The vibrations are too much! I already balanced the crank but unfortunately I broke a piston ring. So you'll have to wait until I order another set of rings or another piston from Germany 😑
Bike sounds good i replace my magneto cdi and sparkplug today in my yd100 im pretty shure it was the mag but it came with the extras so i just used em i need to jet my carb i orderd some jets they should be here soon im just hoping its lean like im thinking it is and its not 4 stroking cause i got bigger jets and i cant seeme to find smaller then 70 jets for the red cover bofeng carb
Don't forget that you can adjust the needle height also. If it lean, lower the clip on the needle. That should help. I never liked the bofang carb. Rare jet size, constant leaking float and the engine always seemed to 4 stroke.
@@mybikes1970 good to know I have pretty much all of those problems its lean but not in the bottom end where the needle should effect it like I said in the other comment I got jets in the way in the mail so I'm hoping I can get it right if not I'll get a diffrent carb these motors are just super fun I'm so glad I found this hobby as much as I like rc cars their way more expensive
@@mybikes1970 unless ur buying special frames and wheels it's pretty inexpensive I found my mountain bike for free on the side of the road and I paid 120 for the kit on Amazon I have sence found kits on ebay for like 89$ with free shipping so I could built the whole bike for 89$ my chain was like 25$ but wanted a nicer 415 chain and I had a few problems with cdis and mags like we talked about but a mag with cdi and new spark plug is only 18$ I'm all into the bike like 200$ and it's great in gas I can make a gallon last a while
@@mybikes1970 cool I haven't post a video in a while the phone battery is acting up getting a new battery tomorrow so this is my other you tube phone.i got a yd100 on a homemade case reed testing and a rear zae50 crank 39mm stoke low hole piston to test soon hopefully I get to make great video like you bro safe ride when you're traveling
@@jeffwalters6044 32t on a piston port 380ms piston build by me phantom 85 cylinder and original phantom case and crank.never had any issues with my 85cc .I only trust Lucas oil in my engine for when I lose care of my brain and riding fast that's the only thing protecting the enteral parts 👍💯
The vibrations are much less now(smooth at 44mph) but I'm using the stock piston(with bushing) for now until I get new rings for the Stihl piston that was in it.
Hey brother Hope all is well with everything The bikes are looking and sounding great I like watching you rip around I was wondering are u in pr if so u ever run across that Eli’s dude in your travels ?
Thanks brother! Eli and I haven't meet up yet, but we plan to soon. I need something to try to keep up so I'm waiting for the minarelli hybrid engine to arrive 😁
Sounds awesome brother looks like version 4 with that cnc cooling head mine has the same problem get up around 42 and vibration I'll be watching
The vibrations are too much! I already balanced the crank but unfortunately I broke a piston ring. So you'll have to wait until I order another set of rings or another piston from Germany 😑
Dude, sounds excellent!!! Thanks for the ride along, keep it safe as always! 👍
Dude, thanks for watching and stay tuned for the next ride 😁🚲💨
Thanks for the ride along motor sounds good to me would be a great cruising motor
Thanks! Most of the time that's all I do with the motor.... cruise 😁🚲💨
Nice ride bike runs 🦾🦾
Thanks brother! It's coming along 👍🏾
Another amazing ride! Good to see someone taking care and riding the phantom the right way. Thanks for showing the top speed. 👊🏻😎💥💥
That phantom gave me so many problems, I was always afraid to push it too hard, but now I understand how to ride it without breaking it 🙏🏾😁👊🏾
Sounding good bro good video 💥🦾⚙️💨
Thanks bro 👍🏾 I'm trying 😁🚲💨
Loving the truck
Next time let Laylay ride in it too 😁
Looks fast enough to get away from Strays….
One jumped out at me today 🐩👀
Bike sounds good i replace my magneto cdi and sparkplug today in my yd100 im pretty shure it was the mag but it came with the extras so i just used em i need to jet my carb i orderd some jets they should be here soon im just hoping its lean like im thinking it is and its not 4 stroking cause i got bigger jets and i cant seeme to find smaller then 70 jets for the red cover bofeng carb
Don't forget that you can adjust the needle height also. If it lean, lower the clip on the needle. That should help. I never liked the bofang carb. Rare jet size, constant leaking float and the engine always seemed to 4 stroke.
@@mybikes1970 good to know I have pretty much all of those problems its lean but not in the bottom end where the needle should effect it like I said in the other comment I got jets in the way in the mail so I'm hoping I can get it right if not I'll get a diffrent carb these motors are just super fun I'm so glad I found this hobby as much as I like rc cars their way more expensive
@@theLyzhendricks it’s an inexpensive hobby that can become expensive quick! It depends on what you want from these bikes.
@@mybikes1970 unless ur buying special frames and wheels it's pretty inexpensive I found my mountain bike for free on the side of the road and I paid 120 for the kit on Amazon I have sence found kits on ebay for like 89$ with free shipping so I could built the whole bike for 89$ my chain was like 25$ but wanted a nicer 415 chain and I had a few problems with cdis and mags like we talked about but a mag with cdi and new spark plug is only 18$ I'm all into the bike like 200$ and it's great in gas I can make a gallon last a while
I hope you like the 32t sprocket on your 85cc cause I really like mine never have to peddle going up hills
I like it but I still prefer the 40t for the hills 🚵🏽♂️ 😁👍🏾🇦🇬🇵🇷
@@mybikes1970 cool I haven't post a video in a while the phone battery is acting up getting a new battery tomorrow so this is my other you tube phone.i got a yd100 on a homemade case reed testing and a rear zae50 crank 39mm stoke low hole piston to test soon hopefully I get to make great video like you bro safe ride when you're traveling
@@Antiguaandbarbuda26884 Thanks brother! I can't wait to see your build when you get the battery for the camera 👍🏾🚲💨💨💨
What pipe u got on ur phantom
@@jeffwalters6044 32t on a piston port 380ms piston build by me phantom 85 cylinder and original phantom case and crank.never had any issues with my 85cc .I only trust Lucas oil in my engine for when I lose care of my brain and riding fast that's the only thing protecting the enteral parts 👍💯
Sounds good bro
Thanks bro 👍🏾
@@mybikes1970 Yw bro
Sounding all pro and spiffy. How's them vibrations going? Thanks for the ride.
The vibrations are much less now(smooth at 44mph) but I'm using the stock piston(with bushing) for now until I get new rings for the Stihl piston that was in it.
@@mybikes1970 Sounds like a project. Yup, I hear you; I gotta open mine dailer too, something is messed, lol. Fun fun fun.
Great ride! She sounds dialed in. Love the surroundings of your country. Where do you live again?
It was dialed in but now it's leaking from the case 😞 lol! I'm in Puerto Rico 🇵🇷👍🏾
@@mybikes1970 I see, why the leak? Gasket?
@@jmrides777 Yes,just the gasket. I'll take it apart on the weekend 🔧
The new version of the phantom doesnt come with a balanced crank?
That's the p85 v.1 that I have(v1.3). I'm not sure if the newest version has a balanced crank.
It does
Hey brother
Hope all is well with everything
The bikes are looking and sounding great I like watching you rip around I was wondering are u in pr if so u ever run across that Eli’s dude in your travels ?
Thanks brother! Eli and I haven't meet up yet, but we plan to soon. I need something to try to keep up so I'm waiting for the minarelli hybrid engine to arrive 😁
What pipe u running and ya they vibrate like a mfr compared to my minerallis lol
I'm using the "Angry Jack" mz65 clone. I just balanced the crank and hopefully some of the vibration goes away 👍🏾
@@mybikes1970 nasty jacks alright nothing like a real pipe lol
@@jeffwalters6044 "nasty jack" lol thanks and I will upgrade the pipe for that engine soon 👍🏾
😁👽👍 I think you would have meet your mark if you had layed down 🚴💥☁️☁️☁️☁️
I did lay down when I was chasing the car and to my surprise, it actually went faster 🚲💨💨💨💨💨👀😁
@@mybikes1970 on the first pull, it sounded Nice👽👍
@@Op1zilla I just let it rip 😁🚲💨💨💨
🇺🇲👍🇵🇷
😁👍🏾🇵🇷
Are those?
My Bikes stickers on the way ?
If so . . .
Can't wait !
@@rubentrevino2372 Give me an address and I'll send you one 👍🏾✉️