Thanks again I learned that a wrench will do the trick and that the fill plug is towards the back on the passenger side. I learned on other videos if you don't change the filter and just do a drain and fill you need to measure the amount that comes out and then put the same amount back in run the truck and undo the allen head bolt and let any excess drain out so it levels out to where it needs to be. I'm watching about 10 different videos so I come up with a complete picture before I start
I would not do what he did, you have to check the fluid level by running the temperature check before call it done. Also use Toyota brand fluid type recommended by your manual. Otherwise you might screw your transmission.
Thanks again I learned that a wrench will do the trick and that the fill plug is towards the back on the passenger side. I learned on other videos if you don't change the filter and just do a drain and fill you need to measure the amount that comes out and then put the same amount back in run the truck and undo the allen head bolt and let any excess drain out so it levels out to where it needs to be. I'm watching about 10 different videos so I come up with a complete picture before I start
Thanks for the video that's great man I have the same exact truck and the same green jack! 😅👍
@@Bluegastank No problem man!!
Great info, man. Thank you!
@@Survival1 you’re welcome 🙏🏾
Very informative. Great job. Thanks for sharing
@@jacinthbailey3163 Thank you ! Stay tuned for more
Thanks Bro u were very helpful
@@Yasuke9999 No problem bro!
I would not do what he did, you have to check the fluid level by running the temperature check before call it done. Also use Toyota brand fluid type recommended by your manual. Otherwise you might screw your transmission.