I actually just got a sony 43 inch X85K to use as a monitor for my computer engineering position as well as im going to be ordering the 32 inch version of the G7 to go on top with the ability to be pulled down to play Apex and COD any pointers on the mounting? Kinda need some help. (Going to be mounting to a desk)
@@williusridino3984 he's just complimenting a beautiful baby. Have you never heard people saying that about other peoples babies? It's not sus.. you're just too much of a child to understand.
You gotta appriciate the time he puts into these videos. His dedication is unreal with rhe consistency of uploads. Congrats man, you've really done it! Congrats on the new setup!
Lets goo! I love watching you put setups together and it’s especially entertaining when it’s putting “YOUR” Setup! I’m very happy for you and hope you have fun with your setup.
As somone who has almost the same mind as you, reguarding how any little thing needs to be what you want, im so proud of you for being so positive on your dream setup. Congrats on everything and on your acomplishment. You got a really beautiful home and family, and a hell of a setup with all the time it took to go into. I know there were ups and downs on the way but you did it! Congrats Ed!
Love that you put the white vinyl back on the monitors. The measurement and alignment requirements must have been nuts. I recently painted various hardware and mounts based on what I saw on your channel. I went ahead and spray painted my mounts and other hardware. I recently submitted to setup wars, and did a setup tour on my channel. Thanks for the inspiration!🙂
you should flip the top centre monitor and have the thicker bezel at the bottom because your lower monitor overlaps the bezel anyway. And the thicker bezel at the bottom will help hide that gap, and it will put the thinner bezel at the top to more closely match the side monitor bezels.
Hi Edgar, if you flip the top ultrawide by 180 degrees so that the bezel is at the bottom, you'll have a perfectly clean & thin bezel line connecting the top of all 3 monitors, while the bottom bezel will be mostly hidden by the bottom monitor. It would look even cleaner, try it out my guy! 👍
If you’re read this…Let this be the week when you finally realize how amazing you are and fall in love with every inch of yourself. You’re literally perfect ❤️🔥
This series taught me a lot and I can’t wait to upgrade my set up in the future and take some inspiration from this. This set up came out to be amazing, good job!
The gap and the monitor issue isn't because it's not flat. You didn't consider adjusting that curve you wanted. To have no gap, you need the same monitor on the top and bottom. Then you can angle it and there won't be a gap. Simply physics. The bottom monitor has the same curve, but tid smaller so it's curving sooner than the top monitor is, creating the gap.
Wow, absolutely wowed by your dedication and patience to build this beast of a setup! Gotta say am a bit jealous, but so happy to see the setup finally come to life all together😍 Absolutely stunningg😍
Congrats dude ! I really liked the moment when you tested if the Pc would leak or work properly and the joy when everything 's fine. Jump joy really :D It's really amazing to live the dream as you do
I love how your wife helps you! That would be the kind of girl I would want. A helpful kind and loving wife. I love your relationship and how she respects your love for gaming and TH-cam.❤️✊🏽
I dont know if you have already thought of this. But you could lay down the backboard flat. That way it should be way easier to align the monitors. At least without having to balance them on wood blocks, books and what not..
What a journey! I'm going to miss this series, but as we all know, desk setups are never truly "finished." I know I can't stop tweaking my own. As a side note, I'd be very interested to know how the thermals are on BRv4 now that it's mounted so close to the wall. It looks great with the flush mount, but I worry that there isn't enough space behind the radiators for exhaust.
Those monitors being uneven would have bothered the shit outta me as well!! So, you're NOT crazy! When you put all of that work into something, you want it to be perfect!! Especially in a setup that you're going to be spending a lot of time in. Awesome work!
ED, you can put a flat monitor at the bottom and turn it up side down so that the non-screen bar will go below the curved one and no part of that flat monitor will be covered by that curved one
I honestly cannot believe you actually did it. And practically by yourself. You sir, are a setup god. The amount of dedication you’ve put into this project is commendable. I think the result of this work is more than any trophy is worth. Amazing job Ed, can’t wait for updates.
When he was explaining the weight on the table I was 100% certain that the desk was gonna fall off the wall, I was both relieved and disappointed at the same time when nothing happened
Thank YOU for taking us along with the process! Looks very clean and I like the aesthetic you went with. Purple is my favorite color and it matches just too good with black and/or white.
Man I can’t believe you are still keeping my artwork as wallpaper. I’ve made the McLaren neon years ago and I saw many people using it as wallpaper. So glad you enjoyed that much. Actually you are inspiring me on going back to make my own artworks since now I work in movies and can’t make my stuff. Cheers and nice job with the channel!
now since you got this litte overlap of the high refresh rate monitor to the ultra wide, you could basicallly flip the ultrawide so that you don't loose any screen real estate. since the overlap would only cover the bazzel.
Oh my god bro just looking at this makes me shake, it looks absolutely insane and beautiful. Good work on this. Maybe one day I’ll be able to make my dream setup.
ED you out so much effort into your work you never do it the easy way you do it the best way possible and it always comes out 150 percent your effort in your work is amazing even when its for other people i have respect.
Changes I would make if I were to that kind of monitor setup is I would move the top monitor up. Move the top monitor up enough to where the top corners of the side monitors aren't lined up with the top corners of the upper monitor, instead the side monitors top corners would be lined with up about half way up on the upper monitor. Or about high enough to wear the top monitor isn't uncomfortable to look up on, but the bottom monitor isn't uncomfortable to look down. I'd also get a bigger mousepad across the desk mousepad, so it gives a better more filling effect.
Man, Ed, I know the feeling. A couple millimeters off center or out of place? It drives me absolutely batty. The new setup's coming together real real nice. Looks fantastic.
I found it funny that he said "I have to keep my voice down because I don't want to wake up Shela" then continues drilling his monitor mounts into the monitor! 🤣🤣 I bet she woke up from that, I sure would!
LETS GO, I kid you not I've been refreshing my youtube home page for hours 😆 that looks slick, I know you've put so much effort into this but something is still missing, not sure what
Ur attention to detail and hardworking is just amazing brother. I just sat down after painting 3 room in my house. Watched part 3 and 4 and honestly better then watchin some show. Got to learn a lot and get some ideas for my setup soon. Thanks Edgar. 🍻
Ill be updating my setup off camera and posting updates on my IG for anyone interested in the progress: instagram.com/ed.techsource/?hl=en
Betttt!!
less gooooooooooooooooo
So you are talking about 3 millimeters and I would be happy if I had that monitor that you put aside and an ikea desk, pc with a 3060
@@devontheshoota i mean if i were to create my dream setup i would only want the best and no sacrifices
I actually just got a sony 43 inch X85K to use as a monitor for my computer engineering position as well as im going to be ordering the 32 inch version of the G7 to go on top with the ability to be pulled down to play Apex and COD any pointers on the mounting? Kinda need some help. (Going to be mounting to a desk)
This dude really did it. He got himself a amazing house, and beautiful child, and a amazing setup.
He’s made it
He made it!!! 🔥🔥🔥
He’s made it
Bro just called a 1 year old beautiful kinda sus
@@williusridino3984 he's just complimenting a beautiful baby. Have you never heard people saying that about other peoples babies? It's not sus.. you're just too much of a child to understand.
You gotta appriciate the time he puts into these videos. His dedication is unreal with rhe consistency of uploads. Congrats man, you've really done it! Congrats on the new setup!
23:43 i love the reaction, it was the exact same when i booted my first watercooled setup, its always the water flowing that sounds like its leaking
The man who taught me how to build computers, the man who made me fall in love with creating set ups. Thank you Ed for everything ❤️
same bro
ed is a G
Lets goo! I love watching you put setups together and it’s especially entertaining when it’s putting “YOUR” Setup! I’m very happy for you and hope you have fun with your setup.
loving this series so far, excited to see this episode
27:53 man, this man does not even leave a detail. If this was my setup, i would have just ignored it
Woohoo!!
Can't believe this series is finally coming to an end, it's been a long year :)
As somone who has almost the same mind as you, reguarding how any little thing needs to be what you want, im so proud of you for being so positive on your dream setup. Congrats on everything and on your acomplishment. You got a really beautiful home and family, and a hell of a setup with all the time it took to go into. I know there were ups and downs on the way but you did it! Congrats Ed!
👆👆Congratulations you won my prize 🎁.
Love that you put the white vinyl back on the monitors. The measurement and alignment requirements must have been nuts. I recently painted various hardware and mounts based on what I saw on your channel. I went ahead and spray painted my mounts and other hardware. I recently submitted to setup wars, and did a setup tour on my channel. Thanks for the inspiration!🙂
you should flip the top centre monitor and have the thicker bezel at the bottom because your lower monitor overlaps the bezel anyway. And the thicker bezel at the bottom will help hide that gap, and it will put the thinner bezel at the top to more closely match the side monitor bezels.
OMG its gorgeous.. the work, the details, the precision and that all coming together nicely.
Bravo Ed, it's a masterpiece!
@@Menaiku2 does that make me a boomer? 🤔
@@Menaiku2 we can all tell by ur pfp so no need to say that
Your videos make me feel happy inside because even if i cant achive goals like building a setup like yours its good to know someone else is able to.
Beautiful, your work is amazing, and the perfect example of what planning and hard work will do.
Hi Edgar, if you flip the top ultrawide by 180 degrees so that the bezel is at the bottom, you'll have a perfectly clean & thin bezel line connecting the top of all 3 monitors, while the bottom bezel will be mostly hidden by the bottom monitor.
It would look even cleaner, try it out my guy! 👍
If you’re read this…Let this be the week when you finally realize how amazing you are and fall in love with every inch of yourself. You’re literally perfect ❤️🔥
I haven't been this jealous in a long time.... I am already curious about the really LAST part 😍😍
This series taught me a lot and I can’t wait to upgrade my set up in the future and take some inspiration from this. This set up came out to be amazing, good job!
The gap and the monitor issue isn't because it's not flat. You didn't consider adjusting that curve you wanted. To have no gap, you need the same monitor on the top and bottom. Then you can angle it and there won't be a gap.
Simply physics. The bottom monitor has the same curve, but tid smaller so it's curving sooner than the top monitor is, creating the gap.
thanks for this amazing series ed, you're the best and no one could've done this better other than you.
Ed's reaction when the PC finally turned on is pure GEM 💕 well done my guy!!! Super happy for you.🙌🙌😁
literally best setup I've seen in ages, amazing job Ed !!!
I really enjoyed the setup and the custom made pc on the wall, enjoy bro..
love watching the process!! cant wait to see how the rest of your house goes :)
The cable management he achieved not to mention the amount of work JUST to set everything up is amazing congrats man it looks beautiful
Wow, absolutely wowed by your dedication and patience to build this beast of a setup!
Gotta say am a bit jealous, but so happy to see the setup finally come to life all together😍 Absolutely stunningg😍
Can’t wait for the ultimate desk setup tour
The video we've been waiting for. My mouth is watering right now. Love your vids Ed. Been following your setups since the days of Skylake. Thank you
Congrats dude !
I really liked the moment when you tested if the Pc would leak or work properly and the joy when everything 's fine. Jump joy really :D
It's really amazing to live the dream as you do
Congrats Ed , beautiful setup , honestly u put in more effort into your setup build than i'll ever put in my college 😂
Eventhough its not a set up I personally would make or use myself you have to respect the hardwork put into it.
This looks so insane ed well done keep going on youtube like this love ur content
I remember the first video I saw on this channel was a little over a year and since then you talked about this dream, I'm really happy for you dude
Love your content can’t believe how it’s turned out ❤️
I have OCD and seeing you go this far with every aspect of your setup is so satisfying
fix ur discord mods man they ban ppl without reasoning
ok
I been on the server once 2021. Never been banned. Unless you’re being outright inappropriate it’s ridiculously hard to be banned.
man this setup is the dream of every gamer, great respect to you
👆👆Congratulations you won my prize 🎁.
Duddeeee this is sick! I really had fun watching you all through out the setup process!
'If this doesn't work I am jumping off a bridge" - TechSource 2022
"we are off by a millimeter on the top unfortunately" lmao perfectionist. This is why we love you haha
The "(Finale)" hit me straight in my heart. bro make more of these
ed's dedication is on a whole different level and that's what i like about him
congratulations on the new setup
If you flip the top monitor right side up, you can bring the ultra wide lower and minimize the gap inbetween
17:38 he’s having the time of his life.
I love how your wife helps you! That would be the kind of girl I would want. A helpful kind and loving wife. I love your relationship and how she respects your love for gaming and TH-cam.❤️✊🏽
Amazing series, I love your dedication Ed, the passion in which you apply to this build is unmatched. I can feel that relief at 24:30 too.
I dont know if you have already thought of this. But you could lay down the backboard flat. That way it should be way easier to align the monitors. At least without having to balance them on wood blocks, books and what not..
there is absolutely NOTHING wrong with this setup, therefore it is a perfect setup, amazing job Ed!
My anxiety was in the red when Mrs. TechSource stood up on the desk. Great job mounting into the studs! Loved the video Ed!!!
What a journey! I'm going to miss this series, but as we all know, desk setups are never truly "finished." I know I can't stop tweaking my own.
As a side note, I'd be very interested to know how the thermals are on BRv4 now that it's mounted so close to the wall. It looks great with the flush mount, but I worry that there isn't enough space behind the radiators for exhaust.
👆👆Congratulations you won my prize 🎁.
Those monitors being uneven would have bothered the shit outta me as well!! So, you're NOT crazy! When you put all of that work into something, you want it to be perfect!! Especially in a setup that you're going to be spending a lot of time in. Awesome work!
This setup is amazing Ed ! My wife watched this series with me and now I have work to do to get hers looking that good.
ED, you can put a flat monitor at the bottom and turn it up side down so that the non-screen bar will go below the curved one and no part of that flat monitor will be covered by that curved one
That feeling of turning on the new pc and panicing because something is not plugged in, weve all been there fellow builders. LOL
omg look at the little hand at 26:28 AWW
Had that monitor for 1 year almost. very happy with it!
I honestly cannot believe you actually did it. And practically by yourself. You sir, are a setup god. The amount of dedication you’ve put into this project is commendable. I think the result of this work is more than any trophy is worth. Amazing job Ed, can’t wait for updates.
Bro I am absolutely proud of you. you killed it on this setup man. I am absolutely a fan of the channel and I'm glad to be here
damn, bro got the ikea kitchen 2.0 💀
When he was explaining the weight on the table I was 100% certain that the desk was gonna fall off the wall, I was both relieved and disappointed at the same time when nothing happened
Seeing the Kanto Tuks back in the set up was my favorite part 🥹
👆👆Congratulations you won my prize 🎁..
Thank YOU for taking us along with the process! Looks very clean and I like the aesthetic you went with. Purple is my favorite color and it matches just too good with black and/or white.
Man I can’t believe you are still keeping my artwork as wallpaper. I’ve made the McLaren neon years ago and I saw many people using it as wallpaper. So glad you enjoyed that much. Actually you are inspiring me on going back to make my own artworks since now I work in movies and can’t make my stuff. Cheers and nice job with the channel!
I'm so glad you were finally able to get everything you needed to finish your setup. Can't wait to see the finished product, keep up the good work!
Congratulations 🎉 I am suprising a numbers of fans for this season message on telegram for your gift directly
I love how you can make a video that's equal parts ASMR and "most stressful thing ever." Beautiful set up!
This is the longest series I have ever waited to watch on youtube. Finally gets to see it's conclusion.
24:31 MEIRL when a simple RAM or SSD upgrade goes flawlessly. KEKW
I thought he was gonna say the desk was gonna break
The setup looks good but for the setup master needs one of those crazy custom setups like that one rocket ship one
To prevent the gap u should put black tape between the gap of the monitors
You’ve been blessed by the pc gods
Main takeaway I got, patience is key, and hard work pays off!
now since you got this litte overlap of the high refresh rate monitor to the ultra wide, you could basicallly flip the ultrawide so that you don't loose any screen real estate. since the overlap would only cover the bazzel.
Let’s go! It’s finished and it looks amazing!
Favorite TH-camr frfr
Oh my god bro just looking at this makes me shake, it looks absolutely insane and beautiful. Good work on this. Maybe one day I’ll be able to make my dream setup.
WOW. That looks AMAZING
24:14 I felt that moment so much!
ED you out so much effort into your work you never do it the easy way you do it the best way possible and it always comes out 150 percent your effort in your work is amazing even when its for other people i have respect.
If u flip the top monitor the bottom bezel of the ultra wide can go down a little and u won’t get the gap
Changes I would make if I were to that kind of monitor setup is I would move the top monitor up. Move the top monitor up enough to where the top corners of the side monitors aren't lined up with the top corners of the upper monitor, instead the side monitors top corners would be lined with up about half way up on the upper monitor. Or about high enough to wear the top monitor isn't uncomfortable to look up on, but the bottom monitor isn't uncomfortable to look down. I'd also get a bigger mousepad across the desk mousepad, so it gives a better more filling effect.
Man, Ed, I know the feeling. A couple millimeters off center or out of place? It drives me absolutely batty.
The new setup's coming together real real nice. Looks fantastic.
Instead of watching movies or series while eating, I go straight to your videos, Edgar. Amazing setup!!!!
Gotta give it to you, bro. Ur setup is what every gamer wants. Looking forward to ur full room tour!
I think four words describe this :Fire Setup amazing video
28:52 omg wow!
👆👆Congratulations you won my prize 🎁..
I found it funny that he said "I have to keep my voice down because I don't want to wake up Shela" then continues drilling his monitor mounts into the monitor! 🤣🤣 I bet she woke up from that, I sure would!
Man I got so much inspiration from this! Thank you so much for allowing us to partake in the journey.🔥🔥
This man's panic when the monitor didn't turn on. I feel that. LOL. God I felt that.
Loving the kitchen unboxing set lately.
this set up is insane good job
is this real
LETS GO, I kid you not I've been refreshing my youtube home page for hours 😆
that looks slick, I know you've put so much effort into this but something is still missing, not sure what
What a journey! Congrats Ed!
Awesome set-up Ed. Demonstrating planning and some more planning pays huge dividends. 👌
After criticizing everyone’s setups it shows there’s a reason why he is the top g of setups great vid as always congrats to having the ultimate setup
I'm so proud of you, Ed! This was an AMAZING journey! Thank you for taking us with you! I can't wait for late September!
my first day of middle school is on Monday. Ending of summer break with a banger
Ur attention to detail and hardworking is just amazing brother. I just sat down after painting 3 room in my house. Watched part 3 and 4 and honestly better then watchin some show. Got to learn a lot and get some ideas for my setup soon. Thanks Edgar. 🍻
👆👆Congratulations you won my prize 🎁.
i thought i was a profectionist until i started watching this channel
you give me hope for humanity thanks man