Just installed my frunk. Your video on how to install it made it a lot easier than trying to figure out the instructions included in the box. Even though I watched the video several times before attempting to install. I fell into the same mistakes regarding wiring that you did. I also had the exact same problem you had when attempting to close it for the first time. Luckily it happened to you so I knew exactly what to do. Thanks again for the video. When are you going to put out a video for the install of the foot sensor on the frunk?
You did a fantastic job on this tutorial. I'm sorry to say I got the biggest laughs when the alarm honked and the frunk didn't operate the way you expected the first time. These are the gotchas that happen to everyone no matter how good you are at these things. So thanks for those pro tips to avoid. In fact, you provide all sorts of good "avoidance" recommendations. If you hadn't declared your "amateur" status I would have assumed you are pretty comfortable with these sorts of things. Your technique was really good. Anyway, thanks for this run through. I'll do a little more investigation, particularly to find out the differences that might exist in the process for the Model Y, but after doing that, I'm 99% sure I'll go ahead and do this. When I do, I'll definitely come back and order through your channel. And thanks for the discount when I do. Great job!
Man, that was an awesome walkthrough. Doing all that is one thing, but then doing it while also dealing with all the camera work is something over the top to help the rest of the community. Nice work!
Thanks! Ya it was hard on its own but setting up the cameras and lights with each angle was exhausting. Started at 7am and finished at 9:30pm...What a day...
Awesome video. I recently bought both the Frunk and the Trunk kits from Hansshow, and your video was perfect as a companion to when I installed mine today (5/31/2020). It was a really easy install thanks to the confidence you instilled in me. Thanks! --Cintoman
Yep, I installed an electric frunk opener on my first Model 3. After 2 years, one day, it wouldn't open. No problem I thought, I'll use the emergency pull behind the little disc on the bumper....only...that didn't work either. The cable had broken on the latch. 600€ later, Tesla managed to open the frunk. On my second Model 3...I didn't bother.
I don't have a Tesla.. but I ended up watching the whole video..LOL!. you did a super great job! Your video is clear and concise, you remind me of ChrisFix, but for regular non wrenching guys, and those mistake shots and trouble shootings are really nice to show.! BTW from a mechanically challenged guy to another, you have a nice garage with nice tool cabinet and work bench.. I always wanted one of those. I don't need one, but I want one. lol.
Thanks man! It is always intimidating to do something like this for me. Would be hard enough to just do it but with all the camera and light setup every 2 minutes....I was scared
Great video. The front is doable. Great DIY video by the way! I’m interested in seeing the video for the rear. The one rear video I saw involves drilling a hole through metal of the trunk - not a great idea because of future rust problems. I live in an area that uses salt and mag-chloride in the winter. It starts rusting on any bare metal the creeps like cancer under the paint. Thank you for this!
thanks for this vid man, invaluable! glad that all that 'trouble' happened to you, cus then its easier for us all to know what to do if we did come across issues. either way, thanks again!!
Very nice! I've been looking at these for a while but all the install videos I have watched have been for the truck and that looks way harder than the frunk. I may do it just for the frunk since you made it look so darn easy! Keep up the great work with the videos!
Thanks for the detailed multi take step by step! Yours by far is the best tutorial. Even better than ones from the sellers themselves! The quality of your content is excellent! Subscribed!
Even though I dont own a tesla, the thing which made me go crazy was the fact that why isn't the frunk motorized, and Until this video popped out I thought that model 3 will never have a motorized frunk, but here we go I guess 😉, by the way is there any side effect to this modification because I am planning to buy Model 3, and everyone knows that Side effect is the 2nd name of Modification(s), By the way I love your videos, Congratulations you have a new subscriber!
Well, like a few other folks here, I’ve got to say, that was a very informative install video of the Hannshow auto frunk - easily the best to date. So, I hope you don’t mind that when I purchased the foot activation switch from Hannshow today, I suggested they show your video on their website... That all said, there’s no excuse for me now not to install my own kit which has been sitting in its box for nearly 2 months!!! Again, nice job! Cheers
Cf Tesla, just had confirmation from Hannshow that they will be posting your video on their website soon as they agreed with me (and others) that it was good. Hope this is ok with you. Cheers
New subscriber here. Great installation vid. But I was wondering why you didn't show the caliberation...press the button until you hear 2 beeps. Then press and hold for setting the speeds.
Usually when applying adhesives or tape you usually want to clean the surface from dirt and oil, not by rubbing your oily fingers all over the mounting area. A microfiber and rubbing alcohol is the right way
I did yes! But unfortunately not while I was recording. I was on hour 15 when I finished and my brain was mush. Problem is it only works when the battery is dead so hard to test.
Thank you for the video Cody! I would only try to place the control unit on an angle (vertical would be the best) with the bag opening down to let gravity help you out with water spray and moisture.
Great work. Larry is a awesome guy. I love my auto opener. Be careful with the auto foot opener. It my accidentally open on you if you forget to lock the doors. Talk to Larry about it before you get the foot opener...
@@CfTesla yes. When I went the car wash i forgot to lock my door and the read trunk opened, because the sprayer set off the foot sensor... the last thing you want it the frunk to open during rain while driving, especially in the freeway.
This looks way too complicated for me and I am scared to death of messing it up, I think I will go with the hood strut options as I just want the hood to open up on its own. But nice video !
They called that one part a speaker because.....it's a speaker! That's where the beeping noise comes from. Here's a question, if your 12volt battery dies and you use a 9volt battery to open the Frunk, will the Hansshow allow you to lift the hood? Or are they locked in place without power?
How does this work with the touch screen inside of the car? When you tap "Unlock" for the frunk, does it auto lift and auto close as well or is it strictly via mobile device/app ?
Ammmmm made the order last nite. Hope it’s easy as u showed us I can’t change flat tire. So let’s see if I can do that... by the way long will it take to be delivered? And please do the sensor installation so I know how to do it as well. Thank you so much. U made it easier than easy
I actually made it look harder than it was lol. If I wasn't moving cameras and lights ever 2 minutes it would have been smoother. You got this! It arrived pretty quick but I was just informed they were sending it to me so I don't know when they shipped it.
Nice video! You get a Like and a Subscription. I’m still pretty scared to attempt this. However, you really put your arms around the whole project, making it seem reasonable.
T Stanley McGinnis hey thanks! I was quite proud of myself lol! Not at all in my comfort zone...heck I couldn’t ever call the tools their correct names
Great vid, thx! Just installed it. Everything seemed to go well, but I keep getting a closing issue. The frunk closes nicely. But then after 10 to 20 seconds, it suddenly unlocks again. It's then just unlocked but doesn't open. I have to open it manually. Tried to play with the screws (like in your vid) without succes. Any idea?
Hello, I have installed the power frunk but it does not close with the app or from the screen, it only closes with the inner button. To open if it works with the app and the screen. How can I solve that? Thanks.
Cody, you are courageous!! I would never try to do such a job..... Murphy’s law would be working against me!!!! Are you sure you are not a car mechanic????
HA! After yesterday I am a fully certified professional expert. If you were to watch the unedited version it was 5 hours long lol...I took the thing apart so many times getting through that...I really need to start paying attention to the directions.
Hi, I am having issue with my power frunk. I installed it and it is closing fine but then it will open back up. It will stay close for 10 seconds and then automatically it will open. Can you please advise what could be the issue or to whom I should reach out for help?
Can you do a review in 6 months or so to share about the reliability of the device? It would be good to see if it still works well after many uses and time.
The motors or the beeping? Outside of the garage it is actually not that loud. I had very sensitive mics pointed at the car. The beeps come from a little speaker that you could probably just remove.
@@CfTesla the problem is that when you get free stuff to review, it's hard to remain objective. That's why I never trust reviewers comments about a product that was given to them for free.
Placing the device back in the bag is an odd choice. Perhaps it's to product it from the weather? Let's hope it doesn't generate much heat or else you just shortened its lifespan.
Interesting, but why? The frunk isn’t really worth this level of effort. I can see the point of doing the trunk though. Interested in why people want to do this.
Maybe because Tesla clients are mostly geeks, and we love this kind of toys. When you have a highly customisable toy, you may want to add as much features as you can. I just ordered mine, will reveive in august, and already preparing the list of gadgets I will install. Thanks a lot Cf Tesla ! You rock ! Greetings from Paris
lol no it is not...thats what I get for putting myself under the pressure of doing all this and making the video in one day...I was like "challenge accepted". Just wish I would have caught that so I could have called myself out.
Cf Tesla funny thing is people call adjustable wrenchs “crescent wrench” just because they’re the such a wide known maker of said adjustable wrench’s. Just a classic case of genericized trademark.
ELON MUSK SHOULD INSTALL IN ADDITION A MAGNET MOTOR TO RECHARGE THE BATTERIES, IT IS ELECTRICITY FOR FREE AND HE COULD OFFER THIS MOTOR TO ALL OLDER TESLA MODELS AS AN UPGRADE AND YOU WILL NEVER BE OUT OF "FUEL".
Yes when they send that to me...I already have so many things piled in my garage to install that were sent to me but when that arrives it will be a priority.
The body underspray under the frunk tub is absolutely atrocious. Those Teslas are litetally built with the cheapest materials possible, with the crappiest build quality possible. And all the crappyness is hidden under plastic covers. Once you remove those covers, you get to see how atrocious the build quality really is. That said, great tutorial!
A fiação está sobrando muito comprida e deveria personalizar para o modelo três todas as medidas, evita desperdício de fio e melhora o visual evitando poluição visual, por favor não estou criticando só dando uma sugestão ou uma ideia, ok. Grato, espero ter colaborado, paz imaculada desse irmão aqui do Brasil Sul da América de nossa peculiar amada e bela Terra. Sempre grato por Elon Musk com seu Plano Mestre, desejo evolução material (tecnológica) todavia revolução da consciência concomitantemente, afim de que não cometa o mesmo erro de Nimrod da Bíblia com sua famosa Torre de Babel, conquiste primeiro o grau de perfeição ou cristificação, para que possa escalar as esferas ou planetas do nosso sistema solar de ORS, de acordo com a Lei Divina, porque até hoje estamos pagando pelo erro da Babilônia de outrora a confusão de línguas, peço como amigo a Elon Musk para fazer segundo a Lei de Divina por favor fazer chegar a ele, sem autorização do Regente da Terra seria violação...
![⭐️( ลอยกระทง 2024 ) Ver. แดนซ์ Remix BY [ ดีเจกิต รีมิกซ์ ]](http://i.ytimg.com/vi/rMWOLhgXUHc/mqdefault.jpg)
Just so I don't mislead you all and cause you to doubt everything you were ever told...That is not a crescent wrench it is a socket wrench!
Now the World 🌎 can continue to spin😂
& it’s a bolt not a screw🤓🙃
...& vise grips, not crescent wrench ✌🏼🙏🌎
Moral of the story is let Larry do it 😆 great video
The mechanic in me is both disappointed in your lack of car/tool knowledge, and proud of you because this is one of the best tutorials I've seen.
haha...the tool thing was just pure "oops" I know what a socket wrench is. I did warn everyone first
Tesla needs to make this a standard feature on ALL of their vehicles.
or at least as an option
that's what i thought so. I'm pretty sure they'll offer it through their online shop
Awesome video man. One thing I got from it is I’m not messing with my car’s frunk. LOL :)
lol ya if there was an installer in WA I would have definitely gone there but it really wasn't bad.
I watched several of these frunk motorization tutorials out of boredom - yours is the best.
Nice! Thanks man! I almost punched holes all over my garage but i got through it
@@CfTesla :o)
Just installed my frunk. Your video on how to install it made it a lot easier than trying to figure out the instructions included in the box. Even though I watched the video several times before attempting to install. I fell into the same mistakes regarding wiring that you did. I also had the exact same problem you had when attempting to close it for the first time. Luckily it happened to you so I knew exactly what to do. Thanks again for the video. When are you going to put out a video for the install of the foot sensor on the frunk?
i installed myself, frunk and trunk! thanks to Larry for the helps he gave me as i am living in UAE!!!
Remove the crap, followed by removing the hvac thing.
Those 2 subtitles, just 90seconds in, exactly explain why I love your content Cody 😂👍👏👏👏
lol that was the most technical name I could think of
You did a fantastic job on this tutorial. I'm sorry to say I got the biggest laughs when the alarm honked and the frunk didn't operate the way you expected the first time. These are the gotchas that happen to everyone no matter how good you are at these things. So thanks for those pro tips to avoid. In fact, you provide all sorts of good "avoidance" recommendations. If you hadn't declared your "amateur" status I would have assumed you are pretty comfortable with these sorts of things. Your technique was really good.
Anyway, thanks for this run through. I'll do a little more investigation, particularly to find out the differences that might exist in the process for the Model Y, but after doing that, I'm 99% sure I'll go ahead and do this. When I do, I'll definitely come back and order through your channel. And thanks for the discount when I do.
Great job!
I was thinking I don’t want a power trunk that bad, but after seeing it in action, I gotta say… that’s pretty pimp!!
This is the best installation video I've ever seen. Good clear video and good commentary/instruction.
Thank you!
Man, that was an awesome walkthrough. Doing all that is one thing, but then doing it while also dealing with all the camera work is something over the top to help the rest of the community. Nice work!
Thanks! Ya it was hard on its own but setting up the cameras and lights with each angle was exhausting. Started at 7am and finished at 9:30pm...What a day...
@Cf Tesla you did look a little frazzled (hair) in a couple shots!!!!
Awesome video. I recently bought both the Frunk and the Trunk kits from Hansshow, and your video was perfect as a companion to when I installed mine today (5/31/2020). It was a really easy install thanks to the confidence you instilled in me. Thanks!
--Cintoman
Yep, I installed an electric frunk opener on my first Model 3. After 2 years, one day, it wouldn't open. No problem I thought, I'll use the emergency pull behind the little disc on the bumper....only...that didn't work either. The cable had broken on the latch. 600€ later, Tesla managed to open the frunk. On my second Model 3...I didn't bother.
I don't have a Tesla.. but I ended up watching the whole video..LOL!. you did a super great job! Your video is clear and concise, you remind me of ChrisFix, but for regular non wrenching guys, and those mistake shots and trouble shootings are really nice to show.! BTW from a mechanically challenged guy to another, you have a nice garage with nice tool cabinet and work bench.. I always wanted one of those. I don't need one, but I want one. lol.
Thanks man! It is always intimidating to do something like this for me. Would be hard enough to just do it but with all the camera and light setup every 2 minutes....I was scared
Definitely the best tutorial I've seen on these installs. Would like to do this later this summer!
It's a fun one
Great video. The front is doable. Great DIY video by the way!
I’m interested in seeing the video for the rear. The one rear video I saw involves drilling a hole through metal of the trunk - not a great idea because of future rust problems. I live in an area that uses salt and mag-chloride in the winter. It starts rusting on any bare metal the creeps like cancer under the paint.
Thank you for this!
Ya I don't think I will attempt that one on my own.
thanks for this vid man, invaluable! glad that all that 'trouble' happened to you, cus then its easier for us all to know what to do if we did come across issues. either way, thanks again!!
Glad it helped!
Just so I don't mislead you all and cause you to doubt everything you were ever told...That is not a crescent wrench it is a socket wrench!
Your “crescent wrench” looks a lot like a Socket wrench! 😂 Another great tutorial!
HAHAHA! Darn I missed that one. We should start a game on my installs to see how many mistakes we can find.
And those "screws" look a lot like bolts :-)
Cf Tesla I’m down! Honestly, I prefer non scripted vids...that makes yours so entertaining. 😂
All I can say is....wow. smh
James Lawson thanks James. I’m no professional nor do I pretend to be. Just having fun
Great lighting on the install
Cool!, I didn't realize you're in WA. I'm hoping to pickup my car in a couple of weeks! very excited.
Is the lift still working good?
For not being a mechanic, you did great.
Very nice! I've been looking at these for a while but all the install videos I have watched have been for the truck and that looks way harder than the frunk. I may do it just for the frunk since you made it look so darn easy! Keep up the great work with the videos!
Thanks Shonn! It looks harder than it is for sure. I kind of enjoyed it
Thanks for doing this CF! Now I know for sure I will never ever ever ever want to do this install! Not worth it IMO!
Cody, that was a great video, you had the courage to put yourself out there and proved it easy to do. Thank you for doing this video!
Mark Zanghetti thanks Mark! I was terrified to attempt it
Thanks for the detailed multi take step by step! Yours by far is the best tutorial. Even better than ones from the sellers themselves! The quality of your content is excellent! Subscribed!
Even though I dont own a tesla, the thing which made me go crazy was the fact that why isn't the frunk motorized, and Until this video popped out I thought that model 3 will never have a motorized frunk, but here we go I guess 😉, by the way is there any side effect to this modification because I am planning to buy Model 3, and everyone knows that Side effect is the 2nd name of Modification(s), By the way I love your videos, Congratulations you have a new subscriber!
Well, like a few other folks here, I’ve got to say, that was a very informative install video of the Hannshow auto frunk - easily the best to date.
So, I hope you don’t mind that when I purchased the foot activation switch from Hannshow today, I suggested they show your video on their website...
That all said, there’s no excuse for me now not to install my own kit which has been sitting in its box for nearly 2 months!!!
Again, nice job! Cheers
Grant Valentine thank you so much Grant! I would love to be featured in their website!
Cf Tesla, just had confirmation from Hannshow that they will be posting your video on their website soon as they agreed with me (and others) that it was good. Hope this is ok with you. Cheers
The First .30 sounds a lot like me! Thanks for sharing this video! Really easy to follow step by step.
haha have you done this yet?
Cf Tesla Not yet but when I do I’m definitely referring back to this video for sure!
New subscriber here. Great installation vid. But I was wondering why you didn't show the caliberation...press the button until you hear 2 beeps. Then press and hold for setting the speeds.
Usually when applying adhesives or tape you usually want to clean the surface from dirt and oil, not by rubbing your oily fingers all over the mounting area. A microfiber and rubbing alcohol is the right way
Great video! Brilliant. Just one quick question, did you test the emergency release?
I did yes! But unfortunately not while I was recording. I was on hour 15 when I finished and my brain was mush. Problem is it only works when the battery is dead so hard to test.
Thank you for the video Cody! I would only try to place the control unit on an angle (vertical would be the best) with the bag opening down to let gravity help you out with water spray and moisture.
I didn't dare get creative with my limited knowledge. I just did what the installers I was talking with told me to do.
Great work. Larry is a awesome guy. I love my auto opener. Be careful with the auto foot opener. It my accidentally open on you if you forget to lock the doors. Talk to Larry about it before you get the foot opener...
Ok good advice. So you are saying it may open while driving or while parked?
@@CfTesla yes. When I went the car wash i forgot to lock my door and the read trunk opened, because the sprayer set off the foot sensor... the last thing you want it the frunk to open during rain while driving, especially in the freeway.
Very nice, are you going to fit the trunk opener?
This looks way too complicated for me and I am scared to death of messing it up, I think I will go with the hood strut options as I just want the hood to open up on its own. But nice video !
Thank you for sharing your experience with us. Which unit should I get for my Model Y.
On their website I believe you just put in what car you have then it tells you.
27:45 probably to reduce wear and tear on the actuators
They called that one part a speaker because.....it's a speaker! That's where the beeping noise comes from.
Here's a question, if your 12volt battery dies and you use a 9volt battery to open the Frunk, will the Hansshow allow you to lift the hood? Or are they locked in place without power?
Good question. Didn't test that but should
@@CfTesla I hope you do test that, I'm interested in knowing the answer.
How does this work with the touch screen inside of the car? When you tap "Unlock" for the frunk, does it auto lift and auto close as well or is it strictly via mobile device/app ?
It's been 2 years, any issues with the motorized frunk lift?
A+ Job Cf Tesla👍🏻 what’s Cf stand for??
Hey Dave. They are my Initials. Cody Fair
Ammmmm made the order last nite. Hope it’s easy as u showed us I can’t change flat tire. So let’s see if I can do that... by the way long will it take to be delivered? And please do the sensor installation so I know how to do it as well. Thank you so much. U made it easier than easy
I actually made it look harder than it was lol. If I wasn't moving cameras and lights ever 2 minutes it would have been smoother. You got this! It arrived pretty quick but I was just informed they were sending it to me so I don't know when they shipped it.
Nice video! You get a Like and a Subscription. I’m still pretty scared to attempt this. However, you really put your arms around the whole project, making it seem reasonable.
T Stanley McGinnis hey thanks! I was quite proud of myself lol! Not at all in my comfort zone...heck I couldn’t ever call the tools their correct names
Nicely done. It's well worth investing in a spring hook or a set of them. :) I think I'll also use some blue threadlocker if I do it.
Thanks
@@CfTesla NP!
Great vid, thx! Just installed it. Everything seemed to go well, but I keep getting a closing issue. The frunk closes nicely. But then after 10 to 20 seconds, it suddenly unlocks again. It's then just unlocked but doesn't open. I have to open it manually. Tried to play with the screws (like in your vid) without succes. Any idea?
Can you close the frunk from the screen inside the car?
Will Tesla void the warranty if this install has any side affects which interferes with them servicing the vehicle or causes other electrical faults?
No
Hello, I have installed the power frunk but it does not close with the app or from the screen, it only closes with the inner button.
To open if it works with the app and the screen.
How can I solve that?
Thanks.
Can't it open while driving if it's connected to the emergency button?
Step 1. Take your Apple Watch off. I always forget that step too. lol. Thanks for the video!
Why take it off? I needed my step count man!
Haha! I always seem to scratch mine.
Cody, you are courageous!! I would never try to do such a job..... Murphy’s law would be working against me!!!! Are you sure you are not a car mechanic????
HA! After yesterday I am a fully certified professional expert. If you were to watch the unedited version it was 5 hours long lol...I took the thing apart so many times getting through that...I really need to start paying attention to the directions.
You are awesome!!!
Hi,
I am having issue with my power frunk. I installed it and it is closing fine but then it will open back up. It will stay close for 10 seconds and then automatically it will open. Can you please advise what could be the issue or to whom I should reach out for help?
It's the debugging plug, you have to re-plug in the original tesla plug
You got Larry’s number wrong. It’s area code 510, not 501.
Very clear and detailed video. 👍
Glad you liked it
Does this work with the tesla app?
Can you do a review in 6 months or so to share about the reliability of the device? It would be good to see if it still works well after many uses and time.
I'll be doing follow up videos on all my accessories as the channel goes along...assuming I don't get board
Can i do that in an standard range car, since they have only one rear motor?
Now you can try this 😁 automatic handles on Tesla Model 3 : la Review th-cam.com/video/PMKtlldzzCI/w-d-xo.html
Does it work when you hit "open" from the center screen inside the car?
Is this the same for Model Y?
Mi puoi dare il link del kit di montaggio grazie
Very nice product and video. Thank you
Thanks!
5:20 why then did you kept it in the video ?
That is absolutely awesome!!!
Thanks
Can you play with audio levels, super fluctuating. Especially intro is insanely loud and the rest is uneven.
Thanks though love the video.
Can you still use the Tesla app to open it?
and the button on the screen?
I thought the control box comes with a rubber protective cover to go over the bag? You don't seem to have used it?
It does...I couldn't get it in...
Very nice. Cool idea
yup
great video
thank you
Just want to confirm it’s opening and closing from the Tesla app and the car display? No third party app?
Any app that sends the open command it will open for. I was using Stats but works the same from Tesla app as well as screen in car.
I was having same issues and couldn’t resolve so I returned it.. I gave up
Sorry to hear that. It can be tricky
Nice job on this video
Thanks! Too bad you didn't teach me what a crescent wrench was lol...jk sorry dad I am sure I embarrassed you on the tools.
Yes, this is what Tesla should have from factory. Weird it doesn't. I mean S/X definitely, 3/Y should have that as premium.
Awesome!!! I really love Tesla
The anti static bag is really unnecessary.
Nice work, great video.
Garry Lam thanks Garry
Cf Tesla will use your video to install it into my M3. Does it work on model year 2020? Thanks for the info.
No way I would even begin to try this.
haha ya it can be intimidating but no big deal really.
Sounds loud. Does it get quieter?
The motors or the beeping? Outside of the garage it is actually not that loud. I had very sensitive mics pointed at the car. The beeps come from a little speaker that you could probably just remove.
Sigh. I'd love to buy this for my trunk, but the price is still way too high 😢. And that's not including installation which is another $300. Oh well.
It is pricy. Do this...start a youtube channel, get over 5k followers and they will send you it for free...done!
@@CfTesla the problem is that when you get free stuff to review, it's hard to remain objective. That's why I never trust reviewers comments about a product that was given to them for free.
Dan what part of that looked like I was holding back the truth? This is why I never cut out my mistakes
@@CfTesla I'm just saying. Because it's always better to review products you actually purchase. That's the only way people can believe the review.
What is the best wax and soap to use on the model Y? Anyone?
Does this void warranty?
Nope. Since it doesn’t wire until the system I’m told
"I know nothing about cars".... is famous for his TH-cam channel devoted to a model of car.... :-)
I know about the tech not the mechanics
great video as usual. I was born with two left hands lol. can't do that, $1,000 right now with all this corona thing going? I'm just gonna wait.
$1,000? Oh you mean for both? Ya it adds up. I think I am over $3k in accessories on my car at this point lol.
Is still working the garbage hansshow frunk or is siezed by now?
Placing the device back in the bag is an odd choice. Perhaps it's to product it from the weather? Let's hope it doesn't generate much heat or else you just shortened its lifespan.
Interesting, but why? The frunk isn’t really worth this level of effort. I can see the point of doing the trunk though. Interested in why people want to do this.
Maybe because Tesla clients are mostly geeks, and we love this kind of toys. When you have a highly customisable toy, you may want to add as much features as you can.
I just ordered mine, will reveive in august, and already preparing the list of gadgets I will install.
Thanks a lot Cf Tesla ! You rock !
Greetings from Paris
@@homerbobodivebuddies9369 Exactly! Kind of like adding that escape route from TH-cam to enable watching Disney+ in your car (Avengers rock!)
That’s not a Crescent wrench 🔧
Jeremiah Powell could be a crescent brand rachet wrench lol.
lol no it is not...thats what I get for putting myself under the pressure of doing all this and making the video in one day...I was like "challenge accepted". Just wish I would have caught that so I could have called myself out.
@@darknessownzgaming4188 See....thats it!
Cf Tesla funny thing is people call adjustable wrenchs “crescent wrench” just because they’re the such a wide known maker of said adjustable wrench’s. Just a classic case of genericized trademark.
So anyone could pull the emergency trunk release hmmmm not very safe at all
No used to be that way if you also had a battery to hookup but no longer. I made a video on this if you want to find out how it works
Wow intro was SUPER loud
яка ціна такого мотора?
ELON MUSK SHOULD INSTALL IN ADDITION A MAGNET MOTOR TO RECHARGE THE BATTERIES, IT IS ELECTRICITY FOR FREE AND HE COULD OFFER THIS MOTOR TO ALL OLDER TESLA MODELS AS AN UPGRADE AND YOU WILL NEVER BE OUT OF "FUEL".
Anyone you know in NJ to install ?
No but I can reach out to Hansshow to see who they recommend if you would like?
Yes
Are you going to make the trunk ?
Yes when they send that to me...I already have so many things piled in my garage to install that were sent to me but when that arrives it will be a priority.
I will stick with myl trunk release and actually use my 2 hands to close my FRUNK. Save the $1000 and your time for something else.
I don't even own a Tesla 😂
The body underspray under the frunk tub is absolutely atrocious. Those Teslas are litetally built with the cheapest materials possible, with the crappiest build quality possible. And all the crappyness is hidden under plastic covers. Once you remove those covers, you get to see how atrocious the build quality really is. That said, great tutorial!
A fiação está sobrando muito comprida e deveria personalizar para o modelo três todas as medidas, evita desperdício de fio e melhora o visual evitando poluição visual, por favor não estou criticando só dando uma sugestão ou uma ideia, ok. Grato, espero ter colaborado, paz imaculada desse irmão aqui do Brasil Sul da América de nossa peculiar amada e bela Terra. Sempre grato por Elon Musk com seu Plano Mestre, desejo evolução material (tecnológica) todavia revolução da consciência concomitantemente, afim de que não cometa o mesmo erro de Nimrod da Bíblia com sua famosa Torre de Babel, conquiste primeiro o grau de perfeição ou cristificação, para que possa escalar as esferas ou planetas do nosso sistema solar de ORS, de acordo com a Lei Divina, porque até hoje estamos pagando pelo erro da Babilônia de outrora a confusão de línguas, peço como amigo a Elon Musk para fazer segundo a Lei de Divina por favor fazer chegar a ele, sem autorização do Regente da Terra seria violação...