Shaboardz Airless Rubber AT Wheels - Killer Pneumatic Wheels Alternative!
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- If you get "range anxiety" while using Pneumatic All Terrain wheels on your ESK8, because of flats and such, these wheels are not only a great alternative, but they look sick too! Shaboardz is in Canada, but it was no problem getting them here in the US. Let's take a ride and get my impressions!
Don't forget you can hit that THANKS button below the video to support the channel!
If you're interested in these wheels, or the other cool stuff Shaboardz has in store for you, check em out here…code “vaportrail” for a discount! bit.ly/ShabWhe...
Please click the following link to check out the Hurricane, and the other boards / accessories they offer. It is an affiliate link, and a small percentage of purchases will go to support this channel, but you won't pay any extra, plus code: TB10 will get you a little discount:
Meepo Hurricane
bit.ly/3FhsRr8
If you're interested in the helmet I wear, you can click the link below. Code TonyB will get you and extra 5% off:
bit.ly/3GAMco6
If you're in the market for killer lights for your bike, or other activities (estate, helmet, backpack...anything!), check out ShredLights here (Use my code for 10% off: TONYB10):
shredlights.com?aff=273
RiderBag us a great backpack for high visibility and functionality for riders! Code "TonyB" will get you a 12% discount (should show up automatically if you use my link below, or use the code if it doesn't). You can find more info here:
bit.ly/3JUoBkn
If you'd like to send a tip to help support the costs associated with this channel, please use my PayPal link: www.PayPal.Me/tonybrittan
Many thanks for watching the channel! I'm very humbled by your support over the years, and I hope you enjoy the addition of this content to the channel. Growth is always good!
I ride my shaboardz every day its not pissing rain ....Ryan's became a riding buddy and his customer service is the best I've ever seen in any business
He’s a really good guy. Had a nice long phone convo one time. Thanks for watching! 😃👍🏻
Hi do you know meepo cyclone wheels can fit to shaboardz?
These boards with the all terrain wheels look like a lot of fun, hard wheels do too, but to not worry about pebbles & cracks would be worth the upgrade.
Yea, exactly! Sorry, just saw your comment. Thanks for watching! 😃👍🏻
Great review wish I could afford one of the boards hopefully one day would love to shred around the neighborhood
So much fun!
Hey I just ordered a pair of these since I’m tired of getting flat half way trew my ride with pneumatic and I am looking forward to ride these wheel hot them in hot pink as well
Yea, I think you’ll like these! Thanks for watching! 😃👍🏻
Well , not interested on the theme but very nice to watch and I guess that's a major compliment when no matter what's the subject people enjoy your videos 👍
Thank you 🙏🏻 I appreciate your support 💯 Once I fell into the emobility rabbit hole, it was like any other thing I have passion for, so I’m happy that it may expose others who aren’t familiar with the content to something they may end up enjoying! Thanks for watching! 😃👍🏻
Looks soo Comfyy!
It really is! Thanks for watching! 😃👍🏻
That's quite the game changer. Now what is the longevity of the wheels. Usually there's a trade off. Like getting stuck and skidding on a stone or a pebble. LOL few years on and off but I was die hard core BMX and freestyle.
I feel ya there! Hard to say what the lifetime of the wheels will be, and speed and range are about the same as the pneumatic wheels, if that helps any. Thanks for watching! 😃👍🏻
What is the comfort level on these vs pnuematics? and vs cloudwheels? THx great vid.
Dude, they’re actually super comfy. As comfortable as my pneumatics IMHO. The CLOUDWHEEL Rovers are nice too, but I’ve just started riding them. I have some for the Hurricane, but haven’t installed yet as I’m using them on the Exway Atlas. Check the video I did on those too.
Hi can you plz help me? Is meepo cyclone wheels can fit to shaboardz v3?
The Summit v3? If so, then yes, they should be great on that board! Thank you for watching 💯
Hi, can someone please tell me if the wheels themselves use standard skateboard bearings (they should have ‘608’ written on them somewhere). The website says that the bearings have a 8mm inner diameter, but I can’t seem to find anything out about the outer diameter. I can’t really tell from any photos online, but they look a little bit bigger. I wish to use them with a kick scooter and standard sized bones ceramic bearings. Thank you so much , I really appreciate it :)
I get the confusion. They are in Canada, and sometimes it has a bit of cross translation. They use standard size bearings. Anything for a standard board, like Zealots or Reds, are a perfect fit. Thanks for watching! 😃👍🏻
@@VaporTrailChannel Thanks for the reply, I appreciate it. That is great! I'm very pleased to hear that about the bearing size. Also, thank you for making all the great content, I enjoy it and have watched a lot of your videos because they are very informative . :) .
Bro if you had to choose between those and cyclone 165 , what would be your choose as concerns comfort???
Being perfectly honest, for comfort, these are hard to beat. But the tread on the cyclones will likely last longer, and they’re probably more comfortable
Thanks for watching! 😃👍🏻
I just grabbed a set of these thanks for the suggestion did you use the belts included? I noticed the tension is awfully tight just wondering if thats normal or if i can use a slightly longer belt so i can have a lil bit more slack.
As long as the belt reaches the motor, and the teeth fit into the pulley, you should be fine! They sent me two sets of belts with mine. I used the 335-5mm. Thanks for watching! 😃👍🏻
What about raining days?Can I still use it?
Some people will ride ESK8's in the rain, but I don't. There's just too much that can go wrong with the ride alone (slippage, etc). But the real big deal is that these boards aren't IP6X protected, and can really only withstand small splashing, etc...then the board has to be completely cleaned and dried immediately after you get back. Bearings, bolts, motors, and electronics/batteries do NOT like to get soaked. My answer is no, but some will tell you go ahead! Thanks for watching! 😃👍🏻
How long did it take to deliver?also what’s the size of the wheels?
My Hurricane took 3 weeks to deliver. It was not the air delivery. These wheels are 6” and the set with pulleys and belts is $199. They took about a week to deliver from Canada. Thanks for watching! 😃👍🏻
How are the wheels holding up?
@@ballinboy0911 still goin strong! I have the Cloudwheel Rovers on my Atlas, and like these better for comfort.
they look exactly the same as the flipsky honeycomb 150 mm hahhaha check it !
Very close. May be a tiny bit of difference. Either way, Flipsky only has black and maybe grey. If you want more colors, Shaboardz has em! Thanks for watching! 😃👍🏻
Im guessing these wouldn't fit on matrix ii axels right
They should fit any standard sized skateboard axle. Thanks for watching! 😃👍🏻
That's good to hear! I just got an e-skate (longboard) and the thought of going ass-over-tea kettle from a random chunk of gravel on asphalt at high speed is concerning with standard urethane wheels. The added benefit of comfort is very appealing as well. I'd assume the swap is universal for just about any e-(long)board with your standard 90mm PU wheels
@@b.thompson9176 if your board is a belt drive (and some direct drive) board, yes. If it’s a hub drive board, most likely they won’t be for you. Thanks for watching! 😃👍🏻
Right on! It's a belt drive so it looks like we're good to go. I was also concerned about any added strain on the motors given the added diameter of wheels but I suspect that's pretty negligible if I'm not taking off from a stand-still
@@b.thompson9176 When you buy them you will typically tell them what board you have and they'll send pulleys that are suited for it if what you have already isn't going to be good.
Poorly made product. I received 4 bents wheels. And now I have to pay to send it back.
I saw your post on Facebook groups, and while I appreciate your frustration and concern, I agree with the large percentage who thought the example you showed was closer to "normal" for wheels of this type. I personally love them, even though when spinning the wheels while under no load, they may have a slight wobble to them, most wheels do, and this isn't something to be concerned with. Even my higher end CNC rims have some slight deviation to them. That said, if you aren't happy, certainly return them. Many companies request that you pay for shipping when you want to return an item, so yea...I can see that. Either way, I do appreciate your opinion and that you shared it here. Thanks for watching! 😃👍🏻
@@VaporTrailChannel Maybe this slight unbalance and wobble is normal for that type of wheel, but for me it's a no go. I don't understand why no one ever mentioned this before. I keep thinking the set I received is faulty. Otherwise it wouldn't sell. You can't spend this much money and be happy about your board vibrating and wobbling like that. What would be the advantage of a big wheel that is less comfortable than a street one anyway ?
@@wahwahvince I don't feel any sort of wobble or difference when actually riding on these than I do with the pneumatics that I had on the hurricane previously, and the other board I have them on came with them, so I can't really "compare" those to anything else on that board as I haven't changed them out. I suppose that it's each riders perspective and choice when it comes to wheels. But I personally didn't have any problem with them, and enjoy riding them. I can tell you that the grip definitely improves after riding them for a while and wearing them in...as I also saw you commented on that. If you've ridden any variety of wheels, you'll notice that they all have their strong and weak points. Clearly these wheels weren't for you. I hope you can find something that works great for you and you feel secure with. You may have to look into come custom CNC wheels, but keep in mind that many of those cost upwards of $250-300 just for the "wheels" (aka rims / hubs), and you'll still have potential issues with balance on them. As long as your wheels aren't so off balance that it completely throws you off your board, it's pretty normal to have some variances in "wobble" when you run them without a load on the board. Bottom line is that if they don't work for you, they don't work for you. And that's totally understandable. Also, thank you for being civil and stating your feelings and thoughts on this. Sometimes people get really pumped up and mean when they're discussing things like this on social media. Appreciate you being an adult 🙂
Before this, I thought all e-skate wheels were airless lol. They look cool.
Yea, we use a lot of Pneumatic wheels in esk8, but there's still a ton of urethane wheels out there on em. Thanks for watching! 😃👍🏻