The only thing better than 8" are 10" wheels. My favorite size is 130/90-10. It will give a little bit of floatation in the sand without being massive. There are many choices available for cheap like Shinko and it is just a matter if you can make it fit on the bike.
A small challenge for the new year! As the Black Knight would say "tis but a flesh wound" the bike should handle better with those new rims and treads. Can't wait to see the fix 😎
oh no my bad u do have the spinners the astro only come in 6inch theres those the ones we got and then the tri stars the 6inch astro is 60 sumtin bucks and are 8inch spinners are cheaper then the 6inch astros idk thats wat it iz tho stay strong willy we got this
@@DIYWilly oh my wheel came with the bearings and 5/8 axel from omb idk just waiting for my shinko bout to watch your new vid hold up just got the bell
@@DIYWilly waitin on the shinko street tire i have everything else but one side i used oven cleaner and it blued it so i have to get it plated smh im a dum kid
any tubes u think i should use for my shinko white wall i got coming in shortly its gonna make my bike look way chunkier i want the tractor grip tires for the mud but i gotta say the 8inch wheels dont have alot of choices basically gotta get the 10inch scooter or pocket bike wheels for good tire selection idk good build tho man i love the chunky look it got just chilling there all mean lookin
First off… HAPPY BIRTHDAY my friend Second congrats on the new phone and I look forward to a video on that new bike. That will be very interesting to watch.
There pretty cool. I’ll see how they ride. I ordered parts for the brakes from GPS but shipping is slow right now. Probably revisit the install of wheels when those parts arrive.
That sucks Willy I wanted to add that LR201NPP 12x35x10 sealed track bearings is the part number to run stock axle for anyone that don't want to chance what happened it happens to the best of us
Wow that’s the bearing I need to keep the 12mm axle? Oh man I wish I knew that earlier… I tried to find a bearing that would work but never found what I was looking for. We all have the part number now. Should have asked before drilling the holes. I’m going to put the part number in the description. Thanks man!!
@@DIYWilly your welcome and I need to give credit were ots due ErikD 804 TH-cam taught me about this about a year ago super smart guy build a awesome stretch db30
@@DIYWilly didnt buy it yet just tryna figure out because omb has the sprockets on the wheel already and three diff type of bearings to go with i just want your setup so i guess ill just get it from gPs
@@DIYWilly blue steel finish them like a old smith n wesson revolver lol i love the blued black look i waNNA DO A RUSTY DUSTY LOOKIN BUILD BUT CLEAR COAT IT AND MAKE IT NOT TARNISH
Hello RobO, If your referring to the wheel spacers I purchased them from OMBwarehouse. I use 5/8” axles and this spacer cut down as needed. www.ombwarehouse.com/steel-axle-bushing-5-8-x-2-1-2-az8369.html Thanks for watching!!
@robo6733 hub…www.ombwarehouse.com/4_5-brake-drum-with-flange-id.html Adapter…www.ombwarehouse.com/billet-sprocket-adapter-black.html Unfortunately their sold out of the adapters but you can find it on Amazon or GPS.
The only thing better than 8" are 10" wheels. My favorite size is 130/90-10. It will give a little bit of floatation in the sand without being massive. There are many choices available for cheap like Shinko and it is just a matter if you can make it fit on the bike.
So far i think the 10” wheels were easier to work with.
A small challenge for the new year! As the Black Knight would say "tis but a flesh wound" the bike should handle better with those new rims and treads. Can't wait to see the fix 😎
Thank you working on it
Ahhhh I'm almost home and keep losing the feed!!!!!
I was watching the video right now and heard a music track I thought I removed during editing but it’s still there. The problems of editing quickly….🙄
@@DIYWilly I ruined enough videos that I just don't turn the music on. If I do something I'm not recording I jam right out.
Lol my neighbors horses are impressed most of those days.
@@fatbuddycat I added music to the video and changed my mind about the song and somehow left part of it in the video.. Oh well
oh no my bad u do have the spinners the astro only come in 6inch theres those the ones we got and then the tri stars the 6inch astro is 60 sumtin bucks and are 8inch spinners are cheaper then the 6inch astros idk thats wat it iz tho stay strong willy we got this
Yep we got this!!
@@DIYWilly hells yea if u look on the inside of these wheels theres some info max psi and max tire width u can run a 4.80 wide tire on these bad boys
i took the whistles out of a nerf ball and put them on my turn stops and thats why my bike has a whistling noise as im cruizing down the block lol
so yea i just realized the wheel i ordered is the spinner not the astro smh it almost looks the same im kinda mad i cant lie but im learning
why did u swap out the bearings again bud
If I remember right I just swap for the 5/8 axle and better quality bearings.
@@DIYWilly oh my wheel came with the bearings and 5/8 axel from omb idk just waiting for my shinko bout to watch your new vid hold up just got the bell
@@AnGryCruizer let’s see the new wheels and tires
@@DIYWilly waitin on the shinko street tire i have everything else but one side i used oven cleaner and it blued it so i have to get it plated smh im a dum kid
any tubes u think i should use for my shinko white wall i got coming in shortly its gonna make my bike look way chunkier i want the tractor grip tires for the mud but i gotta say the 8inch wheels dont have alot of choices basically gotta get the 10inch scooter or pocket bike wheels for good tire selection idk good build tho man i love the chunky look it got just chilling there all mean lookin
What the tire size. Match the tube
@@DIYWilly ok thanks man its for the 8inch wheel u have dude lol the shinko is 8x3.50 or 8x4.00
Lovin it man!!
Thanks been working through some problems with the install but I’ll get it all figured out.
Yep.. got a motorized bike kit for Xmas and today's my bday... Got a new better phone long vids coming soon!!
First off… HAPPY BIRTHDAY my friend
Second congrats on the new phone and I look forward to a video on that new bike. That will be very interesting to watch.
Thanks! Sometime when it gets warm il post again.. 6° outside rn
Hope it warms up soon. 67 here in SoCal.
I had my fork like that for a long time. I think I attached the number plate somehow and just didn't look at it.
Exactly the number plate wouldn’t bolt to the top and I didn’t see why until now..😬
Those tires 😍
There pretty cool. I’ll see how they ride. I ordered parts for the brakes from GPS but shipping is slow right now. Probably revisit the install of wheels when those parts arrive.
That sucks Willy I wanted to add that LR201NPP 12x35x10 sealed track bearings is the part number to run stock axle for anyone that don't want to chance what happened it happens to the best of us
Wow that’s the bearing I need to keep the 12mm axle? Oh man I wish I knew that earlier… I tried to find a bearing that would work but never found what I was looking for. We all have the part number now. Should have asked before drilling the holes. I’m going to put the part number in the description. Thanks man!!
@@DIYWilly your welcome and I need to give credit were ots due ErikD 804 TH-cam taught me about this about a year ago super smart guy build a awesome stretch db30
dont know which one to buy the tapered bearing sealed or standard ???
What axle do you use. I have standard not tapered. But I also use the 5/8 axle.
@@DIYWilly didnt buy it yet just tryna figure out because omb has the sprockets on the wheel already and three diff type of bearings to go with i just want your setup so i guess ill just get it from gPs
@@DIYWilly they have a sealed bearing one too
12mm or 5/8 axle?
@@DIYWilly 5.8 then 3.4
chrome dunk those spacers then clear coat lol thats what im gonna do or blate them
I was planning on painting them black.
@@DIYWilly blue steel finish them like a old smith n wesson revolver lol i love the blued black look i waNNA DO A RUSTY DUSTY LOOKIN BUILD BUT CLEAR COAT IT AND MAKE IT NOT TARNISH
@@DIYWilly THIS KID IS CRAZY LMAO
The blue steel finish is a good idea
@@DIYWilly RIGHT ON MAN!!!! i tryto do wat i can do wen i can do
Where did you get the wheels ?
How’s it going man? I bought the wheels from OMB Warehouse but GoPowerSports also has them. Thanks for watching
No problem man your videos teaches me a lot on my Mega Moto 80
Thank you I appreciate that…
Where you get thos spacers?
Hello RobO, If your referring to the wheel spacers I purchased them from OMBwarehouse. I use 5/8” axles and this spacer cut down as needed. www.ombwarehouse.com/steel-axle-bushing-5-8-x-2-1-2-az8369.html
Thanks for watching!!
Thank you, I was speaking of the spacer you have for the sprocket and the brake rotor.
@robo6733 hub…www.ombwarehouse.com/4_5-brake-drum-with-flange-id.html
Adapter…www.ombwarehouse.com/billet-sprocket-adapter-black.html
Unfortunately their sold out of the adapters but you can find it on Amazon or GPS.