My 2 favorite Meguiars Guys! Great video, and to be honest I'll have to rewatch this again because my mind started wondering off several times thinking about different topics you guys was mentioning from time to time. I'll be getting me a bottle or 2 plus 799 booster and using on my son's and wife's vehicles and seeing how they act and perform. By the way, you 2 together in these shop talk videos are great for educational & informative directions and proper uses on what to expect and how to use correctly. Thanks and can't wait to get and use meguiar's tri-8's
@@meguiars … gladly I’ll share my experience and thoughts afterwards. Thank you for great products I’ve been using since the mid-1980’s and this informative video.
Just off a 10hr session, getting M888 on my Integra Type S. I used some old D114 waterless at 8:1 to help the initial strip off any old waxes and sealants, then your stinky decon, then clay bar'd with last touch, then your surface prep, then finally M888. Cos i wanted to use the applicator on the same day, i went all out and took off the wheels and while they were off, i went at the calipers. It was more work that i thought ! I also noticed the car was statically charged, and i was getting a lot of fluff that didn't want to come off easily. I'm in South West Florida and the temps were in the upper 80s, and high humidity so working in that type of heat all day, i can safely say i am totally spent ! Anyway my question is my typical weekly clean is your D115 for a waterless wash, then i like to use M27 as my LSP, then syth - x on the wheels. and the car always looks brand new. I do have the MT300 DA and microfiber pads and polish and compound, but there's absolutely no swirls or light scratches, so i didn't bother with a polish. But if you're like me and just find a waterless wash the quickest way to clean your car, cos it doesn't drip all out the cracks and crevasses is it ok to continue to use these products, given after trying just about every other product, i find these the easiest and fun to use. I do have your M799, but honestly not a fan. I've tried it full strengh and 3:1 and its always more work than your other products. I know its the optimal, but for someone who just loves a clean car, and well when you're doing a bi-week detail your car is protected ! any reason to NOT use a wax based product over M888 ? ps i tried to sign up to your forums, but you never approved ! and i even wrote to your webmaster, hence the long post here !
A lot to take in there but we think we understand your basic question/questions. While using a wax on top of our M888 or any coating for that matter is not necessary using the M27 would be fine. Using it at some point will probably even help maintain the protection and water beading of the coating. Using our Waterless Wash & Wax or our D115 as opposed to our M799 Bead Booster or our Hybrid Ceramic Detailer could have an impact on the water beading behavior. Not necessarily degrading or harmful in any way but something to consider. Hope that helps and keep in mind our Solutions Hub of experts is always accessible through many different forms of contact including phone, email, live chat, FB, IG, etc.
@@meguiars Thanks Megs for replying so fast. So for waterless clean, you say use M799 ? i mean perhaps it'll be easier for me now M888 is on top and less streaky. I only ever used it as an LSP. Perhaps cos i was applying over an existing sealant / wax it streaked on me a little. it i'll give it a try. Really a short version of my question is what waterless product do i use to clean the car, as getting a hose out, is more work with all the drips hanging around even after i blast my cracks and crevasses with a gas blower . My car only ever has very light dirt on it. pollen, light dust etc (apart from the wheels) which seem to be a brake dust magnet !
A good spray detailer like our Hybrid Ceramic Detailer or the M799 diluted at 1:3 would our best recommendation but only if the car is not too dirty. Also keep in mind that with the M888 now on the vehicle you will find washing and maintaining easier.
@@meguiars thanks i'll give both a try. i went out this morning to the car, and, gave it a light stroke. oh man it really is the slickest its ever felt. I'm not driving it today, i'm leaving it in the garage to cure, but just wanted to say hats off to you guys for developing this stuff. First time using a proper ceramic coating. I was never going to pay someone else, so this product was for someone like me !!! You really never know how slick and how much pop the paint will look or feel til you try the product for yourself, and for anyone else out there considering this product its a 10/10 for me!
I actually don't mind the scent of Meguiar's Iron Decon / Spray Clay. It's somewhat mild and doesn't have that "someone's been eating hard boiled eggs" smell.
I had been using Meguiar's products for over 20 years. In the last 7 years I added the Ultimate fast Finish to my 6 month detailing routine on my vehicles. I'm interested in trying the M888 on my 2024 Mazda CX50. Do I have decontamite and remove the wax and sealant. If I have to, what is your recommendation for a new vehicle ?
I am thinking- after a decon wash and clay, about doing m200, then M122 before the M888. Do you recommend waiting a little bit after the M122 (might wipe it down twice to be sure) before the M888? Also, the one thing that su*ks about coatings is the off gas smell and solvent haze. Does this coating have that solvent smell where you need a respirator and open garage? Thanks!
There is no reason you need to wait to apply the coating after using M122. Our M888 arguably has only a faint solvent scent compared to many other coatings but that of course is very subjective depending on the person using it. As far as respirator requirements and PPE that is something you would have to assess based on the SDS and your work environment. All Safety Data Sheets can be found on our website.
In theory you have already brought the paint to its full potential before applying the coating. If you want to use products to maintain the protection, shine, and a water beading after applying the coating you can use a good product like our Hybrid Ceramic Detailer or our M799 Bead Booster.
Again, the product is designed to work best on paint although it will work on plastic and other exterior surfaces as well. Ideally clean/bare plastic would also be better before application. In some cases that might only require washing but in others you may want to use a good all purpose cleaner to clean the plastic as well. Either way you will be using the M122 Surface Prep which will remove any waxes, oils, etc from the surface before applying.
Difficult question to answer specifically. As you might imagine it would not be ideal for any vehicle to regularly have "oil" sitting on the surface. Also seems very odd to apply a professional coating to a vehicle you clearly care about and then subject it to an environment where this would occur. While we certainly understand accidents happen the most practical future plan of attack would simply be to fix whatever issue would cause this adverse situation. In summary... Would the coating likely help delay or prevent damage from oil to some extent, yes; however the best solution would be to simply avoid this altogether.
@@meguiars ITS HARD TO AVOID ALOT OF SEMI TRUCK AND NASTY VEHICLES LEAKING DIFF FLUIDS OR OTHER OILS AS THEY DRIVE THEY HIT THE FRONT OF YOUR VEHICLE....
So, you want the official TH-cam channel of Meguiar’s making comparisons against other brands? That’s no gonna happen… Most of the well known brands don’t need to prove their the products work. Meguiar’s in this case has a group of professionals behind every product and for most of the clients, enthusiasts and professionals, that will be enough to trust a new product.
I've been detailing with Meguiars 20 plus years cant wait to try this coating!
I have this applied properly on my Crosstrek, and it's been fantastic. Makes washing the car crazy easy, and the beading and slickness is insane.
❤️
Thanks for sharing!
Markus is back!!!
Woohoo! 😂
Loved watching this, hope it can make it down to Australia ❤
My 2 favorite Meguiars Guys! Great video, and to be honest I'll have to rewatch this again because my mind started wondering off several times thinking about different topics you guys was mentioning from time to time.
I'll be getting me a bottle or 2 plus 799 booster and using on my son's and wife's vehicles and seeing how they act and perform.
By the way, you 2 together in these shop talk videos are great for educational & informative directions and proper uses on what to expect and how to use correctly.
Thanks and can't wait to get and use meguiar's tri-8's
❤️
Thank you for the great feedback!
Don't be too flattering of Mike and Markus though or they will be even more difficult to work with! 😆
Agreed, Michael Stoops, and Markus Kleis are quite the team for this. I always enjoy Mike Pennington making an appearance as well.
Hybrid paint coat was incredible. I’ve ordered this to Canada so I’m stoked to see how it goes.
So looking forward to seeing this because Markus is back!
❤️
Thanks Mike & Markus!
👍
M888 believe I’ve decided will be the coating I apply on my 2023 Acadia!
❤️
Let us know what you think when you do.
@@meguiars … gladly I’ll share my experience and thoughts afterwards. Thank you for great products I’ve been using since the mid-1980’s and this informative video.
Estou esperando o visita do Stoops aqui no Brasil… para testamos o M888
Just off a 10hr session, getting M888 on my Integra Type S. I used some old D114 waterless at 8:1 to help the initial strip off any old waxes and sealants, then your stinky decon, then clay bar'd with last touch, then your surface prep, then finally M888. Cos i wanted to use the applicator on the same day, i went all out and took off the wheels and while they were off, i went at the calipers. It was more work that i thought ! I also noticed the car was statically charged, and i was getting a lot of fluff that didn't want to come off easily. I'm in South West Florida and the temps were in the upper 80s, and high humidity so working in that type of heat all day, i can safely say i am totally spent ! Anyway my question is my typical weekly clean is your D115 for a waterless wash, then i like to use M27 as my LSP, then syth - x on the wheels. and the car always looks brand new. I do have the MT300 DA and microfiber pads and polish and compound, but there's absolutely no swirls or light scratches, so i didn't bother with a polish. But if you're like me and just find a waterless wash the quickest way to clean your car, cos it doesn't drip all out the cracks and crevasses is it ok to continue to use these products, given after trying just about every other product, i find these the easiest and fun to use. I do have your M799, but honestly not a fan. I've tried it full strengh and 3:1 and its always more work than your other products. I know its the optimal, but for someone who just loves a clean car, and well when you're doing a bi-week detail your car is protected ! any reason to NOT use a wax based product over M888 ? ps i tried to sign up to your forums, but you never approved ! and i even wrote to your webmaster, hence the long post here !
A lot to take in there but we think we understand your basic question/questions. While using a wax on top of our M888 or any coating for that matter is not necessary using the M27 would be fine. Using it at some point will probably even help maintain the protection and water beading of the coating.
Using our Waterless Wash & Wax or our D115 as opposed to our M799 Bead Booster or our Hybrid Ceramic Detailer could have an impact on the water beading behavior. Not necessarily degrading or harmful in any way but something to consider.
Hope that helps and keep in mind our Solutions Hub of experts is always accessible through many different forms of contact including phone, email, live chat, FB, IG, etc.
@@meguiars Thanks Megs for replying so fast. So for waterless clean, you say use M799 ? i mean perhaps it'll be easier for me now M888 is on top and less streaky. I only ever used it as an LSP. Perhaps cos i was applying over an existing sealant / wax it streaked on me a little. it i'll give it a try. Really a short version of my question is what waterless product do i use to clean the car, as getting a hose out, is more work with all the drips hanging around even after i blast my cracks and crevasses with a gas blower . My car only ever has very light dirt on it. pollen, light dust etc (apart from the wheels) which seem to be a brake dust magnet !
A good spray detailer like our Hybrid Ceramic Detailer or the M799 diluted at 1:3 would our best recommendation but only if the car is not too dirty.
Also keep in mind that with the M888 now on the vehicle you will find washing and maintaining easier.
@@meguiars thanks i'll give both a try. i went out this morning to the car, and, gave it a light stroke. oh man it really is the slickest its ever felt. I'm not driving it today, i'm leaving it in the garage to cure, but just wanted to say hats off to you guys for developing this stuff. First time using a proper ceramic coating. I was never going to pay someone else, so this product was for someone like me !!! You really never know how slick and how much pop the paint will look or feel til you try the product for yourself, and for anyone else out there considering this product its a 10/10 for me!
I actually don't mind the scent of Meguiar's Iron Decon / Spray Clay. It's somewhat mild and doesn't have that "someone's been eating hard boiled eggs" smell.
Is it possible meguiars make the same coating for everyone not only for professionals? this product seems to be a banger.
Not sure what you mean?
This can be purchased and used by anyone.
I had been using Meguiar's products for over 20 years. In the last 7 years I added the Ultimate fast Finish to my 6 month detailing routine on my vehicles. I'm interested in trying the M888 on my 2024 Mazda CX50. Do I have decontamite and remove the wax and sealant. If I have to, what is your recommendation for a new vehicle ?
Here is video installation guide that should answer most of your questions about proper prep and installation...
s.3m.com/6km3hryo
They answered this at 16:30…
But the mirror bright kit has gone 😢
Great videos..👍🏻… 😎
Thank you!
Is a topper of some sort recommend to help protect during the initial 7 day cure?
No, avoid any chemicals, water or toppers for the first week.
-MK
@@MarkusKleis what if it rains on it?
Covering in the curing conversation starting around 8:16...
s.3m.com/wbczjyjn
No, as mentioned in the video we do not recommend any chemicals be used during the 7 day full cure.
@@meguiars somehow missed that the 1st time..oops
I am thinking- after a decon wash and clay, about doing m200, then M122 before the M888. Do you recommend waiting a little bit after the M122 (might wipe it down twice to be sure) before the M888?
Also, the one thing that su*ks about coatings is the off gas smell and solvent haze. Does this coating have that solvent smell where you need a respirator and open garage?
Thanks!
There is no reason you need to wait to apply the coating after using M122.
Our M888 arguably has only a faint solvent scent compared to many other coatings but that of course is very subjective depending on the person using it. As far as respirator requirements and PPE that is something you would have to assess based on the SDS and your work environment. All Safety Data Sheets can be found on our website.
Can u add a topper to add more gloss? If so, what do u recommend?
In theory you have already brought the paint to its full potential before applying the coating. If you want to use products to maintain the protection, shine, and a water beading after applying the coating you can use a good product like our Hybrid Ceramic Detailer or our M799 Bead Booster.
How many cars can one bottle cover? I have two cars and I would like to be able to cover both cars with 2 coats each.
You should be able to do both cars but there is not much of a reason to do 2 coats on each.
Can this be applied over Meguiars Tech wax?
This is a coating which takes the place of any other wax/sealant/coating. As with all coatings it should be applied to a bare surface.
What is the preparation process for plastic trim?
Again, the product is designed to work best on paint although it will work on plastic and other exterior surfaces as well. Ideally clean/bare plastic would also be better before application. In some cases that might only require washing but in others you may want to use a good all purpose cleaner to clean the plastic as well. Either way you will be using the M122 Surface Prep which will remove any waxes, oils, etc from the surface before applying.
What about the applicator? Can you reuse it? most applicators are a one use only and the coating cures and a new applicator must be used...Thanks
Correct, the applicator pad should be discarded after use.
@@meguiars can you purchase the applicator pads separately?
Hey! Is the microfiber face of the applicator the same as the MF Cutting or Finishing Pad?
It is not.
I recently bought m888, haven’t used it yet…How’s the gloss?
Great question. The gloss is excellent for a coating. 👍
Does it have oil phobic properties, I've had a coating fail from leaking oil from vehicles driving in front of me.
Difficult question to answer specifically. As you might imagine it would not be ideal for any vehicle to regularly have "oil" sitting on the surface. Also seems very odd to apply a professional coating to a vehicle you clearly care about and then subject it to an environment where this would occur. While we certainly understand accidents happen the most practical future plan of attack would simply be to fix whatever issue would cause this adverse situation.
In summary... Would the coating likely help delay or prevent damage from oil to some extent, yes; however the best solution would be to simply avoid this altogether.
@@meguiars ITS HARD TO AVOID ALOT OF SEMI TRUCK AND NASTY VEHICLES LEAKING DIFF FLUIDS OR OTHER OILS AS THEY DRIVE THEY HIT THE FRONT OF YOUR VEHICLE....
Gotcha!
Makes sense. 👍
Where do you live that this happens?
Can it go on glass?
It is designed to work best on paint but yes, it can also be used on glass and other exterior trim.
@meguiras can you please sell the applicators separately?
We hear you.
Thanks for the feedback.
Wow that bottle small. Im constantly spilling stuff. 😂.
I feel Markus doing videos on his own, does a much better job explaining the product and more
Has the Hybrid Paint Coating been deprecated upon the release of this product?
Not sure we understand your question? Did you mean to type "deprecated"?
@@meguiars That is what I typed, I think you misread it but no problem. I could not find it on the main site.
No, the value has never diminished. It's still an outstanding product.
It has however, been discontinued.
Please make available in Australian but not at the price gouging price like all you other products are.
Feel free to reach out directly to our partners there with your request...
s.3m.com/ps9eci1u
First!!!
Loser!
And yet, they don't show a video proving their claims with evidence comparing it to other "pro-grade" coatings.
There will be hundreds of people on TH-cam doing that.
@@danlc95if Megs did show a comparison, he'd just say that was bs too, plus there is legal exposure involved in that
So, you want the official TH-cam channel of Meguiar’s making comparisons against other brands? That’s no gonna happen…
Most of the well known brands don’t need to prove their the products work. Meguiar’s in this case has a group of professionals behind every product and for most of the clients, enthusiasts and professionals, that will be enough to trust a new product.
Well said. 👍
As a well established and respected brand there are many professional and legal considerations surrounding public side by side testing.