For workability when applying decals just use a spray bottle with a mixture of baby shampoo and a cap full of isopropyl alcohol...This will allow you to lay the whole decal down and slide it perfectly into place before you squeegee the air bubbles out from underneath the decal..If by chance you ever have a small air bubble pop it with a needle and squeegee it down with a hard plastic like the corner of a credit card...Great Job Guys...Love It...
Very nice floor! How thick is the green layer and how thick is the transparent layer that you rolled over the stickers? What is the minimum thickness of each layer?
The red zone traffic scuff marks play really pulled through and made that area look like a blitz play cane through. The colors looked so precise, hell of a awesome bare concrete floor transformation.
When applying the lighter shade of green to the darker base coat of green did you happen to leave anytime for the epoxy to cure? Or did you just apply your swirl technique immediately after laying down the darker base coat?
Once you apply your base coat of epoxy you immediately fallow it up with the highlight color so you have time to work with the base coat of epoxy. Thanks
Thank you for the good video. By the way, I know that sheet paper cannot be adhered to with epoxy, but does the construction work well? Is the logo material other than sheet paper?
That floor is the so cool. You did such a great job showing how it is done. I would love to have that done in my sports room. Have the room is Nebraska Cornhuskers and the other side is Jacksonville Jaguars.
I really want to do this to my floor but with black epoxy and Pittsburgh penguin decal. Problem is that they painted the floor with gray paint. When I close on the house I’ll finally have a floor to epoxy. What’s the easiest way to remove the paint? Paint remover? Or is there an easier way?
I LOVE IT!!!!! I want to epoxy my garage floor now!! I have a long way to go before I get to the floor. I just started redoing my garage today and I am doing it by myself so it will take some time. It needs alot of work. But great job I love it!!
Leggari Products i cant find anything like this on amazon. I ordered a kit from Leggari but i cant start it until i find the decals. Did anyone ever find a site that could help us all with our dream floor projects?
@@LeggariProducts WONDERFUL and incredibly amazing floors. Please how do I get leggari products since they are not on Amazon. I want some for my church floor
Hi my name is Aj Garcia and I will be doing the exact same flooring that you did in this video and I was wondering what kind of logos are those that you are putting down and do they have to be perforated vinyl or could you just buy some stickers and put them on??
Wow, how awesome is that! I'm from Cleveland and my family are all diehard sports fans. Lol all these ideas are coming to mind! Shared with my sister and son. Cuz they would love this!
I’ve tried doing this myself & came across a few problems & some are within this video. I see that there’s holes in the floor after you’ve used the sanding machine. How do you fill them holes ? And my other problem was not getting that desired glass like finish, how do you get rid of the blemishes & the little spots that sit on top? I see those are on this floor too. Your help would be appreciated. Thanks
Justin Alvizo it’s similar to tile when wet. If that’s a concern we recommend our WB Urethane Top Coat with our grit additive to help with slip resistance. Thanks
I have so many questions as to what size is the field? How much epoxy did you use? What website did you purchase the decals? Final question how much would you charge for this type of job? Thank you in advance for your time
Hello! We currently do not provide this service but feel free to contact our customer service to check if there is a contractor familiar with out products near you! 1-844-LEGGARI (534-4274) customerservice@leggari.com
Neat project, thanks for sharing! Ever seen those vinyl 3-D optical illusion decals advertised on FB, like where there's a shark coming out of a bathroom floor type thing, where decal is cut to fit entire floor area? I was looking at them and wondering if your epoxy would make it possible to do that with professional results..?
We have 3 different top coat options. Glaze coat is our super high gloss top coat that lays out glass smooth just like the metallic epoxy coat. Our WB Urethane comes in high gloss and leaves a minor texture and we also have a WB Urethane that’s a Matte/Satin finish.
Yes you need to prep the surface depending on what the surface is. Take a look at our brochure to see the different prep work involved. Thanks online.flippingbook.com/view/364043
This was about 135 sq. ft. You can actually order or price out a custom kit for that exact square footage through the Floors section of our website at www.leggari.com. Simply click on Floors >>>> Order Floor Kit Here, then follow the steps.
We might be able to get you in contact wit ha contractor in your area, Email customerservice@leggari.com They will be able to help you with your questions!
I really love it. Looks amazing. I don't know anything about this so I have several questions. Say I did that to my floor then decided to move can it be removed from the floor or is it permanent? Could you paint over it and would the paint stick well? If I did that in my basement and it flooded would that ruin it? Would it get moldy in a basement? Will it start peeling up after time
What about dust and bubbles it’s hard to tell from the video but if you close up you always see usually some dust maybe a little bubbles if not how do you fix it
Our product itself is formulated so that the bubbles pop themselves while the product is fluid. However if you overwork the product too late in the curing process, you will be putting air into it and it will be too thick to release it. Also if you are working with porous surfaces or substrates like concrete, you could get them from moisture or outgassing issues from vapor emissions. If you have any bubbles, you just spray denatured alcohol out of a hand sprayer at a fine mist to dissipate the bubbles. (Do this immediately after coating with epoxy, and then no later than 20 minutes after application.)
I love leggaris tutorials ,especially the really recent stuff,I’m in the uk so not into the nfl like you guys,but those fish eyes are plentiful 👁👁,I’m typing this half way through the video so will watch and see what the outcome is.your resin always looks a thick consistency,I use a company here in the uk but it’s not as thick as this and seem to lose my design a lot .Amazing channel though.
You can actually order or price out a custom kit for that exact square footage through the Floors section of our website at www.leggari.com. Simply click on Floors >>>> Order Floor Kit Here then the link order floor kit, then follow the steps.
Love it! The Chiefs just won the Super Bowl! Would be great to see one with Chiefs and 49ers. Also would like to see one with the yard lines across the field included.
For workability when applying decals just use a spray bottle with a mixture of baby shampoo and a cap full of isopropyl alcohol...This will allow you to lay the whole decal down and slide it perfectly into place before you squeegee the air bubbles out from underneath the decal..If by chance you ever have a small air bubble pop it with a needle and squeegee it down with a hard plastic like the corner of a credit card...Great Job Guys...Love It...
Oh Man, that's floor is so cool love have one done in my Bears man cave.
Your product is remarkable...so clear and crisp.... amazing how it self levels...I can't wait to use it...
Great video! It inspires confidence in the work you do!
How long do you wait after the metallic coat is down before applying the vinyl logos ? Does it need to cure 72 hrs before applying?
Absolutely breathtakingly amazing!!!!!
So awesome! Not really a football fan but I would have this just for how awesome it looks! Great job
How do you handle a garage floor sloped to a drain in the center of each bay? This video was great.
Make sure you tape off the drains really good then diamond grind the floor and clean it really good then you are ready to apply our epoxy. Thanks
This sign guy approves this message. Start squeezing from the center out. Love the vids. Keep em coming
Thanks for the approval, and thanks for watching the video
I could watch these videos all day! Amazing job guy's!
I am addicted to your videos. This is so, so good. Beautiful 👏🏼😍
Thanks Alex, we are glad you enjoy the videos.
online.flippingbook.com/view/364043
Great work! I am learning how to progress with decorative concrete/epoxy floors this really helped! Is the flood coat poly eurothane?
Very nice floor! How thick is the green layer and how thick is the transparent layer that you rolled over the stickers? What is the minimum thickness of each layer?
The red zone traffic scuff marks play really pulled through and made that area look like a blitz play cane through. The colors looked so precise, hell of a awesome bare concrete floor transformation.
Thanks for the comment and for watching the video. It was a fun floor to do
When applying the lighter shade of green to the darker base coat of green did you happen to leave anytime for the epoxy to cure? Or did you just apply your swirl technique immediately after laying down the darker base coat?
Once you apply your base coat of epoxy you immediately fallow it up with the highlight color so you have time to work with the base coat of epoxy. Thanks
Wow! NFL must be honored and flattered at the same time! Stunning! My man would love to have this in his man cave! 🤗
Team colors in the end zones could look really cool. Blue base coat and gold highlights for the Rams, for example.
❤️🙏 thanks for all your hard work and sharing with us how to do it❣️
U guys r awesome and thank you for this video I’m going to have fun thinking of what I’m going to do with my shop and garage floors
Thank you!
Thank you for the good video.
By the way, I know that sheet paper cannot be adhered to with epoxy, but does the construction work well?
Is the logo material other than sheet paper?
Wow, just beautiful. Well done.
Excellent tutorials, I really appreciate the amount of detail explanation. Tks.
That floor is the so cool. You did such a great job showing how it is done. I would love to have that done in my sports room. Have the room is Nebraska Cornhuskers and the other side is Jacksonville Jaguars.
Excellent. Great idea vs. carpet or hardwood. I would definitely be ok with this for my husband do this.
I really want to do this to my floor but with black epoxy and Pittsburgh penguin decal. Problem is that they painted the floor with gray paint. When I close on the house I’ll finally have a floor to epoxy. What’s the easiest way to remove the paint? Paint remover? Or is there an easier way?
I LOVE IT!!!!! I want to epoxy my garage floor now!! I have a long way to go before I get to the floor. I just started redoing my garage today and I am doing it by myself so it will take some time. It needs alot of work. But great job I love it!!
How do you minimize or completely rid bubbles in final coat of epoxy?
3 days and 2.4 million views!!!! Congrats!!! Awesome job guys.
Thanks for watching the video
Where exactly did you guys go for the decals, this is something I want to definitely do for my Rams
We ordered our off of Amazon on a decal site. Thanks
Can I have the size and name of the company off amazon? I am doing a Giant's/panthet floor 😊
@@monicaevery7136 Did you ever get the link? I've been unable to find anything like it on amazon and the stuff on etsy is junk.
I never got the link 😭 monicaevery94@gmail.com if you can send that way 😊
Leggari Products i cant find anything like this on amazon. I ordered a kit from Leggari but i cant start it until i find the decals. Did anyone ever find a site that could help us all with our dream floor projects?
Once the floor gets a lot of where and Tar on it What do you do to bring the floor back to life again ?
Beautiful working
Does the decal come up over time with the hot tires constantly going over decal?
Oakland Raiders. Floor looks magnificent! You guys do one hell of a job!
Thanks Gregory for the comment and for watching the video
@@LeggariProducts WONDERFUL and incredibly amazing floors. Please how do I get leggari products since they are not on Amazon.
I want some for my church floor
That green is sick looking..
Thanks for commenting on the video
Will this floor hold up to garage use??
Hi my name is Aj Garcia and I will be doing the exact same flooring that you did in this video and I was wondering what kind of logos are those that you are putting down and do they have to be perforated vinyl or could you just buy some stickers and put them on??
is the highlight green applied after the basecoat green is completely dry?
No they are applied together. First the Moss Green Base Coat, then immediately add the Bright Green Highlights and swirl. Thanks
What kind of roller did you use at the end???
Wonderful Job really nice I like it, congratulations
Wow, how awesome is that! I'm from Cleveland and my family are all diehard sports fans. Lol all these ideas are coming to mind! Shared with my sister and son. Cuz they would love this!
Ravens baby!!
Do you let your mix pint breath after mixed and for how long??
what is the last product applied after everything.. also could i order the items if am abroad
Francis Okufi that was our Metallic Epoxy (clear) without any Metallics added to it. Thanks
is that slipper if you have water or snow on your shoes when walking on it?
Can u please describe how to mix that green colour.... And what is the colour
I’ve tried doing this myself & came across a few problems & some are within this video.
I see that there’s holes in the floor after you’ve used the sanding machine. How do you fill them holes ?
And my other problem was not getting that desired glass like finish, how do you get rid of the blemishes & the little spots that sit on top? I see those are on this floor too. Your help would be appreciated. Thanks
How do you completely rid or minimize bubbles in final stages of top coats?
Not sure if anyone’s asked yet, but is it slippery if it gets wet? Like if we did this to our garage and we had a gym in there.
Justin Alvizo it’s similar to tile when wet. If that’s a concern we recommend our WB Urethane Top Coat with our grit additive to help with slip resistance. Thanks
Good Question?
This kind of floor when is wet with water is very slippery?? , I'm planing to this epoxy in the bathroom, thank you
I have so many questions as to what size is the field? How much epoxy did you use? What website did you purchase the decals? Final question how much would you charge for this type of job? Thank you in advance for your time
Hello! We currently do not provide this service but feel free to contact our customer service to check if there is a contractor familiar with out products near you!
1-844-LEGGARI (534-4274)
customerservice@leggari.com
How much time did you wait between dark green until the bright green was put down?
Once you apply your base coat you immediately fallow it up with the highlights. Thanks
Does epoxy coating appliable for outdoor floor where sun exposure is unavoidable
Neat project, thanks for sharing!
Ever seen those vinyl 3-D optical illusion decals advertised on FB, like where there's a shark coming out of a bathroom floor type thing, where decal is cut to fit entire floor area? I was looking at them and wondering if your epoxy would make it possible to do that with professional results..?
Those are also epoxy floors. There's a company in Dubai that specializes in them (& walls & ceilings & garages). They're on Pinterest.
What grit sand paper are you using
May I know boss.. What use of isopropyl alcohol 92% and can I use hand sanitizers for that purpose
this looks great ! can you sit chairs , tables and other things on top of something like this or would it crack and scratch easy?
Once it is fully cured you can put any furniture over the top of it.
I want this color in my game room. But I'm removing carpet. How do you prep a floor for this?
Thank you it's so beautiful
Hello my friends, always a great job of yours. I would like to know, for flooring how long after we can take the tape in the footer
You can remove the tape the next day. Thanks
What did you guys go with for your topcoat TIA?
We have 3 different top coat options. Glaze coat is our super high gloss top coat that lays out glass smooth just like the metallic epoxy coat. Our WB Urethane comes in high gloss and leaves a minor texture and we also have a WB Urethane that’s a Matte/Satin finish.
what do you prime the floor with?
moisture vapor barrier?
I’d love to see a Dallas Cowboys one
We will add that to our list of video in the future. Thanks
@Alden Buyer that would be communism - stepping on America's team.
How long do you have to wait before putting the decals on. Also should you sand the entire floor before the flood coat?
Yes you need to prep the surface depending on what the surface is. Take a look at our brochure to see the different prep work involved. Thanks
online.flippingbook.com/view/364043
30:56 amazing work🎉
what is the cost about for something like this .....awesome job
What was the square footage for that floor and what was cost for material for that job
Or what is the cost for material per square for.
This was about 135 sq. ft. You can actually order or price out a custom kit for that exact square footage through the Floors section of our website at www.leggari.com. Simply click on Floors >>>> Order Floor Kit Here, then follow the steps.
Awesome...I going to redo my concrete floors.
How long is an epoxy pour supposed to last if done right?
Where can I buy your product
Great floor. Btw, what do you do about all the air bubbles? Do they automatically come out as
a result of the top coat?
Omg 😳😳 woow amazing 😍🥰 , How much does cost to do some amazing work like that , the price is for square foot 🦶👣 or for a whole area ???
We might be able to get you in contact wit ha contractor in your area, Email customerservice@leggari.com They will be able to help you with your questions!
Don't you need torching? I see all other products they apply torch on it. What is the difference between torching and not?
I really love it. Looks amazing. I don't know anything about this so I have several questions. Say I did that to my floor then decided to move can it be removed from the floor or is it permanent? Could you paint over it and would the paint stick well? If I did that in my basement and it flooded would that ruin it? Would it get moldy in a basement? Will it start peeling up after time
Once you apply this product it will be permanent. Once it is fully sealed it will be water proof.
online.flippingbook.com/view/364043
What about dust and bubbles it’s hard to tell from the video but if you close up you always see usually some dust maybe a little bubbles if not how do you fix it
Is there something special on the bottoms of your shoes or not
You didn't put a link to where you got the decals? Also how much does this cost in materials?
You can email leggari@gmail.com and they can help you with the decals and the price of the kit. Thanks
Is that black paint or black epoxy
How are you getting the bubbles out of the resin?
Our product itself is formulated so that the bubbles pop themselves while the product is fluid.
However if you overwork the product too late in the curing process, you will be putting air into it and it will be too thick to release it. Also if you are working with porous surfaces or substrates like concrete, you could get them from moisture or outgassing issues from vapor emissions.
If you have any bubbles, you just spray denatured alcohol out of a hand sprayer at a fine mist to dissipate the bubbles. (Do this immediately after coating with epoxy, and then no later than 20 minutes after application.)
Torching it is better. Especially on kitchen counters. It's not good to put chemicals on a food surface.
Explain to me. Doesnt this stuff gets sticky and gets alover your shoes and why you dont leave foot prints while aplting spreading. The stuff .plz
You have to have cleat shoes on.
@@jasonescobedo3814 ok thax a detail i didnt noticed
Cavs/Browns fan....Cleveland for life
Dog pound for life. Thanks for watching the video
Have you done a golf hole yet? Tee, Fairway, Green.I would love to start with that in my laundry room / walk-in closet.
Oops! Forgot bunkers and water.
I'm guessing vinyl would be the answer, but I would like for those features to Glow.
No we have not tried that yet but that is a great idea
Man, that floor makes me want to RUN THE DAMN BALL
I would love to see y'all do a baseball field (Texas Rangers)
Very nice. A floor for Super Bowl 50 would be a good one . That was Peyton Manning's last game . keep on keeping on and thanks.
this is awesome... i do same epoxy flooring in sri lanka but its getting yellowish. please some one con help me
How much gallon of metallic did you use
How can you walk on the resin while it is effectively wet?? And there is no footprints??
Because we used spiked cleats so we do not get the epoxy everywhere. Thanks
@@LeggariProducts - Ah. Thank you.
Awesome Job, incredible .
What shoes have you got on , football boots, cause I can’t see any footprints
He is wearing baseball cleats so he does not track the epoxy around. Thanks
Thanks for getting back to me, your work is incredible
Good morning and I was curious as to what website you purchased the NFL decal Stickers from? Thumps up on an awesome project.
You can order them from leggari@gmail.com they just need to know your dimensions. Thanks
In the video, they said u can get them from any company that makes automotive decals or body wraps.
What specific kind of roller are you using?
We are using 3/8 inch nap rollers from Home Depot. Thanks
I love leggaris tutorials ,especially the really recent stuff,I’m in the uk so not into the nfl like you guys,but those fish eyes are plentiful 👁👁,I’m typing this half way through the video so will watch and see what the outcome is.your resin always looks a thick consistency,I use a company here in the uk but it’s not as thick as this and seem to lose my design a lot .Amazing channel though.
What do you use for primer?
It’s our WB Primer. Thanks
How slippery is the floor when it's wet and dry?
Any floor will be slippery when wet, as far as when it is dry it is just like walking on tile. Thanks
Amazing work! Where are you located?
Thank you! We're located in Washington State but we ship all over the world!
lets say i have a space this big as you do here with the footballfield, aprox how much would it cost me in just material?`
You can actually order or price out a custom kit for that exact square footage through the Floors section of our website at www.leggari.com. Simply click on Floors >>>> Order Floor Kit Here then the link order floor kit, then follow the steps.
Sweet!!!! Will any primer work with your products?!
Our primer is a water based epoxy specifically designed to chemically bond to almost all smooth surfaces. Thanks
Could you do a few Dolphins in the sea ? I love Dolphins lol. Love this football field you made .
Earlene Brillon
I'll like to see that myself, because I'm doing that to my basement
Awesome absolutely beautiful
Thank you very much!
Do you supply the team logo?
We do not. All of the epoxy products needed can be found here 👉 leggari.com
Love it! The Chiefs just won the Super Bowl! Would be great to see one with Chiefs and 49ers. Also would like to see one with the yard lines across the field included.
We have had customers that have done the whole field with the yard lines not just the yard markers.
What would this cost to do Falcons vs Saints NFC Championship on a 24x21 slab