How to Remove Iron on Patches？Step by Step- O mistake.

How to Remove Iron on Patches？
First, let’s prepare the materials:
The clothing with iron on patch
An iron
Adhesive remover
Hot water
A Knife
A brush
Once you have these materials ready, let’s get started.
Step 1: Lay out the clothing with the patch.
Step 2: Preheat the iron to 160 degrees Celsius.
Step 3: Iron the patch. Remember, it’s best to iron the back of the patch-the side with the adhesive. Iron for about 20 seconds, then remove the iron and check if the adhesive on the back of the patch has softened. If not, go ahead iron for another 10 seconds. If it has softened, gently peel off the patch. Remember: start from the edge and be gentle. Don’t pull too hard, to avoid damaging your clothing.
Step 4: After peeling off the patch, it’s time to remove the adhesive. This process requires a bit more patience.
Step 5: First, spray adhesive remover on the adhesive area. Let it sit for 1 minute, then gently scrape it off with a knife. Repeat this several times. Remember: be gentle.
Step 6: Once most of the adhesive has been removed, soak the clothing in hot water (50-60 degrees Celsius) and add Laundry detergent to clean the stains. Now, you can use a brush to clean the area where the adhesive was.
www.pinsfun.com/how-to-remove-iron-on-patches

[@KaderDiop40]

Thank you Worked in 20 seconds with just ironing the back of the patch

[@ewopeep]

thank you i.ve been so frustrated with my patch on my hockey jersey from when my team made playoffs and i wanted to take it off without ruining the jerseys so thanks this was helpful 😄

[@calholli]

AI is flooding the land with the infinite dribbIe

[@ileryon4019]

6k views... And it was not a robot that made the video..

[@Minionnerd]

Skibidi gyatt

[@calholli]

@@ileryon4019 That's even worse

[@DontFuckWitDreDay]

Thanks, excellent information. Very clear instructions

[@pinsfun6862]

you are welcome