Civic Wheel Bearing Removal/Install | DIFFICULTIES

แชร์
ฝัง
  • เผยแพร่เมื่อ 9 ก.ย. 2020
  • Hey Guys, In this video I experience a few difficulties while trying to remove and install a new wheel bearing into my '91 Civic knuckle. Learn from my mistakes/issues so hopefully your job goes smoother. Stay tuned for more videos of my 1991 Civic and Integra GS-R.
    ***Amazon Links***:
    Wheel bearing press kit: amzn.to/41GfGNc
    Channel Lock 929 Snap-ring pliers: amzn.to/3vlNl2V
    Ball Joint Separator tool: amzn.to/42bpiQx
    Follow me on Instagram @spencers_garage
  • ยานยนต์และพาหนะ

ความคิดเห็น • 74

  • @darrencedeno8098
    @darrencedeno8098 10 หลายเดือนก่อน +5

    You are the very first person to explain step-by-step

  • @jordanday1813
    @jordanday1813 3 ปีที่แล้ว +12

    This is the video I needed. Most videos I've watched the person just says "Press the bearing in" without any specification of "use a press bearing that ONLY fits the outer race" as well as "use a press bearing that ONLY fits the inner race" that is precisely what I needed to know. Thank you.

  • @Ed-de3ro
    @Ed-de3ro 4 หลายเดือนก่อน +1

    Hi, Spencer's Garage, I just came across your video in search of doing my own wheel bearing replacement myself. Your video is one of the best out there I have seen. You explained everything in detail step by step. Thank you for taking the time to post and share your video. Great job.

  • @TheJakePoole
    @TheJakePoole 3 ปีที่แล้ว +7

    I don't know why, but 19:30 - 19:42 cracked me up. Haha. I'm doing all my front ball joints and wheel bearings, and this video helped a lot. I'm very thankful that my outer races both came out with everything else. I was terrified of dealing with that. Haha. Thanks!

  • @J.E.Taylor
    @J.E.Taylor 2 ปีที่แล้ว +4

    Those pliers would have been super handy when I did the front bearings on our 13 Escape. I used a combo of screwdrivers and small pry bar to work it around and out. Installing it I used one of the adapters in the bearing tool rental kit. Those pliers were so fast!

  • @williamthomas1549
    @williamthomas1549 2 ปีที่แล้ว +2

    Thanks for the video. I am glad for your guidance on mistakes. I make them all the time. You saved me from making the same ones!

  • @ParallaxVisuals
    @ParallaxVisuals 2 ปีที่แล้ว +1

    Thank you for this clip!
    I wish i’d seen it before leaving my car only with 3 wheels in the garage…..
    thanks for the complete clip with all the messups!

  • @johnnyjimj
    @johnnyjimj 9 หลายเดือนก่อน +1

    After seeing the difficulties you experienced while trying to remove the outer race I think I'll just put the hub back on and get a shop to do the job. My civic is "only" 20 years old but it lived all its life in the Salt Belt. It was already unbelievably difficult to remove the lower ball joint and I only realized it should have a dust shield after watching a few videos, because it's so rusted you can't even see where it used to be.

  • @joaobarbosa6392
    @joaobarbosa6392 2 ปีที่แล้ว

    Great video, great explanation, keep going brother like that helping a lot people out there 👍 😀 👏 😄

  • @ahsenabbasi4968
    @ahsenabbasi4968 2 ปีที่แล้ว +2

    @15:20 I ran into the same problem. I grabbed a hammer and an adapter that fit the inner race and just went for it until it was just the outer race stuck in the knuckle. There’s a lip sticks out in the middle of the bearing and I got the right sized adapter for that and kept hammering. Pb blaster helps too and once it starts sinking, add more adapters on top until you’re close. After that, I used the tool as intended to get the rest of it out and I was able to get the whole thing out of the knuckle.

  • @__Dja
    @__Dja ปีที่แล้ว +4

    Timken is definitely the best when it comes to replacing Honda wheel bearings

    • @dagorodriguez5265
      @dagorodriguez5265 3 หลายเดือนก่อน

      Do you know the part #? Or where to buy this for 1999 civic

  • @udedmario
    @udedmario 2 ปีที่แล้ว +1

    Great video, easy to follow and done with easily obtainable tools!

    • @CivicFiberglassDoor
      @CivicFiberglassDoor 10 หลายเดือนก่อน

      Agreed. Ive done 10+ Civic bearing jobs with this tool with no problem. I think an important factor is that I used clean high-pressure wheel bearing grease on the main screw threads, as well as between any surface that turns with friction, such as the screw and the face of the cups or washers.

  • @moe2398
    @moe2398 3 ปีที่แล้ว

    Thx man... you helped me out a lot with this!!!!

  • @brianamaya1809
    @brianamaya1809 4 หลายเดือนก่อน

    Super detailed with every step so helpful thank you i would be attempting this soon

  • @jw8560
    @jw8560 ปีที่แล้ว

    Great video! Well done!!

  • @Maplecook
    @Maplecook 11 หลายเดือนก่อน +1

    Awesome stuff, Spencer. Subbed!

  • @rodolfojimenez3989
    @rodolfojimenez3989 2 ปีที่แล้ว +2

    thank you good buddy you explain it perfectly!

  • @khimsophacarfixing
    @khimsophacarfixing 2 ปีที่แล้ว +1

    Thanks for your sharing knowledge!

  • @josebetancourt6555
    @josebetancourt6555 2 ปีที่แล้ว +2

    This video helped me a lot brother. Definitely subscribing 💪🙏

  • @johnnguyen2376
    @johnnguyen2376 ปีที่แล้ว

    Very well explained.Thank you .

  • @johnnyamador371
    @johnnyamador371 2 ปีที่แล้ว +3

    appreciate ya, ft.worth,TX

  • @nixmix3544
    @nixmix3544 ปีที่แล้ว

    Wow amazing Video! You’re very talented and well explained video. 🙏👏🏻 Thank You!

  • @mlez7197
    @mlez7197 ปีที่แล้ว

    Thank you SR..😮 😃 great explanation

  • @rayone23
    @rayone23 3 ปีที่แล้ว +1

    This video helped me out a lot thank you

  • @k20castro
    @k20castro 2 ปีที่แล้ว

    Nice snap ring pliers. I have some harbor freight ones they worked alright

  • @kumingo
    @kumingo 2 ปีที่แล้ว

    I had same issue w the same wheel bearing puller with the outer race of the bearing.

  • @jamesclifford2830
    @jamesclifford2830 2 ปีที่แล้ว +2

    I coincidentally have that same hub waiting to be put on lol

  • @dannysautorepair
    @dannysautorepair 2 ปีที่แล้ว

    Great video

  • @paulmacal8037
    @paulmacal8037 2 ปีที่แล้ว +1

    Ahhhhhhhhhhh finally man thank you

  • @abanimishra3246
    @abanimishra3246 หลายเดือนก่อน

    Good job sir❤❤

  • @djaric
    @djaric 10 หลายเดือนก่อน

    Glad I decided my wheel bearings were fine on my 97 civic. 😅 I already have enough work to do.. Also this car has clearly never seen snow or salt. mustbenice

  • @CurrentGenGamesWithNick
    @CurrentGenGamesWithNick ปีที่แล้ว

    I don't know how you did this man but job well done I bought it and I could not get my bearing in it would just not go in I gave it to Mavis the thing kept Titan it just kept loosening

  • @BoostedPastime
    @BoostedPastime ปีที่แล้ว

    Thank you!

  • @Seraphim401
    @Seraphim401 3 หลายเดือนก่อน

    Nice job bro.

  • @currenbeuchat4318
    @currenbeuchat4318 11 หลายเดือนก่อน

    I ran into the same problem today where the outer race was the only thing left inside of the knuckle… now I’m screwed. Gonna need some help from your dad now lol

  • @JAI45624
    @JAI45624 2 ปีที่แล้ว +1

    THANK YOU

  • @veesixtyfiverider6479
    @veesixtyfiverider6479 3 ปีที่แล้ว +2

    Good video. Good to see the mistakes as well. As for removing the bearing, do you think using the impact wrench contributed to the bearing getting destroyed on its way out? Had you continued to use hand tools, do you think you would've "felt" something off? Thanks!

    • @juggernaut6498
      @juggernaut6498 2 ปีที่แล้ว +2

      In my experience using power tools wouldn't have made a difference it just makes the job easier

    • @narseh123
      @narseh123 2 ปีที่แล้ว

      There is no way he could have removed the outer race using the tools at hand.

  • @mahdavimail
    @mahdavimail 3 หลายเดือนก่อน

    So the only way to take out the outer race is jack hammer?! Tnx for video

  • @michaelpiecewicz9748
    @michaelpiecewicz9748 2 ปีที่แล้ว

    Thinking that you don’t live in the rust belt!!!! So lucky are you

  • @rayclaudio4141
    @rayclaudio4141 7 หลายเดือนก่อน +1

    You're amazing

  • @thenet9537
    @thenet9537 2 ปีที่แล้ว

    What size is the bolt

  • @abdoualilahthomas8031
    @abdoualilahthomas8031 2 ปีที่แล้ว

    Great job, but you should have changed the lower balljoint with a honda one ( after market doesent take too long like for me 3 months and started making noise) also since it will be the same work taking the knuckle out the car.

    • @spencersgarage
      @spencersgarage  2 ปีที่แล้ว

      I actually refreshed the entire suspension two years ago with Honda OEM and Hardrace parts.

  • @rafaelo8498
    @rafaelo8498 2 ปีที่แล้ว

    The cover protect the brake padsand disk from dirt

  • @mg8718
    @mg8718 4 หลายเดือนก่อน

    You coulda used a cold steel chisel and hammer to get the rest of that stuck race out.

  • @David-fy3bi
    @David-fy3bi 11 หลายเดือนก่อน

    Not channel locks but snap ring pliers

  • @mistacdawg6882
    @mistacdawg6882 ปีที่แล้ว

    My putter race is stuck and both inner races came out with the hub, what tool can I use to get the putter race out?

    • @spencersgarage
      @spencersgarage  ปีที่แล้ว

      I ran into that difficulty as well. I explain how I removed the outer race in the video.

  • @irisbaez1972
    @irisbaez1972 2 ปีที่แล้ว

    Is it dangerous to re-use the front old hub? People recommend using a new one. Mine is free rust and 154 K miles only.

    • @MegaHomieJ
      @MegaHomieJ ปีที่แล้ว +1

      you may have found your answer already, but in case others are wondering the same question, reusing the hubs is completely safe as long as you are able to remove the wheel bearing without scoring the hub. you do not want to reuse wheel bearings if the hub is removed once before, this could lead to premature failure.

  • @lowkd5465
    @lowkd5465 2 ปีที่แล้ว

    What happend to the shields lol

  • @joeybuddy96
    @joeybuddy96 ปีที่แล้ว

    2:40 Ah, the outside inner race.

  • @JohnnieIsBored
    @JohnnieIsBored 2 ปีที่แล้ว

    I just pressed my bearing and now the inner bearing wobbles. Do you know if this is normal or not?

    • @spencersgarage
      @spencersgarage  2 ปีที่แล้ว +1

      Yes. The inner race may have about 1-2mm of movement. Excessive movement will mean the bearing is damaged though.

    • @JohnnieIsBored
      @JohnnieIsBored 2 ปีที่แล้ว +1

      @@spencersgarage does it matter which way bearing is facing? I have a non abs if that helps and only one side has the black facing.

  • @CurrentGenGamesWithNick
    @CurrentGenGamesWithNick ปีที่แล้ว

    put in freezer it easy ?

  • @steeezzyy801
    @steeezzyy801 ปีที่แล้ว

    20:56 bruh i pushed the hub using the spindle, no wonder it fucked up the bearing immediately 😭😭😭

  • @michaelpersson68
    @michaelpersson68 ปีที่แล้ว

    Amazon it was $64 us i think buy for Ford Transit connect 2011

  • @justinlangston8787
    @justinlangston8787 2 ปีที่แล้ว +1

    4:32 Giggity

  • @severocortez8082
    @severocortez8082 11 หลายเดือนก่อน

    Te falto poner la lámina

  • @dangda-ww7de
    @dangda-ww7de ปีที่แล้ว

    sure you did, you left off the dusk shield.

  • @naumsantana4670
    @naumsantana4670 หลายเดือนก่อน

    Cara muito maneiro!! Mas.. não entendi nada . Kkkkkk

  • @randyrobison335
    @randyrobison335 2 ปีที่แล้ว +1

    You never mentioned packing the bearings with grease in your video.

    • @spencersgarage
      @spencersgarage  2 ปีที่แล้ว

      They are closed bearings. No need.

    • @huyquoctran2088
      @huyquoctran2088 2 ปีที่แล้ว

      Most wheel bearing are closed sealed so no need to pack grease into the bearings