Thank you so much Adam, that's what Im looking for, switch from Elementor to GeneratePress. Just a little recommend that should you put your face on the bottom left. That's not hide the configuration panel so we can see what you changed clearly.
Well done Adam!! Thank you once again, it all makes sense now, that's because the steps that you show here in your video have made it into such a simple process.
Hey Adam. Great tutorial. You could have wrapped the Post title, excerpt and data inside a container of their own and apply the margin/padding there instead so as not to have to repeat the same spacing for each of them.
Hey Adam, thanks for creating these amazing tutorials. I'm trying to build a software listing website using GP Premium and GB Free version. I've created categories loop templates. However, I'm trying to figure out how to display the elements on the homepage. Under display rules, I've set the locations to - front page, all archives, tools category archive. Plugins I'm using - ACF and Filter Everything.
Hello sir, Thank you so much for this beautiful tutorial, and I faced few problems as well, at first post images were not showing in *Query Loop* but when I changed images, it showed the same images in both posts. I would also like to request you to upload a second video from scratch. For someone like me who is newbie. Thanks once again, learnt so much from your video.
Hi Adam, Great tutorial! I have a question for you. I saw on your website, Adam Wright Design, that you have a new design for the query loop where you have the category over the image. I love the idea of doing that, so how do I do that?
Hey Sonia! Thanks so much! To achieve the look I have on my site, you would put the category first, then the featured image below it and add negative margin to that image block. You may need to change the z-index of the category headline block to 2, to bring it on top of the image.
It sure does! If you enter a headline block in the Post Template container, and select the appropriate dynamic content setting for the Author Meta you're looking for, it'll populate for you 👍
I have a question about the List of Terms... is there a way to display two categories and have them in separate buttons? Mine are sort of squished together even with the comma. Thanks
This is a great question! I haven't achieved that before, and not sure how that'd work. GenerateBlocks support is amazing, they might be the best option to reach out to and ask!
Great video! Thanks! For the taxonomy, can I show the names of a sub- categories or even a sub- sub- category? Also, can I use this for pages (by showing the parent directory name of the pages in the taxonomy)?
Hey Adam, if I may ask, in your newsletter (Design to Dollars) in the query loop, above each title you have the numbering for each post (#001, #002), how did you add that?
Really nice! I have created the Query Loop, but is there any possible to let query loop filter automatically by category type? Like if I clip the Dogs tag, it will directly show all the post with dogs tag on query loop.
Hey there. I haven't gotten into filters yet - but if you're referring to just showing ONLY a specific category of posts on a particular page, just be sure to select that taxonomy in your dynamic settings.
Hi Adam! I just want to say that your videos are super helpful! You have an excellent gift for educating. Thanks again; your videos are my go-to reference for generating press. If you ever need anything digital design-wise, hit me up. I would love to return the favor.
Thanks Adam -that helped a lot! Any idea how I can FILTER my blog posts according to terms searched from the categories? (Maybe I have made the error of allocating each post to numerous categories instead of just one) John
Thanks for the video great info. I was just wondering how would i limit it so that the query loop is only pulling in one category only to the view eg just Posts on Dogs category instead off all category posts. thanks
Exellent video. Thanks for sharing. Can you please move the round video footage of yourself to the left. It hides somthing you are showing at the buttom of the block editor.
Thanks a lot! I apologize about the cover up there...definitely failed! If there's something specific I covered up on accident that you're wanting to know about let me know.
Yes, there is! When you add a new Query Loop with GB, look in the tool bar for the + icon - click that and it will add pagination (it's with their Buttons block).
@@adamwrightdesign when i am editing the query loop, it's showing me buttons at the bottom with next, previous and page numbers, i setup everything and selected the page as default home page but i am not seeing those buttons with next and previous now on live site instead there are only numbers at the bottom of the page :(
Hi Adam, I am getting the same image on all the posts. How do we get the different images on different posts when using query loop ? For example - like you have shown in this video .
@@adamwrightdesign Thank you. Sorry, need to ask you one more thing. I am trying to put the query loop on the post page but not seeing any effect, all I see is all the posts and they are not in the way I want to see by using a query loop.
@@productreviewsbabaWhen you have created the Query Loop you want to show on your posts pages, make sure you are selecting the right 'Location' option. To display on your posts page, select 'Posts Archive' - that'll do the job!
Awesome tutorial specially for those new to GP/GB like me. However, it would have been perfect (at least for me) if the PIP of yourself is moved away from the lower right as it obstructs the settings you were doing and viewers could not see exactly where you're doing it. We could hear you just fine so my suggestion is to 'turn off' PIP so we could see those settings you're tweaking. Just my two cents.
I have a question. I have a total number of 73 posts, but I only klicked in the query-loop-menu, that 10 posts per page are on my blogpage. Now there is no button to klick on page 2, where you can see the next 10 posts. Do you have any recommendation what i can do, so that the visitor can see the next blogposts on page 2, 3 and so on?
Ahh I just found it - you just need to click on the query loop and there is something called pagination, that´s the solution. Maybe it´s helping somebody here ;)
At 12:12 - the Post date to have it evenly across - how does it work with the updated version of Generate Press. Since the "Auto" at Margin Top doesn't work
@@adamwrightdesign Oh, I got it. I actually had the 'Post Template' container to 100% height but did not set it to Flex -> Column in the first place. Thanks! :)
Hi Adam, I have open my BLOG PAGE and I create a beautifull QUERY LOOP following yors rules but, as soon I UP GRADE the new QUERY LOOP BLOG PAGE, I got the old one (?). I open again the WP editor BLOG PAGE and I got the QUERY LOOP stile(?) Can U pls help my to fix this? Many THX Roberto - Italy - Milan
Hey Roberto. It may be that you are trying to edit the page that you have your “latest posts” set to. Go to your settings > reading and remove the Blog page from the latest posts setting.
Hi Adam and THX for yr answer I read. Unfortunately this matter is not fix jet. The rules I foolws are: > element > create new > block > position block > new block > query loop > template 2 columns > element type > loop template I create in the backend my page but, in the frontend I get the old one (?)@@adamwrightdesign
![ตีสิบเดย์ [FULL] | เปิดใจ "อาจารย์ เบียร์ ฅนตื่นธรรม" นักสนทนาธรรมสายดุดัน!](http://i.ytimg.com/vi/vqaBI_mnoDk/mqdefault.jpg)
You are such a pro!!
Thank you so much Adam, that's what Im looking for, switch from Elementor to GeneratePress. Just a little recommend that should you put your face on the bottom left. That's not hide the configuration panel so we can see what you changed clearly.
Well done Adam!! Thank you once again, it all makes sense now, that's because the steps that you show here in your video have made it into such a simple process.
Thank you Coral! 💙
This is a really great tutorial. I have added something similar to a few of my pages. Thanks!
Thanks a lot!
THANK YOU! This was very easy to follow along.
Thanks so much Adam. I really appreciate your content and channel. Clear and concise presentation at the perfect pace.
That means a lot, thank you! 🙌
Really Informational .... Thank you for sharing the same
This is awesome😊, thank you for helping
Nice demo Adam, thanks!
Thank you, Richard!
very nice
Hey Adam. Great tutorial. You could have wrapped the Post title, excerpt and data inside a container of their own and apply the margin/padding there instead so as not to have to repeat the same spacing for each of them.
Thanks Ryan! Definitely a couple of ways you could go about it 👍
Hey Adam, thanks for creating these amazing tutorials.
I'm trying to build a software listing website using GP Premium and GB Free version. I've created categories loop templates.
However, I'm trying to figure out how to display the elements on the homepage.
Under display rules, I've set the locations to - front page, all archives, tools category archive. Plugins I'm using - ACF and Filter Everything.
This is exactly what I was looking for! Thanks
awesome bro thanks!
Hello sir,
Thank you so much for this beautiful tutorial, and I faced few problems as well, at first post images were not showing in *Query Loop* but when I changed images, it showed the same images in both posts.
I would also like to request you to upload a second video from scratch. For someone like me who is newbie.
Thanks once again, learnt so much from your video.
Forgot to make U my compliments for yours beutifull video with GP - THX Roberto
I love your videos! Idea for one of your next tutorials: Create an infinite loop carousel / logo showcase with gp/gb
Thank you Adria! I'll keep that in mind!
Hi Adam,
Great tutorial! I have a question for you. I saw on your website, Adam Wright Design, that you have a new design for the query loop where you have the category over the image. I love the idea of doing that, so how do I do that?
Hey Sonia! Thanks so much! To achieve the look I have on my site, you would put the category first, then the featured image below it and add negative margin to that image block. You may need to change the z-index of the category headline block to 2, to bring it on top of the image.
@@adamwrightdesign Hey Adam, thanks. I will try it for sure!
Thanks, Adam, for a clear and instructive video. Does the QL block also allow the addition of author meta?
It sure does! If you enter a headline block in the Post Template container, and select the appropriate dynamic content setting for the Author Meta you're looking for, it'll populate for you 👍
This is a cool feature. GenerateBlocks seems to be similar with Kadence Blocks, but Kadence hasn't published loop block.
Yes, I love the query loop block!
I have a question about the List of Terms... is there a way to display two categories and have them in separate buttons? Mine are sort of squished together even with the comma. Thanks
This is a great question! I haven't achieved that before, and not sure how that'd work. GenerateBlocks support is amazing, they might be the best option to reach out to and ask!
@@adamwrightdesign Thanks! I realize I need to reduce my categories anyway.
Nice website layout! *Does this required GenerateBlocks Pro* , or can this be done with Lite?
I am honestly not sure, all I use is the Pro version!
Great video! Thanks! For the taxonomy, can I show the names of a sub- categories or even a sub- sub- category? Also, can I use this for pages (by showing the parent directory name of the pages in the taxonomy)?
Hey there! You can keep adding parameters in the Query Loop block for additional Taxonomies as needed. I am not too sure about the pages part, though.
Thank you!
Hey Adam, if I may ask, in your newsletter (Design to Dollars) in the query loop, above each title you have the numbering for each post (#001, #002), how did you add that?
It's just using a Custom Field, and I manually enter the issue number in the editor. It's then dynamically pulled in through a headline block.
@@adamwrightdesign thanks!
Thanku so so much 😊😊
Really nice! I have created the Query Loop, but is there any possible to let query loop filter automatically by category type? Like if I clip the Dogs tag, it will directly show all the post with dogs tag on query loop.
Hey there. I haven't gotten into filters yet - but if you're referring to just showing ONLY a specific category of posts on a particular page, just be sure to select that taxonomy in your dynamic settings.
Hi Adam. Just implemented your design, but for some reason GP defaults to the Customizer setup rather than your setup. Any idea what the problem is?
Hi Adam! I just want to say that your videos are super helpful! You have an excellent gift for educating. Thanks again; your videos are my go-to reference for generating press. If you ever need anything digital design-wise, hit me up. I would love to return the favor.
Really appreciate the kind words! 🙌
Thanks Adam -that helped a lot!
Any idea how I can FILTER my blog posts according to terms searched from the categories? (Maybe I have made the error of allocating each post to numerous categories instead of just one)
John
Hey John. Are you talking about a search results type of page? Or just creating a query loop of certain categories?
Thanks for the video great info. I was just wondering how would i limit it so that the query loop is only pulling in one category only to the view eg just Posts on Dogs category instead off all category posts. thanks
You need to add an additional parameter in your query loop, and choose Taxonomies, then Category, and then choose your Category 👍
thanks
Exellent video. Thanks for sharing. Can you please move the round video footage of yourself to the left. It hides somthing you are showing at the buttom of the block editor.
Thanks a lot! I apologize about the cover up there...definitely failed! If there's something specific I covered up on accident that you're wanting to know about let me know.
thanks :)
Additionally, is there a way to put pagination on the Query Loop so users can view older/newer posts than the 6 displayed?
Yes, there is! When you add a new Query Loop with GB, look in the tool bar for the + icon - click that and it will add pagination (it's with their Buttons block).
@@adamwrightdesign when i am editing the query loop, it's showing me buttons at the bottom with next, previous and page numbers, i setup everything and selected the page as default home page but i am not seeing those buttons with next and previous now on live site instead there are only numbers at the bottom of the page :(
Hi Adam, I am getting the same image on all the posts. How do we get the different images on different posts when using query loop ? For example - like you have shown in this video .
Those are your blog posts featured images. Make sure you change them for each post and they'll be different on the query loop!
@@adamwrightdesign Thank you. Sorry, need to ask you one more thing. I am trying to put the query loop on the post page but not seeing any effect, all I see is all the posts and they are not in the way I want to see by using a query loop.
@@productreviewsbaba I'm sorry, not sure exactly how to help!
@@productreviewsbabaWhen you have created the Query Loop you want to show on your posts pages, make sure you are selecting the right 'Location' option. To display on your posts page, select 'Posts Archive' - that'll do the job!
Hey can we add the category button on top left corner of the container,ie on the featured image
You sure could!
Awesome tutorial specially for those new to GP/GB like me. However, it would have been perfect (at least for me) if the PIP of yourself is moved away from the lower right as it obstructs the settings you were doing and viewers could not see exactly where you're doing it. We could hear you just fine so my suggestion is to 'turn off' PIP so we could see those settings you're tweaking. Just my two cents.
Hey Romel. I appreciate the feedback! Thanks for watching!
I have a question. I have a total number of 73 posts, but I only klicked in the query-loop-menu, that 10 posts per page are on my blogpage. Now there is no button to klick on page 2, where you can see the next 10 posts. Do you have any recommendation what i can do, so that the visitor can see the next blogposts on page 2, 3 and so on?
Ahh I just found it - you just need to click on the query loop and there is something called pagination, that´s the solution. Maybe it´s helping somebody here ;)
@@spiritualpowerart8492 yes, here's the doc for reference! docs.generateblocks.com/article/query-loop-overview/#pagination
Cool, thanks! @@adamwrightdesign
At 12:12 - the Post date to have it evenly across - how does it work with the updated version of Generate Press. Since the "Auto" at Margin Top doesn't work
Hey Mike! It still works with the latest version. Did you make sure you set the 'Post Template' container to 100% height?
@@adamwrightdesign Oh, I got it.
I actually had the 'Post Template' container to 100% height but did not set it to Flex -> Column in the first place.
Thanks! :)
hi, any idea how to do filters on the query loop? free option please
Hey Robert, I haven’t achieved that kind of functionality yet. You could definitely reach out to GB support!
If I want to display only the names of subcategories instead of posts or pages, how can I do that?
Should be an option in the dynamic data dropdowns!
Nice tutorial, but unfortunately the right hand panel is covered by you. so I don't know what it's doing in that right-hand panel.
Sorry about that! Which part specifically did you miss?
@@adamwrightdesign dynamic data taxonomy, but I finished it well
Hi Adam, I have open my BLOG PAGE and I create a beautifull QUERY LOOP following yors rules but, as soon I UP GRADE the new QUERY LOOP BLOG PAGE, I got the old one (?). I open again the WP editor BLOG PAGE and I got the QUERY LOOP stile(?) Can U pls help my to fix this? Many THX Roberto - Italy - Milan
Hey Roberto. It may be that you are trying to edit the page that you have your “latest posts” set to. Go to your settings > reading and remove the Blog page from the latest posts setting.
Hi Adam and THX for yr answer I read.
Unfortunately this matter is not fix jet. The rules I foolws are: > element > create new > block > position block > new block > query loop > template 2 columns > element type > loop template
I create in the backend my page but, in the frontend I get the old one (?)@@adamwrightdesign
Please cancel my query. Sorted it out. Thanks for a nifty design
thanks. Please move your head out of the way.