I only hope, Fenix, Pmdg etc. will finally start using the default Airac cycle, which is as good as the Navigraph's one. Otherwise we will still be dependent on Navigraph, when using these companies' planes.🙁
I've flown flight sims for years, and used Simbrief and Navigraph to construct flight plans. But, thank you so much, I learned quite a few things from this very well presented tutorial. Liking and subbing seems a modest thanks for your effort, so both have been done!
@@NickStaib thank you! I do have a tutorial on how to get Navigraph charts on the EFB too. But I’m getting used to the asobo charts it’s growing on me.
Great explanation , really detailed, learned a lot. Any tips on how to start from a parking spot after programming the route on the EFB? When adding a parking spot or gate from the world map I loose the complete route, hmmmm.
Even when you click on send to avionics before you start the flight ? This must be a bug there’s a lot of bugs that hopefully will be sorted out in the patch on the 9th December.
Just daydreaming here, but wouldn’t it be amazing if we could open the EFB on an actual iPad, place it right next to the screen showing MSFS, and interact with it directly on the iPad? This tutorial was great-very clear and well-explained! I do have a question, though: I noticed your CDI was set to LOC. That made me wonder-where is the plane getting that localizer signal from? For example, I assume you wouldn’t be able to pick up radio signals from Amsterdam while flying over London. So, how does that work in practice? From what I understand, you’d have your CDI set to GPS for most of the flight, following the route in the flight plan. Then, as you approach the base leg or intercept the localizer, you’d switch the CDI to LOC. Is that correct? If you have any recommendations for a good tutorial on this topic-or if you could create one yourself-that would be awesome!
This would be amazing I hope we get this support in future but you can do this with a navigraph subscription with navigraph charts app on iPad. Not sure if you like me to do a tutorial about it.. There is also a g1000 ipad app that you can get from and you can choose between the PFD side or MFD side where you can access your route. I could also do a video on that also. Regarding the CDI I think the aircraft programmed the Luton localiser by default for the take off. Not sure what was going on there, but yes on approach you switch from CDI to LOC. would you also like me to do an ILS landing tutorial in the Cessna ?
@ Since the route planner is already built into MSFS, and I’ve never used Navigraph (mainly because I’m a beginner and playing on Xbox), I think I’ll stick with what I’ve got for now. The EFB flight planning seems decent enough for my needs. The reason I was asking about CDI and GPS/LOC is that I just passed the Instrument Rating exam in MSFS2024 Career mode. Honestly, the exam was a breeze compared to all the training sessions-especially VOR, RNAV, and ILS. Now that I’ve moved on to VIP charter flights, I’m realizing I still have a lot to learn! During one flight, the GPS flight plan worked okay, but when I switched to LOC, it seemed way off-I wasn’t sure where it was taking me. Thankfully, the skies cleared, and I managed a visual landing after improvising a crosswind pattern when I realized I was way too high to land properly. ILS approaches, long-distance navigation, and using autopilot are all pretty new to me since I didn’t dive too deep into MSFS2020. So, I’d definitely say I’m still a complete beginner and eager to learn more so I can follow best practices and improve my flying skills!
@@Operaatoorsthe features in the efb are more than enough for anyone to learn I even think less people will have a need for navigraph now. Also if you active the approach on the g1000 it should switch from CDI to LOC when you reach the first approach waypoint. That’s what happens in real life it should be simulated also. If you don’t know how to do that I will make a future tutorial on this.
@@OzzySafa the tutorial for this end phase would be very great! I think that MSFS tutorials does not cover it, or I haven’t got so far yet. Either way, this would be really nice :) Thanks
Great video. When modifying your IFR flight plan in the EFB mid-flight and clicking "File with ATC", does this work for you? No matter what I do it seems to continue giving vectors for the previous flight plan. Most likely a bug, but could also be user error. Moreover, it seems that the approaches, arrivals and departures on the EFB differ quite significantly from the ones available on the G1000/3000. Cheers
Yes most definitely a bug.. I think fixing the bugs on the EFB is highly requested by the community in the forums. I know we are having a patch on the 9th December. I will try modify my flight mid flight and let you know what happens
Thank you! Very understandable. Any idea why Im not getting any weather and no maps from the airports when I choose routes in the EFB ? I very much would like to check out the ILS landing or RNAV or RFP 😅
I will look into this. The thing is the default Airbus v2 by inibuilds uses its own efb different to asobo and the only way I know so far is to use simbrief which is a free. I do have another tutorial that shows you how to create a flight plan on simbrief that intergrates with the asobo efb which you can open using the toolbar. This might be of help. th-cam.com/video/SzeUzWxLnLs/w-d-xo.htmlsi=d5pSs954du63MBLW Watch this one 2nd: th-cam.com/video/MfsMUpFwH4Q/w-d-xo.htmlsi=bYxUyktHMNdc8bvS
Airacs are the original ones (hence of the same quality as Navigraph's) and are updated at the same time as the original ones. We only can hope, that companies like Fenix and Pmdg finally untie their business relationship with Navigraph und start using the default free airac cycles. Anything else would be a slight against the flightsim community.
I’ll still keep my subscription I prefer their charts and I love their iPad app which shows where my aircraft is when I have it next to my monitor. If asobo made an efb iPad app I’d be all for it.
At 16:27 I started a new flight without a plan because I forgot to mention the check list. After that part the magenta lines all matched fine with the original flight.
Great analysis, thank you! A bit off-topic, but I wanted to ask: I have a SafePal wallet with USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). How can I transfer them to Binance?
you cut the video once you loaded the game after you created flight plan that plan wasn't on avionics 17:07 and then all of the sudden after you cut the video at 17:10 flight plan is there so wtf dude?
Yes I did haha you have a good eye. I had reloaded a blank flight plan after the flight because I forgot to talk about the check list. But I put that into the part of the video before I go over the avionics flight because most people start off cold and dark but it was all recorded after the main tutorial. I went back to do that part again.
@@OzzySafa but the thing is I came here to figure out why my flight plan is not loading to avionics because it's empty once I start the plane. And no matter how many times I click send to avionics it's not there avionics is empty.
@ you’re not the only person this has happened to. Someone else on my comments had this issue. Make sure you file with atc first and then click load to avionics. If not try a different flight from somewhere else as I know there are many bugs to do with the efb. Let me know if you’re able to try another flight.
@@OzzySafa Yeah I'm not doing this for the first time you talking to a mfs20 vet with over 2k hours 😁😁 but yes in mfs 24 so far I had no luck with loading flight plan from EFB to any aircraft in the game. I just stopped playing 4 days ago.
Big thanks for this. Having those charts available - for free (no navigraph needed) - is huge. Well done MS for doing this...totally unexpected!
This is one of the best EFB learning videos I've seen yet.. thank you for the effort.♥♥♥
@@AUM_3000 you’re welcome makes me happy that it’s useful for many of you
I'm finally cancelling my Navigraph subscription today!
I only hope, Fenix, Pmdg etc. will finally start using the default Airac cycle, which is as good as the Navigraph's one. Otherwise we will still be dependent on Navigraph, when using these companies' planes.🙁
I've flown flight sims for years, and used Simbrief and Navigraph to construct flight plans. But, thank you so much, I learned quite a few things from this very well presented tutorial. Liking and subbing seems a modest thanks for your effort, so both have been done!
@@NickStaib thank you! I do have a tutorial on how to get Navigraph charts on the EFB too. But I’m getting used to the asobo charts it’s growing on me.
Thanks for the tutorial! I've only done a few casual flights in 2024 and this is my first look at the EFB. Great new feature!
This was an excellent instructional video. I learned a lot. THANK YOU
You’re very welcome I have more content coming that you might like
Thank you so much! Finally a tutorial for someome like me not being a Navigraph fan boy.
You have got a new subscriber.👍
Glad I could help! Thanks you
Absolutely sensational input. Well constructed and given clear and lucid. Happy to join you. As I am a novice, you have helped immensely. Thank you
Glad I helped you 🙌now go practice those approaches
You’re welcome ! Now go practice those flights and approaches 🙌
Fantastic, very well explained. Thanks for your great work👍
Liked and subscribed. This is a huge help thank you!
Great explanation!
Great tutorial thank you!
Omg I needed this 😭😭😭
Well explained.
Very well put tutorial
I subbed, awesome video sir.
Thank you appreciate it. More content coming that might be of help.
Great explanation , really detailed, learned a lot. Any tips on how to start from a parking spot after programming the route on the EFB? When adding a parking spot or gate from the world map I loose the complete route, hmmmm.
Even when you click on send to avionics before you start the flight ? This must be a bug there’s a lot of bugs that hopefully will be sorted out in the patch on the 9th December.
good tutorial
Just daydreaming here, but wouldn’t it be amazing if we could open the EFB on an actual iPad, place it right next to the screen showing MSFS, and interact with it directly on the iPad?
This tutorial was great-very clear and well-explained! I do have a question, though:
I noticed your CDI was set to LOC. That made me wonder-where is the plane getting that localizer signal from? For example, I assume you wouldn’t be able to pick up radio signals from Amsterdam while flying over London. So, how does that work in practice?
From what I understand, you’d have your CDI set to GPS for most of the flight, following the route in the flight plan. Then, as you approach the base leg or intercept the localizer, you’d switch the CDI to LOC. Is that correct?
If you have any recommendations for a good tutorial on this topic-or if you could create one yourself-that would be awesome!
This would be amazing I hope we get this support in future but you can do this with a navigraph subscription with navigraph charts app on iPad. Not sure if you like me to do a tutorial about it.. There is also a g1000 ipad app that you can get from and you can choose between the PFD side or MFD side where you can access your route. I could also do a video on that also. Regarding the CDI I think the aircraft programmed the Luton localiser by default for the take off. Not sure what was going on there, but yes on approach you switch from CDI to LOC. would you also like me to do an ILS landing tutorial in the Cessna ?
@ Since the route planner is already built into MSFS, and I’ve never used Navigraph (mainly because I’m a beginner and playing on Xbox), I think I’ll stick with what I’ve got for now. The EFB flight planning seems decent enough for my needs.
The reason I was asking about CDI and GPS/LOC is that I just passed the Instrument Rating exam in MSFS2024 Career mode. Honestly, the exam was a breeze compared to all the training sessions-especially VOR, RNAV, and ILS. Now that I’ve moved on to VIP charter flights, I’m realizing I still have a lot to learn!
During one flight, the GPS flight plan worked okay, but when I switched to LOC, it seemed way off-I wasn’t sure where it was taking me. Thankfully, the skies cleared, and I managed a visual landing after improvising a crosswind pattern when I realized I was way too high to land properly.
ILS approaches, long-distance navigation, and using autopilot are all pretty new to me since I didn’t dive too deep into MSFS2020. So, I’d definitely say I’m still a complete beginner and eager to learn more so I can follow best practices and improve my flying skills!
@@Operaatoorsthe features in the efb are more than enough for anyone to learn I even think less people will have a need for navigraph now. Also if you active the approach on the g1000 it should switch from CDI to LOC when you reach the first approach waypoint. That’s what happens in real life it should be simulated also. If you don’t know how to do that I will make a future tutorial on this.
@@OzzySafa the tutorial for this end phase would be very great! I think that MSFS tutorials does not cover it, or I haven’t got so far yet. Either way, this would be really nice :) Thanks
Pop out the EFB and send it to the IPAD connected via Duet or Spacedesk.
Great video.
When modifying your IFR flight plan in the EFB mid-flight and clicking "File with ATC", does this work for you? No matter what I do it seems to continue giving vectors for the previous flight plan. Most likely a bug, but could also be user error. Moreover, it seems that the approaches, arrivals and departures on the EFB differ quite significantly from the ones available on the G1000/3000.
Cheers
Yes most definitely a bug.. I think fixing the bugs on the EFB is highly requested by the community in the forums. I know we are having a patch on the 9th December. I will try modify my flight mid flight and let you know what happens
Please finish off the tutorial videos on the a320
Wow. SUBSCRIBED.
Thank you! Very understandable.
Any idea why Im not getting any weather and no maps from the airports when I choose routes in the EFB ?
I very much would like to check out the ILS landing or RNAV or RFP 😅
Ah this is a bug it has happened to me before also. I think we just have to wait for future updates but sometimes it shows
Thank you so much!!!
I got you
Great video, but how do you transfer the efb to MCDU on a a320?
I will look into this. The thing is the default Airbus v2 by inibuilds uses its own efb different to asobo and the only way I know so far is to use simbrief which is a free. I do have another tutorial that shows you how to create a flight plan on simbrief that intergrates with the asobo efb which you can open using the toolbar. This might be of help.
th-cam.com/video/SzeUzWxLnLs/w-d-xo.htmlsi=d5pSs954du63MBLW
Watch this one 2nd: th-cam.com/video/MfsMUpFwH4Q/w-d-xo.htmlsi=bYxUyktHMNdc8bvS
Thanks for your comment, yeah I was curious because you sync your plan through the McDu on A320. Seems a shame not sync a plan from fs24 efb.
@ if I find out a way I’ll let you know
Great job. Too bad the efb isn't working for the controller. It won't let you select the airport. Guess you need a mouse
I’m sure they will have this patched soon. There are many reported bugs with the efb that are on a priority list to be fixed.
Hello friend, thks for the video, so now inthe fs2024, we don't need navigraph anymore ? what about airacs friend, how to update them then ?
Airacs are the original ones (hence of the same quality as Navigraph's) and are updated at the same time as the original ones.
We only can hope, that companies like Fenix and Pmdg finally untie their business relationship with Navigraph und start using the default free airac cycles. Anything else would be a slight against the flightsim community.
@@FTStratLP Thks friend
I’ll still keep my subscription I prefer their charts and I love their iPad app which shows where my aircraft is when I have it next to my monitor. If asobo made an efb iPad app I’d be all for it.
Can you send the flight plan to the Fenix FMGC?
I’ve not got the fenix but I know it can be imported from sim brief into the mcdu
Have you noticed that the magenta lines on the G1000 and the EFB don’t match.
At 16:27 I started a new flight without a plan because I forgot to mention the check list. After that part the magenta lines all matched fine with the original flight.
Great analysis, thank you! A bit off-topic, but I wanted to ask: I have a SafePal wallet with USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). How can I transfer them to Binance?
you cut the video once you loaded the game after you created flight plan that plan wasn't on avionics 17:07 and then all of the sudden after you cut the video at 17:10 flight plan is there so wtf dude?
Yes I did haha you have a good eye. I had reloaded a blank flight plan after the flight because I forgot to talk about the check list. But I put that into the part of the video before I go over the avionics flight because most people start off cold and dark but it was all recorded after the main tutorial. I went back to do that part again.
@@OzzySafa but the thing is I came here to figure out why my flight plan is not loading to avionics because it's empty once I start the plane. And no matter how many times I click send to avionics it's not there avionics is empty.
@ you’re not the only person this has happened to. Someone else on my comments had this issue. Make sure you file with atc first and then click load to avionics. If not try a different flight from somewhere else as I know there are many bugs to do with the efb. Let me know if you’re able to try another flight.
@@OzzySafa Yeah I'm not doing this for the first time you talking to a mfs20 vet with over 2k hours 😁😁 but yes in mfs 24 so far I had no luck with loading flight plan from EFB to any aircraft in the game. I just stopped playing 4 days ago.
@ ah I see. Let’s hope for your sake after the 9th December that they patch it up
shit doesnt work in VR with addons like fenix ...
Ah shit, I'm disturbed ;)
Would be great if EFB can be ported say to another deice such as an IPAD
I bet navigraph is pissed