Looking at the state of that flange I can't believe the customer would put that back in after such a major overhaul. He's already paying for the labor so how much is a new carbon seal and flange? He better install a bilge pump because he is going to have a leaky boat.
I definitely appreciate your videos; thank you for the excellent education you are giving us. Every video is increasing my knowledge of my machine. The one where you took the top off a suspension model was especially helpful as I have a 2014 RXT-X aS 260.
Ok where are you located? I have 2 2005 GTX 185 sc that are driving me crazy. One has a new motor took it out for the fist time and its alarm and check engine came on. The other has water in the oil now . First time out this year also. They say it most likely the oil cooler. I'm replacing that this week. But I need a mechanic that can work on them and not charge me an arm and a leg. Let me know your location. I'm in Port Charlotte
Good Video - I liked your good & positive attitude towards it all. At least you know they’ll be back for a carbon seal/driveshaft in the future. I have this same model & was surprised to see all the holes in a fresh new hull. You know there are holes for things but just more than I would have thought.
Great Video! I own one of these skis which I do some videos with on my channel. Haven't had any issues, but nice to see how easy you make it look. Moving the engine and carbon seal are what would make me think twice about tackling the repair myself. I'd be interested to see more details on that. Subscribed!
Just had a 2022 GTI se 170 involved in a 2 ski wreck. Atleast a foot & a half from the Front of hull was knocked off.😩 The ski sunk with speakers still visible. I don’t know if the motor is screwed or not but I’d like to converse with you from seeing your video. Help needed…
You should mention that lower the IBR before you take the hill apart. I'm there now and trying to figure out how to lower the IBR to be able to remove the jet pump
The SE Models whether 130 or 170 come with some added features like a reboarding swim ladder, the adjustable trim settings, low speed & cruise control. Go to the Sea Doo website for all the differences. I personally have the 2021 GTI 130 SE & I would highly recommend getting the SE model if you can afford it as I have used all of the extra features my first season which totaled 69.3 hours. I’m dying to get back out on the water but in MO it’s going to be another few months before the weather warms up.
@@calasworldnice video bro! But what if the local representatives in Europe don't offer it for sale. Are there other suppliers for the body? Whether it's in US or China? Unfortunately, our dealers here don't sell bodies for any Jet Ski models except for the Spark.. I will be very grateful for your help. I am eagerly awaiting your response.
I see alot of skis with rot , rust and wiring problems because they don't properly clean the ski after being in salt water. What is the best way to clean the engine compartment after a day on the water ..especially in salt water ??
How do you separate the bottom and top hull so easily? Don’t you have to remove all the wiring to the gauge cluster and handle bars? Or is there a faster way because I removed all the wiring before splitting both half’s. How long did it take you?
I sure hope you can answer this question, because there's not much accurate info out there at all. I have a 2020 GTX 300 Limited with the st-3 hull (acrylic outer shell). Someone rammed it into the pretty hard right there where the front tow ring is. Supposedly fiberglass won't bond for a long time to acrylic and Seadoo doesn't sell a replacement hull. So what are people supposed to do if their st-3 hull becomes damaged badly?
@@kevinmorris9712 I have a body shop that I use and they do fix it now you have to use on adhesive resin and you cannot take shortcuts out or you can buy a used hull and put everything from your to that one
hello everyone!! who faced such problem? Loss of power on a 2013 Sea Doo GTX 155, the battery is new, the starter relay is normal, what could be the cause, could it be the voltage regulator, or another reason?
Man you do look easy.👍but I live in VA my 2021 Seadoo RXT X300 bottom hull damaged ( cracked) insurance wasn’t cover. Do you know someone replace , I will take my ski there to repair. Thank you very much.
such a terrible design by seadoo... fiberglass hulls that crack could of been easily repaired (and not as easily broken) ... but hey cheaper for seadoo to make plastic than fiberglass + they make $$$ selling the new hulls. I would never buy a poly hull anything.
Trying to watch your channel is very hard, you seem to think your better then everyone or how people do there builds but I’ve been watching i have t seen 1, 14 or 16 vein pump being installed on any skis, if so I’ve missed them then that’s my apology i wish i was close to you and suck up any ski you had and maybe that would humble you a little anyways have a great day and stop bragging
awesome video, I thought I was the only one who wore high black socks!
😂🤣 Sometimes
Looking at the state of that flange I can't believe the customer would put that back in after such a major overhaul. He's already paying for the labor so how much is a new carbon seal and flange? He better install a bilge pump because he is going to have a leaky boat.
How much is the cost for the hull swap?
I definitely appreciate your videos; thank you for the excellent education you are giving us. Every video is increasing my knowledge of my machine. The one where you took the top off a suspension model was especially helpful as I have a 2014 RXT-X aS 260.
Great video. Please don't stop making it. Love mechanic videos.
Thought the polytec 2 hull would hold up better? What did these people hit? I know some do a lot of river riding which is tough
Awesome video! Absolutely killing it with the informative videos, can’t wait for the Rxp build … hopefully 🙏
Thanks for this video…I’m replacing the hull on a spark but this gives you a great idea of what to do!
Toda esa arena fue cuando tocó fondo 🤣🤣😅😅😅
🤣🤣🤣🤣🤣👌👌
Great video! Do you need an alignment tool for this job?
Ok where are you located? I have 2 2005 GTX 185 sc that are driving me crazy. One has a new motor took it out for the fist time and its alarm and check engine came on. The other has water in the oil now . First time out this year also. They say it most likely the oil cooler. I'm replacing that this week. But I need a mechanic that can work on them and not charge me an arm and a leg. Let me know your location. I'm in Port Charlotte
Good Video - I liked your good & positive attitude towards it all. At least you know they’ll be back for a carbon seal/driveshaft in the future. I have this same model & was surprised to see all the holes in a fresh new hull. You know there are holes for things but just more than I would have thought.
Your clips are always fun, entertaining and educational. Keep it up!!
Great episode. Thanks for sharing. 👍
Great Video! I own one of these skis which I do some videos with on my channel. Haven't had any issues, but nice to see how easy you make it look. Moving the engine and carbon seal are what would make me think twice about tackling the repair myself. I'd be interested to see more details on that. Subscribed!
Your videos are awesome and your funnyman.
Great informative video.I learned so much by watching this video
Nice 👍 videoclip brother
Just had a 2022 GTI se 170 involved in a 2 ski wreck. Atleast a foot & a half from the Front of hull was knocked off.😩 The ski sunk with speakers still visible. I don’t know if the motor is screwed or not but I’d like to converse with you from seeing your video. Help needed…
Awesome video my brother great work
You should mention that lower the IBR before you take the hill apart. I'm there now and trying to figure out how to lower the IBR to be able to remove the jet pump
How do you feel about FOGGING OIL being used for saltwater skis
I’ve never used that before
Good
What kind of sealer do you use to put the pump back on
You mean what kink of silicone I use for installing the pump shoot and ride plate?
Great video brother want to build a ski some day race familyyyy
Mate I’ve watched heaps of your shows from Australia but this particular drive shaft just need a sand paper with about 800 grit wet and dry,
Would you say the plastic is stronger or the fiberglass? What does the bare hull cost? Interesting to see this!
@st5637 Fiberglass will always be stronger than Plastic. However the plastic cost less. Bare hull prices all depend on what model jetski you have
Did they just break from use? or did they hit something, or jumping big waves ? What made them both break on the same day ?
Apparently they were riding next to each other and they hit something on the water
How are the two hulls sealed (top and bottom) any glue used between. Is it hard splitting them? Have to heat it up or whats the process sir?
No glue it has a rubber gasket and 1 million bolts very easy to take apart
Great video Man. What's the difference between a GTI 170 SE versus a GTI 130 (apart from the horsepower) ? If you know ~
The SE Models whether 130 or 170 come with some added features like a reboarding swim ladder, the adjustable trim settings, low speed & cruise control. Go to the Sea Doo website for all the differences. I personally have the 2021 GTI 130 SE & I would highly recommend getting the SE model if you can afford it as I have used all of the extra features my first season which totaled 69.3 hours. I’m dying to get back out on the water but in MO it’s going to be another few months before the weather warms up.
Fiberglass can be repaired where as plastic can’t. Bad manufacturing decision. How did they break the hull?
Hi ! Great video ! Where do you get the replacement hull and how much does it go for ?
You have to order them from your local dealership and they are about $1500 bucks
@@calasworldnice video bro!
But what if the local representatives in Europe don't offer it for sale. Are there other suppliers for the body? Whether it's in US or China? Unfortunately, our dealers here don't sell bodies for any Jet Ski models except for the Spark..
I will be very grateful for your help. I am eagerly awaiting your response.
Por eso no vendo mi RXTX 255 2008 de fibra de vidrio. Cada ves los hacen más cheap!
Thanks for sharing
Hey you better not forget NOTHING WHEN YOU PUT MINE TOGETHER!
I see alot of skis with rot , rust and wiring problems because they don't properly clean the ski after being in salt water. What is the best way to clean the engine compartment after a day on the water ..especially in salt water ??
Clean the whole thing with freshwater but the real trick is having a garage and leaving the seat off until next time you go riding again
Hi, I’m looking for a turbo kit for my 2022 seadoo spark trixx. Can you message me please. Thank you. Love your stuff🇨🇦😁
Is there sealant between hull and deck?
No, there is a rubber gasket
How do you separate the bottom and top hull so easily? Don’t you have to remove all the wiring to the gauge cluster and handle bars? Or is there a faster way because I removed all the wiring before splitting both half’s. How long did it take you?
do you know where i can get a lower hull assembly ?
You have to order it from local seadoo dealer
I sure hope you can answer this question, because there's not much accurate info out there at all. I have a 2020 GTX 300 Limited with the st-3 hull (acrylic outer shell). Someone rammed it into the pretty hard right there where the front tow ring is. Supposedly fiberglass won't bond for a long time to acrylic and Seadoo doesn't sell a replacement hull. So what are people supposed to do if their st-3 hull becomes damaged badly?
@@kevinmorris9712 I have a body shop that I use and they do fix it now you have to use on adhesive resin and you cannot take shortcuts out or you can buy a used hull and put everything from your to that one
My 2018 im thinking my all fiber glass
Still have my 99 GTX Limited 2 Smokes!!!
Ño I remember good times back then it’s on antique now🤣😂🤣😂🤣
hello everyone!! who faced such problem? Loss of power on a 2013 Sea Doo GTX 155, the battery is new, the starter relay is normal, what could be the cause, could it be the voltage regulator, or another reason?
Never seen one like that ! looks like that would at least give you some more room to work on the motor!
I need your help
I’m looking for a hull Yamaha fx svho 2020
Where do you get the replacement hull
Dealer
how much u charg for that
How much you charge for that job
How much the new hull replacement sir?
Man you do look easy.👍but I live in VA my 2021 Seadoo RXT X300 bottom hull damaged ( cracked) insurance wasn’t cover. Do you know someone replace , I will take my ski there to repair. Thank you very much.
How much would a top haul cost for a ´19 Seadoo Gti? Just curious 🧐
1500
@@calasworld that’s so cheap dammm
I need to do the same on a 2019 GTX 300 who did you contact to get the lower hull section
Your local dealer
@@calasworld they said it not available 🙈🙈
I think the 2019 is a FRC material
What year did Seadoo go to plastic on skis other than the spark ⚡️
Message me in Messenger
@@calasworld done replied to Calas Performance
You should make a video on fixing my Yamaha 😂😂
Cheech they are built in Mexico 🇲🇽!!!! If buddy had to much Jalapeños in the assembly line your are out of luck!!!
Made in Mexico 🇲🇽🙌🤪
Pues orale
How much is a replacement hull?
$1500
You'll need an alignment tool also !
Remember....Remember what...lol lol 🎉🎉🎉🎉🎉
How much does a job like this cost? Great job!
It’s not cheap there’s a lot of labor plus the bottom half of a Jeske it’s a few thousand dollars
@@calasworld Thanks for the reply. How much are the lower replacement jet ski hull costing?
$1500
Get an electric rachet. It will save you half your time.
such a terrible design by seadoo... fiberglass hulls that crack could of been easily repaired (and not as easily broken) ... but hey cheaper for seadoo to make plastic than fiberglass + they make $$$ selling the new hulls. I would never buy a poly hull anything.
Seadoo gives you NOTHING!!!
Fiberglass is better you can spend $500 to repair a hole there’s $5000 alone in labor alone to change a hull LOL
I have to give a thumbs down because you didn't show any of the work
People don’t want to see details because they say it’s too boring sorry man you outnumber
Trying to watch your channel is very hard, you seem to think your better then everyone or how people do there builds but I’ve been watching i have t seen 1, 14 or 16 vein pump being installed on any skis, if so I’ve missed them then that’s my apology i wish i was close to you and suck up any ski you had and maybe that would humble you a little anyways have a great day and stop bragging
Just search Vein Pump installation on youtube. There is a plenty videos on youtube.
Ah yes another keyboard warrior lol.