3d Printing PERISTALTIC WATER PUMP BUILD [Part 2/2]
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- Hey everyone,
If you could support me that would be awesome:
/ pattyslab
This is part 2 of the 3d printed peristaltic water pump build! Here I'll use a drill from IKEA as donor for the motor and planetary gear. This pomp has a high capacity of 4 liter let minute! Together with a PWM motor driver you can achieve a variabele flowrate from 0.75 liters let minute to the fast 4.
IMPORTANT:
Use really thin grease or oil in the gear assembly!!
Depending on tolerances motor can require MORE than 3A of startup current!! (3-6A startup)
Hardware list (Only for the motor assembly!):
1x IKEA FIXA cordless drill
1x 3D-printed motor housing
2x 3D-printed coupling
1x 3D-printed gear2shaft
4x M3x25 countersunk
10x M3 nut
16x M3 washer
2x M3x5 setscrew
1x M5x25 hex bolt
1x M5 Nut
5+ M5 washers
Motor temps:
Soon to come
Thingiverse:
www.thingivers...
#IKEA #3dprinting #peristalticpump #pump #peristaltic #diy #pattyslab #innovative #highcapacity #fast #flow #flowrate #electricalengineering