Cutting out a wedge = mind blown.
I get the feeling that what is looking simple here, is actually pretty clever. Experts make hard look easy.
You just have to try and also practice. :)
wonderful, I hope I can get as good as you at sculpting! It's amazing to see it come to life, as you do a bit more on each Ooak doll.
+Veronica Evans Thank you! You can see my tutorials at www.MakingFairies.com
Wow, you are incredible!
This is awesome. Thanks for the tutorial 😍
You are very welcome
So beautiful! Thanks a lot for sharing your technique!
IriciaZelda Oh you are very welcome. Thanks for the nice comment!.☺
I really admire your talent👏🏻👏🏻👌👍😘
+Elen avestisyan --->> Hello Elen! I cannot reply directly to your comments, so I am posting this hello. Thank you for all your comments on my videos!
This is so wonderful thank you. I feel like there is so little informational out there about sculpting. So thank you
My wonderful beau Your welcome! Hope you get to see my other videos for more help.
Which clay is that? It look like hard and stable
Absolutely beautiful!!!
Great video, may I ask what material you use? I am a custom funko pop artist and been using miliput for years to sculpt what I need but im kinda losing faith in it
I use Prosculpt polymer clay. At the moment I am waiting for may clay supply from the manufacturer.
even being older video still got good Tips some i have not seen B4 TY been having trouble lately making tiny hands working on Little Nightmares characters so can imagine if you sen the Video game. Also for me depends on the type of clay being used super Sculpey very good for making tiny hands, the body templates for ur fairies also be used for other characters but i like fairy too though.🤓 also for fingernails well i used smaller straws and cut it to an angle you know like a hypodermic needle i will try using them Needles for Folks use for Epoxy resin but i will need to sand it to an angle can buy different size types if this helps for finger nails works great for me ok Thank you aprylian
I feel like a mad scientist when I make things like this.....
+Galaxy Wolf
Yes, I know what you mean. I have heads and arms and legs everywhere. lol
I read the first sentence and was like O.O until I remembered your video :3
I usually just feel mad lol. I can never get it just right. Sometimes I need to just quit while I'm ahead, but the ridiculously annoying perfectionist in me just keeps "perfecting" until its destroyed...I'm a perfectionist who has never perfected anything😂
Maybe you are not using the right clay or maybe you just need more practice. www.MakingFairies.com
This really helped me out so much a great close up of your work, Thank you!!
So glad it helped! Hope you get to visit www.MakingFairies.com My new sculptBox is out. :)
@@aprylian I just subscribed to your news letter and looking forward to learning so much more, I need to practice working on my hands.
sometimes I get happy when I make a hand perfectly
Then I cry when it falls off the arm.
Oh no! It should not fall off the arm. You need one of my tutorials. lol
Do you use armatures?
Ziestosti 😭
Thank you for this great video, it helped me soooo much :)
por dioss amiga eres muy buena en estos trabajos te admirooo😃😃😃
Gracias!
SO HELPFUL thank you!!!
ℒuxe Your welcome and thank you for watching. Hope you get to see my other tutorials. ☺
what polymer clay do you use?tenk you
You're so coool! It's wonderful.
Thank you! Hope you get to visit www.MakingFairies.com
I use paper clay, works fine xxx
Great tutorial thanks
what kind of clay are you using?
Fabulous tutorials. Thank you.
Thank you! Hope you can watch my other videos. :)
Thanks this is very helpful
Glad it's helpful. :)
ohh porfin ya vi como se hacen hehe no me salian bn antes
Ye aap kis se. Hand bna rahe h
what clay is this
Thank you for the great tips! I'm working through Maureen Carlson's "How to Make Clay Characters" and the hands are making me crazy. (I've found creative ways to hide them all so far, lol.) I'm pretty sure my next doll will have nicer hands due to your help. :-)
Oh I am glad it will help you. Hope you get to visit www.MakingFairies.com for tutorials and supplies. :)
What clay is used? Hope you see this.
I use Prosculpt polymer clay.
when using polymer clay which is hardened in a stove (130°C) it easily happens that the fingers change their position while in the stove. Is it then better to first make the fingers with some thin metal wire and then put clay over it so there is more stability to keep the fingers in position?
I don't have that problem but yes you can do that or you can also use a heat gun for a minute on the hands to harden them a bit before you bake them.
Very good👍
I love you you're awesome and talented. Thank you so much for the tutorial
What kind of clay should we use?it is so awesome that I want to make myself either >
I have most of my supplies and tutorials here www.MakingFairies.com
Thanks a lot.
Thank you ⭐️⭐️⭐️⭐️⭐️
JASMINE HELME Hi Jasmine! You are very welcome. ☺
It is real hand we can put at Barbie 👍
Hello, I love your work, I wanted to ask a question, what kind of "mass" to sculpt use
LEDSI LEÓN - DEXTRE DÍAZ Cernit, Prosculpt, and Premo Here is the video:th-cam.com/video/jir3czAddYM/w-d-xo.html&lc=z13uvrkjpuvhjdswo04cgdvglsvtuzzrfgk
My fairy turnd out grate
Elka Rut Oh Good! I'm glad.
Thankyou😊
Incredibly fiddly but fantastic results
Yes tiny hands can be fiddly.
Wow gracias
complimenti lavori stupendi potrei sapere che tipo di pasta usi per modellare le tue creazioni? grazie mille
+Anita Bruno Here it shows the clays I like to use. th-cam.com/video/jir3czAddYM/w-d-xo.html
So lovely :D got alot out of it, thank you! ^^
One question though, did you bake the body before adding the hands, then put it in the oven again in it's entirety?
+MarvellousMarvel Fjeah
Yes most polymer clays can be baked a few times.
+aprylian Oh i did not know that , thank you ^^
I did overbake a few pieces, and got a little scared of putting it in the oven too many times.
+MarvellousMarvel Fjeah
What clay did you use?
+aprylian Fimo (from staudtler) polymer clay :/ Only the white clay burned though, giving it a brownish look...
+MarvellousMarvel Fjeah
Yea the whites can be tricky. I use a mixture of clays; Prosculpt, Premo and Cernit. Here is a video: th-cam.com/video/jir3czAddYM/w-d-xo.html
Pair banana sikhao doll ka
What is the material you used?
I used polymer clay. Visit my site and you will see all the materials: www.Makingfairies.com
What kind the clay do you used?
Juan Gómez Blandón I use polymer clays. Here is a video showing exactly which ones Mixing Custom Clay with a Pasta Machine for Polymer Clay Sculpting
please can you tell me what material you used to make that fairy?
I use polymer clay. Take a look at my fairy website www.MakingFairies.com
A- Chan
Clay can be found here: www.makingfairies.com/collections/clays
thank you
A- Chan
Thank you !!!
adorei o trabalho de vocês mas esta em inglês
+Ivone Carlos
Thank you. Yes in English.
What is the material made of the doll
She is made of polymer clay.
I'm here to make tiny hands for my aarakocra D&D figurine. But it's even smaller than this...It's like 2 inches tall. I can make wings with all the feathers, beaks, talons...just not hands.
Tiny hands are a challenge. :)
@@aprylian Yeah...but it's a bit easier thanks to your video! I've made 4 miniscule hands already, and none of them are good enough, but they're much better than if I had tried on my own (and they're getting better each time I try).
Oh good. Keep practicing. Magnifiers might help too. lol
awesome thank u for sharing!
You are welcome. Hope you get to visit www.MakingFairies.com
Thanks a lot, helped me a lot!
Are you using clay for all your ...
Yes all my artdolls are in clay.
excellent thanks!!
My pleasure! :)
good tips！thanks
My pleasure. Hope you can visit www.MakingFairies.com! :)
wooooow!!!
Thank you!
I found the answer in the other commente.
These look like the tomatosita hands
so perfect
Thank you so much! Hope you can visit www.MakingFairies.com
can the fairy move her body parts
+Keira Sacco Not my fairy but my BJD moves.
👍👍👍👏👏👏🎄🎄🎄☃️☃️☃️☃️
me puedes man dar uno
Jorge Cardenas Vendo tutoriales aqui www.MakingFairies.com
igen imadom
hi
well I say that you are not teaching everything you are just teaching the cuts we know how to do that