Asus UX425 & Dell XPS 9300 motherboard repair attempt

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 พ.ย. 2024

ความคิดเห็น • 55

  • @electronicrepairservice2020
    @electronicrepairservice2020 ปีที่แล้ว +6

    Great compilation. I think the most difficult part when troubleshooting is knowing when to quit because it goes against everything you strive for - a fix.😖 Rabbit holes are also part of the learning process/experience. 🤯🤬

  • @grizzli211
    @grizzli211 ปีที่แล้ว +1

    The second one was bios issue . Me region was faulty. Probably customer reprogramed bios chip and ec chip .

  • @PracticalKnow
    @PracticalKnow ปีที่แล้ว +31

    "The girls are beautiful in Poland, *but don't bring me one... my wife will go crazy"* made the whole video 🤣

    • @Stabio_PL
      @Stabio_PL ปีที่แล้ว +1

      100% true. Pure beauty!

  • @fernalication
    @fernalication ปีที่แล้ว +2

    Dell XPSes should have a complete dedicated channel. Man.... those things are really tricky

  • @jozsiolah1435
    @jozsiolah1435 ปีที่แล้ว +1

    Asus uses a pressure sensor in some parts of their motherboards. These sensors are able to lock down the whole laptop, and the battery. You may have to buy a new battery if this happens. As the laptop becomes older, the plastic cover shrinks, stressing the pressure sensors. That causes malfunction if the laptop is moved on a desk, or when used in car. If the wifi card is not Azureware, that causes malfunction. If the cpu is not a dedicated Turion, that also causes malfunction, but you can upgrade it to 2.4 Ghz. Same with other laptop, if it doesn’t support the 2 ghz fsb of the QL65 Amd, your windows may halt after 30 days after the cpu’s installation. This type of fix needs the battery to be discharged in Bios. Bad batteries can be easily destroyed when discharged in bios, so it needs some refresh in Windows first. Bad batteries are nearly the cause of all defects in laptops. For Asus, 3 discharges are needed in Windows, one in Bios. These need to be repeated more times, in all power schemes. Fan speed will drop, less heat, and higher performance for the cpu, and the vga. For Dell, it needs 10 discharges in Windows, one in Bios. It has to be sure, that the battery is in good condition. Some brands, regions have the performance factors locked for the cheap sale. Still, the described method unlocks the features, and the laptop will gain high performance, and no malfunction. The default batt management is a curse, it connects to a server, and decides whether the user is allowed to use this elite mode or not. If you uninstall the software, Windows will take care of the batt management. Then the user can transfer his millions in a cave, tent, or anywhere he wants to. Also, the user can play games freely, without his laptop being manipulated. Mice should be wired, not radio types. They are also connecting somewhere, and it is decided to use or not. Wireless mice are manipulated, and sometimes impossible to use. Asus needs Asus Win dvd, not satisfied with the normal dvd, even if it is legal. When you have a legal win dvd, you have to insert it yearly, when the tray pops out. The code has to be around the cpu, chipset, vga chip. Its thermal camera reads the stripe when the laptop heats up. Some bar codes have to be removed above the cpu, or any black plastic material. When the bar code is placed in an angle, that means, the user is a fag. You have to remove it, it is read by a satellite, and may cause malfunction.

  • @johannesdesloper8434
    @johannesdesloper8434 ปีที่แล้ว

    cool I'm getting into your analysis and action routine.

  • @SidneyCritic
    @SidneyCritic ปีที่แล้ว +1

    Needs to put some tape over the buzzer hole, ouch that's loud.

  • @fredcrugerh2
    @fredcrugerh2 ปีที่แล้ว +19

    Hi Sorin, hugs from Brazil. I am a intusiast and i take broken laptops to try the repair. In an dell precision 7520, a problematic BIOS file gave me cpu fail led code, i change the version and fail desapear. A broken or corrupted BIOS can show CPU fail. Try one more time and see. Bye

    • @fernalication
      @fernalication ปีที่แล้ว +3

      Sorin, look at this comment!

    • @muhamedabdulkerim5611
      @muhamedabdulkerim5611 5 หลายเดือนก่อน

      I think SORIN should also make another video on this case

  • @shiftctrlhack
    @shiftctrlhack ปีที่แล้ว +7

    Wow I wish all my customers provided me extra capacitors / components and boardview files. 😀😀😊😊

  • @Martin-ot7xj
    @Martin-ot7xj ปีที่แล้ว +2

    Hi there, at 18:59 you said 12 ohms is a little bit low, my question is normally how much ohms it might be? because you are not saying normally for example must be 200 ohms but now 12 ohms, that means is low. please in your next video explain more. thnx

  • @medhatal-moudarres5881
    @medhatal-moudarres5881 ปีที่แล้ว

    The second one has a strange behavior i didn't see like this before

  • @user-hv2qk3ji1l
    @user-hv2qk3ji1l ปีที่แล้ว +5

    Hi Sorin, I have a question for you. If a laptop can not be fixed because a CPU/GPU or chipset has failed, would you still charge the customer for the diagniostics? Regards Dean.

    • @geovani60624
      @geovani60624 ปีที่แล้ว +3

      if you spend time diagnosing an equipment you need to charge for it

    • @juliusvalentinas
      @juliusvalentinas ปีที่แล้ว +2

      Only in uk you charge 60pound for charging port, in other countries you diagnose for 10-15eur then charge whatever you want for the job plus parts but the price is negotiated with the customer. Warranty is for parts replaced only, warranty is 3months

  • @toniedeo2936
    @toniedeo2936 ปีที่แล้ว

    Sorin, what do you think about the Crankk iot project??

  • @user-rw7nh7jl9l
    @user-rw7nh7jl9l ปีที่แล้ว +1

    that dell laptop can fix via reball cpu or reballing under cpu chip

  • @Abdallah.795
    @Abdallah.795 ปีที่แล้ว +2

    We should buy bga machine and look for trusted sller cpu and gpu and replace these cpus

  • @mr.bobot728
    @mr.bobot728 ปีที่แล้ว

    I have a gaming laptop and recently I disassembled it and took out the RAM but I accidentally felt the pins of what it has there and then I put it back but then I put a steel cover on it and when I put it on the mini electricity flashed and then I turned on the laptop and normally turned off immediately and then I thought it was the RAM so I took it out again and the laptop worked normally but the monitor didn't work then I turned it off and put the RAM back in and it turned off again right after I turned it on, now I'm not sure if it will be RAM or if I blew the motherboard.

  • @icommandoi145
    @icommandoi145 ปีที่แล้ว

    dell xps - the 2 amber and 1 white. Have you tried to re-flash bios and since RAM is soldered on reflow the ram?

  • @sniper5406
    @sniper5406 ปีที่แล้ว +1

    Flex BV is expensive for me Sorin, can you suggest a cheap or a free Board View ?, thank you

    • @pldaniels
      @pldaniels ปีที่แล้ว +2

      OpenBoardview is the free fork of FlexBV. Because FlexBV is a perpetual licence, it never expires, it is cheaper than subscription software though.

  • @mayuramunasinghe1983
    @mayuramunasinghe1983 ปีที่แล้ว

    Can you replace the Vcore mosfets and check?

  • @ArkuSone
    @ArkuSone ปีที่แล้ว

    Fixed same laptop. Pozdrawiam 😉

    • @gamingera1948
      @gamingera1948 ปีที่แล้ว

      How?

    • @ArkuSone
      @ArkuSone ปีที่แล้ว

      @@gamingera1948 mine had two caps dead. There was a boot but no charge.

  • @Maciej.R.
    @Maciej.R. ปีที่แล้ว +1

    Poland. Pozdrawiam.

  • @gamersofficial9928
    @gamersofficial9928 ปีที่แล้ว

    Hp elitebook 840 g1 12volts missing on mosfet ahead of main, 25volts on the gate to previous mosfet and 19volts are present, whats the cause?

  • @sipansibabdreddknot5179
    @sipansibabdreddknot5179 ปีที่แล้ว

    GGWP! sorin des ne!

  • @gnodmallari9070
    @gnodmallari9070 ปีที่แล้ว +1

    mr. sorin what's the name of your boardviewer software?

  • @ronlevin2339
    @ronlevin2339 ปีที่แล้ว

    Asus UX425 when I seen that battery is charging, but without battery is taking 100mA, I immediately though - DAMM, again a dead CPU. Strange that I did not see 1-2 sec fan spin as I usually see in this case.

  • @pakkpl
    @pakkpl ปีที่แล้ว +1

    reball cpu, maybe some pin is not connected ;)

  • @MrRvdbeek
    @MrRvdbeek ปีที่แล้ว

    What’s the problem dead cpu again that’s the future of fixing can’t believe it’s normal. Something must change. We have to fix the board before the cpu is dead can we?

  • @andrikokakupa3329
    @andrikokakupa3329 ปีที่แล้ว

    Hi the laptop just shut down permanent after making weird sounds how can i fix the problem
    my teacher told me it's a battery problem and the other one say its the CPu or the Hard disk drive i am confused know

  • @lnglng6961
    @lnglng6961 ปีที่แล้ว +1

    ❤❤❤

  • @daryushkh
    @daryushkh 11 หลายเดือนก่อน

    when cpu is cold of coarse bios is not active and writing bios can not help.

  • @hebahel
    @hebahel ปีที่แล้ว

    Hello Sorin
    Did you mind if i translate your video to Arabic on youtube ? because you know copy right

  • @louiziabderrahim
    @louiziabderrahim ปีที่แล้ว +2

    Good morring,
    My name is Abderrahim, and I am from Morocco.
    I hope this email finds you well. I am writing to seek urgent assistance with a problem I am facing with my HP ProBook 640 G8 laptop. Regrettably, my laptop is not turning on, and I am seeking guidance to resolve this issue.
    Description of the Problem: When I attempt to power on my HP ProBook 640 G8, there is no response from the laptop. The screen remains blank, and there are no signs of any power or activity. I have checked the battery, power adapter, and made sure everything is securely connected, but unfortunately, the laptop continues to exhibit this behavior.
    Request for Assistance:
    I kindly request your expertise and assistance in diagnosing and resolving this issue. If possible, please provide me with detailed instructions on any additional troubleshooting steps that I could try.

    • @kaiserschnitselsr
      @kaiserschnitselsr ปีที่แล้ว

      google?

    • @louiziabderrahim
      @louiziabderrahim ปีที่แล้ว

      @@kaiserschnitselsr I don't understand ?

    • @Skarz289
      @Skarz289 ปีที่แล้ว +1

      اخي عبد الرحيم مستحيل يقدر يساعدك عن بعد انت لازم تشوف اذا في 19 فولت على البورد واذا في 3.3 فولت موجودة او لا في البداية تاكد من مدخل الشحن وبعدين شوف اذا ال 19 توصل للبورد بشكل عام اذا انت ما بتقدر تعمل هذه الخطوات بنفسك ارجع في الفيديوهات بهذه القناة راح تلاقي اكثر من فيديو يشرحلك كيف تفحص ال 19 وال 3.3

    • @louiziabderrahim
      @louiziabderrahim ปีที่แล้ว

      @@Skarz289Ok ,
      شكراا عمر
      19 فولط موجودة

    • @supernova1163
      @supernova1163 ปีที่แล้ว +1

      This isn't email this is TH-cam comments section.

  • @ctecrwp
    @ctecrwp ปีที่แล้ว

    Master Sorin.... I'm always scary of ur dodgy soldering.

  • @calexandru25
    @calexandru25 ปีที่แล้ว

    Pentru că se gindea ca nu găsești asa ceva😅

  • @lucataszarek8782
    @lucataszarek8782 ปีที่แล้ว

    Hello🤝👏👏👏👍👍👍👍👍👋👋👋👋👋🇵🇱

  • @lucabarbolovici4974
    @lucabarbolovici4974 ปีที่แล้ว

    Not noice

  • @hugovale8070
    @hugovale8070 ปีที่แล้ว

    Dear sir i have a job four you , 🤑I will send you proper calibrated fuses , and new hinges i promise ☺Cheers Sorin

  • @Pihmusik-PiCh-Expert
    @Pihmusik-PiCh-Expert 2 หลายเดือนก่อน

  • @iainmaois595
    @iainmaois595 ปีที่แล้ว

    Good morning sir from here I sent a massage on discord please be of help