Looks seemingly like its the most complete, well designed & torquiest wheel BG has ever made. I like it, alot. Love that your 'review' isnt just an unboxing & quick ride but instead, some of the fellas here have been riding it for quite a bit, hence real indepth ride experiences. Will be awaiting the obvious direct comparo btwn the X vs A. Good job guys
As a euc rider who's from Tamil Nadu, I was baffled to see an euc in a tamil movie. The movie was bad. If the movie had a better story, there would be tons of people getting into euc in India. My friends and family recognised what an euc is and got reminded of me instantly when they saw the movie. Thanks for doing a good job in the movie guys. The movie being so bad isn't your fault! The stunts were a bit too much. But hey, that's how indian movies are.
One list that would make the Xway (same applies for the Blitz) better: Normal bored shock absorbers with replaceable bushings. The size of the ear in the shock absorber is 12.15 on both sides, while the axles are only 12 mm, with each bump you feel how the shock absorber dangles on the rods, slender and creating a feeling of play on bumps and obstacles. Also, it does not have any bushings and wears out the holes, which means that over time the play increases until the shock absorber wears down the axle or ear. At the moment, the solution is to drill the ear to a size of 14 mm and install bushing 14 by 12 mm, I would like Begode to come to this already, since this is the standard for any shock absorbers, even the cheapest ones for $30. I would like good fluid in the shock absorber. At the moment, the shock absorbers are filled with L-CKD100, this is an anti-corrosion liquid for industrial pipes and compressors, it is very viscous and changes its properties dramatically in different temperature conditions, not to mention cavitation. I would like to replace the liquid with a shock absorber liquid with a viscosity of 5-10W. I would also like the o-rings under the stems and under the rebound knobs to stop being overtightened and the shock absorbers to stop leaking, for this it would be nice to standardize the force for tightening these units, which is not the case at the moment. The most desirable thing would be to finally install seals on the sliders and switch to wet sliding, because it is weird to discuss an off-road wheel with an open slider system, with any dusty or dirty ride the slider system gets clogged with sand, dirt, or starts working much worse, or completely stops working until the wheel is reassembled. We have been asking for seals for 5 wheel models already, but Begode continues to produce dry sliding, despite the fact that the pipes have become softer than the old steel ones and they scratch and fail much faster as part of the sliding mechanism. It would be also a good idea to replace the 1mm thermal pad on the controller with a 2mm one or install two 1mm pads, since the average area of contact between the board and the heat sink is only 20-30%, the wheels start to overheat in the heat, which has also been shown many times, but nothing has been done. Here is a short list of what could make the X-Way a really good wheel.
What material do you think would be good for putting bushings like that? My xway is super crazy loud from the suspension after just a few hard offroad rides.
4:50 from everything I have seen this adjustable travel height feature is not available on the production models so the wheel is stuck at 130mm travel. Great video ❤ My Xway will be here soon!
Would love to hear your thoughts about the X-way vs the Lynx. I've got a Lynx, but I'm really curious about the possible weight savings with the 2400wh version of the X-way. Thanks for the great video!
I have a Lynx also and in addition to that I absolutely love my 2400 W hour V 14. I also like the suspension better for off roading, as the suspension on the Lynx is wonderful but it's a little bit too buttery for me off road.
@@Loki-rascal That'd be a really fun trio of wheels to ride side-by-side! When I was looking into the Lynx, I was really tempted to go with the V14 as well. For that matter, it would be fun to even try the 2400wh X-way alongside the Begode Blitz. I know the Blitz is designed a bit more for the onroad side of things, but I was surprised to hear that Wrong Way even prefers it over the Lynx for offroad jumping. I love my Lynx, but I can tell I'd love it more if it were even lighter and easier to throw around. With my luck, I'll finally snag an X-way and then Leaperkim will come out with a Lynx Lite that has a smaller battery;).
Idk if you'll look at this comment but There's a scooter i have thats comparable to The Emove roadster and stuff a little bit slower then it and is Less then both scooters in this video, I have the yisuntrek r8 It has about 2300w nominal for each motor And an absolute maximum of 11kw i have the 72v100ah 10,000w version but i did a personal test and had the manufacturer test it and is 5500w max per motor, you also have to ask yisuntrek specifically for the 10kw version since is not an option on the r8 thing but is a great option It can also have add ons i have the road version so it comes with 13x5-7 inch tires it can come with a steering damper but i personally dont think it needs it Nfc Screen with an app Thats very customizable And it cost Less then 2700usd if you have every option but i paid 2582usd for mine I did a range test at an average speed of 45mph and did 75 Miles of range it took all day for me to do Mine currently has 2k miles nothing has given up yet 1 year warranty i dont have like a gps or anything since i Cant afford phone service But my top speed i hit on 3 different occasions was 70-85mph and i tested it with a buddy in a car on a Pretty flat smooth highway so if your talking about budget king i personally think the yisuntrek r8 is undefeated
Easy maintenance? Have u seen the tare down of the blitz. That does not look like easy tire change. Was going to buy the blitz but the commander mini is the easiest to maintenance.
Why are we all ignoring the big question. As we watch battery pack prices fall 53% in the last 12 months, I don't see any reduction in prices for the wheel buyer.
Well next time your employer offers you a raise, you should decline, and tell them that you would like to pass the profits onto the customer rather than make a little bit more money for yourself with all of your hard efforts in your career. 😂😂😂
@Loki-rascal I talk about knowing your value, and you respond with assuming I have an employer LOL. The irony, read my comment again, you don't know value or you have none. I take in 100% of my profits
The 134V variant is really not available, Begode already back pedaled on that. Changing tires on Blitz is a lot of work. Honestly this video sounds more like a sales pitch than a review.
wdym "back pedaled"? Lem from Ungerground is gonna receive is batch of 134V X-Ways quite soon, in like a month or so, I don't think they back pedaled on them
@@ggoraa I don't know what is happening with my replies on here but several sources including Wheelgoodtime has said that they will only be available as a special large volume order and not generally available
What R/D is begode doing more than the other ones? BMS(which should be given from start)> KS, Progressive spring>IM, Magnesium>LK. Only thing begode is giving more is money and wheels to riders, and for such a niche of a hobby there is a lot shilling which should stop
The only manufacturer that send us wheels directly is Inmotion. All the other wheels are paid for by the dealers to send to us to review. However, it seems like the BEGODE wheels are the riders choice for racing and off-road terrain. From our observation, the public has pressured the dealers to send more of the BEGODE wheels. In the past we have been extremely critical of BEGODE. We did find their R/D department has been lacking in the past but it seems like they really listened to the public when designing the X-Way. We will be releasing an unboxing and review video soon. We can confidently say the X-Way is the best wheel we have seen come out of the BEGODE factory.
@@RonnieRides From wrongway(annoyed bc lk doesn't talk with him) to them they did a 180 in the timeline out of nowhere, although wrongway shows screws breaking from the xway and still keep seeing a lot of people talking about the great qc this wheel has
@@Pabalhao as a Blitz owner I can confidently say that their build quality has not improved a lot, still all aluminum threads that easily dethread, lots of woodscrews, slim margins on important parts, lots of design shortcuts
Looks seemingly like its the most complete, well designed & torquiest wheel BG has ever made. I like it, alot. Love that your 'review' isnt just an unboxing & quick ride but instead, some of the fellas here have been riding it for quite a bit, hence real indepth ride experiences. Will be awaiting the obvious direct comparo btwn the X vs A. Good job guys
We agree, the X-Way feels like a whole new level
its too tall and too slow. combined with being too expensive for that speed
As a euc rider who's from Tamil Nadu, I was baffled to see an euc in a tamil movie. The movie was bad. If the movie had a better story, there would be tons of people getting into euc in India. My friends and family recognised what an euc is and got reminded of me instantly when they saw the movie. Thanks for doing a good job in the movie guys. The movie being so bad isn't your fault! The stunts were a bit too much. But hey, that's how indian movies are.
One list that would make the Xway (same applies for the Blitz) better:
Normal bored shock absorbers with replaceable bushings. The size of the ear in the shock absorber is 12.15 on both sides, while the axles are only 12 mm, with each bump you feel how the shock absorber dangles on the rods, slender and creating a feeling of play on bumps and obstacles. Also, it does not have any bushings and wears out the holes, which means that over time the play increases until the shock absorber wears down the axle or ear. At the moment, the solution is to drill the ear to a size of 14 mm and install bushing 14 by 12 mm, I would like Begode to come to this already, since this is the standard for any shock absorbers, even the cheapest ones for $30.
I would like good fluid in the shock absorber. At the moment, the shock absorbers are filled with L-CKD100, this is an anti-corrosion liquid for industrial pipes and compressors, it is very viscous and changes its properties dramatically in different temperature conditions, not to mention cavitation. I would like to replace the liquid with a shock absorber liquid with a viscosity of 5-10W. I would also like the o-rings under the stems and under the rebound knobs to stop being overtightened and the shock absorbers to stop leaking, for this it would be nice to standardize the force for tightening these units, which is not the case at the moment.
The most desirable thing would be to finally install seals on the sliders and switch to wet sliding, because it is weird to discuss an off-road wheel with an open slider system, with any dusty or dirty ride the slider system gets clogged with sand, dirt, or starts working much worse, or completely stops working until the wheel is reassembled. We have been asking for seals for 5 wheel models already, but Begode continues to produce dry sliding, despite the fact that the pipes have become softer than the old steel ones and they scratch and fail much faster as part of the sliding mechanism.
It would be also a good idea to replace the 1mm thermal pad on the controller with a 2mm one or install two 1mm pads, since the average area of contact between the board and the heat sink is only 20-30%, the wheels start to overheat in the heat, which has also been shown many times, but nothing has been done.
Here is a short list of what could make the X-Way a really good wheel.
What material do you think would be good for putting bushings like that? My xway is super crazy loud from the suspension after just a few hard offroad rides.
Very good insight!
Thank you father!
Law trusts police a lot more than I do holding his phone/wallet like that lmao.
Lol. Once they see no pistol grip, they stop paying attention
@@lawlaxinaakayourfavorite they shoot people for holding a sandwich, if police actually paid attention I wouldnt be worried lol
🔥 👏🏾 Great video. Love you guys! See you both soon 👍🏾
We appreciate your support!
Thank you Law for saying the seat needs to move up! That's the only thing I really am not happy with on the xway.
Agreed
You mean forward?
best looking most rounded begode wheel to date. i like this new direction they're headed in.
The future is bright!
ok, now I must look up this movie
Ha ha! It’s a banger!
Please don't. Please watch the first one. The second sucks so bad.
@@AishwariyaKrishna is the action just as good in the first movie?🍿
Great video. I love watching Law Laxina ride. He is an absolute magician.
Law is one of the best out there!
Nicely done guys!
Gotta love dove valley!
Our first time!
I need a link for those shoulder holster phone/wallet holder! I have to know where I can find this. :)
Law says you can get it from LDwest.com and you can save an extra $20 off with coupon code: Law
Be aware he apparently lost his phone from the holster at 11:23 in the video.
@@JoeMancini-n9xlol. I was holding it in hand at that point when i dropped it!!
4:50 from everything I have seen this adjustable travel height feature is not available on the production models so the wheel is stuck at 130mm travel. Great video ❤ My Xway will be here soon!
They said this was the production unit but we will reach out to confirm about the adjustable height feature.
2019 msx 100v was my first wheel too. When the veteran Sherman came out its build quality was way better
Progress
🤙🏽⚡️🤟🏽⚡️👌🏽
*a Uni in a Bollywood movie, wow!* 😂👌🏽👏🏽👏🏽
I thought “ off road mode” was more snappy? Certainly on the et max off road feels like more torque than race mode.
Offroad is a stiffer initial feel, but race mode gives you the initial easy lean, but still returns quickly
sage like advice on the kydex sheet with pads
Would love to hear your thoughts about the X-way vs the Lynx. I've got a Lynx, but I'm really curious about the possible weight savings with the 2400wh version of the X-way. Thanks for the great video!
I have a Lynx also and in addition to that I absolutely love my 2400 W hour V 14. I also like the suspension better for off roading, as the suspension on the Lynx is wonderful but it's a little bit too buttery for me off road.
@@Loki-rascal That'd be a really fun trio of wheels to ride side-by-side! When I was looking into the Lynx, I was really tempted to go with the V14 as well. For that matter, it would be fun to even try the 2400wh X-way alongside the Begode Blitz. I know the Blitz is designed a bit more for the onroad side of things, but I was surprised to hear that Wrong Way even prefers it over the Lynx for offroad jumping. I love my Lynx, but I can tell I'd love it more if it were even lighter and easier to throw around. With my luck, I'll finally snag an X-way and then Leaperkim will come out with a Lynx Lite that has a smaller battery;).
Looking good 👍
🤙
Idk if you'll look at this comment but There's a scooter i have thats comparable to The Emove roadster and stuff a little bit slower then it and is Less then both scooters in this video, I have the yisuntrek r8 It has about 2300w nominal for each motor And an absolute maximum of 11kw i have the 72v100ah 10,000w version but i did a personal test and had the manufacturer test it and is 5500w max per motor, you also have to ask yisuntrek specifically for the 10kw version since is not an option on the r8 thing but is a great option It can also have add ons i have the road version so it comes with 13x5-7 inch tires it can come with a steering damper but i personally dont think it needs it Nfc Screen with an app Thats very customizable And it cost Less then 2700usd if you have every option but i paid 2582usd for mine I did a range test at an average speed of 45mph and did 75 Miles of range it took all day for me to do Mine currently has 2k miles nothing has given up yet 1 year warranty i dont have like a gps or anything since i Cant afford phone service But my top speed i hit on 3 different occasions was 70-85mph and i tested it with a buddy in a car on a Pretty flat smooth highway so if your talking about budget king i personally think the yisuntrek r8 is undefeated
I have a superfast scooter, and ever since I learned how to ride an EUC my scooter sits. 😂
This movie looks amazing
Really? I thought it looked horrible, just from a few clips.
Lol. The first one was infinitely better, but the second was worth the time just to see an 80 year old guy steal an electric unicycle from a child
Folks ridin' the X-Way being like "I wish it was lighter"
The Blitz is over here like :'(
Easy maintenance? Have u seen the tare down of the blitz. That does not look like easy tire change. Was going to buy the blitz but the commander mini is the easiest to maintenance.
Tear
We are trusting Seth's opinion since he is the one who works on the EUCs locally in Colorado.
you mean more leaperkim like? why cant wheel reviews use other wheels as comparrison?
We can compare the Lynx to the X-Way in our full review.
Why are we all ignoring the big question. As we watch battery pack prices fall 53% in the last 12 months, I don't see any reduction in prices for the wheel buyer.
Supply and demand. Know your value, why lower the price if biz is good? You don't run a biz 100%
Well next time your employer offers you a raise, you should decline, and tell them that you would like to pass the profits onto the customer rather than make a little bit more money for yourself with all of your hard efforts in your career. 😂😂😂
@Loki-rascal I talk about knowing your value, and you respond with assuming I have an employer LOL. The irony, read my comment again, you don't know value or you have none. I take in 100% of my profits
Let’s goooo
X-Way is so confusing... I thought Exway (Esk8 company) was making EUC's now 😂
I thought the exact same thing the first time I heard about it.
Hot and cool water.
Who is hot and who is cool?
@@freshlycharged that suspension settings lol) blue for cold, red for hot water, usually.
The 134V variant is really not available, Begode already back pedaled on that. Changing tires on Blitz is a lot of work. Honestly this video sounds more like a sales pitch than a review.
wdym "back pedaled"? Lem from Ungerground is gonna receive is batch of 134V X-Ways quite soon, in like a month or so, I don't think they back pedaled on them
@@ggoraa that's what I heard and something said by WheelGoodTime (Rob) that it will not be generally available
@@ggoraa I don't know what is happening with my replies on here but several sources including Wheelgoodtime has said that they will only be available as a special large volume order and not generally available
@@RonnieRides so? If a Us retailer buys a bunch what is stopping them from reselling them?
@@justsomeguywithahugepens8940 we will see how it plays out
fabolous
pads are fuggin stolen, thats why they are better
Who are they stolen from?
@@freshlycharged grizla obviously
What R/D is begode doing more than the other ones? BMS(which should be given from start)> KS, Progressive spring>IM, Magnesium>LK. Only thing begode is giving more is money and wheels to riders, and for such a niche of a hobby there is a lot shilling which should stop
The only manufacturer that send us wheels directly is Inmotion. All the other wheels are paid for by the dealers to send to us to review.
However, it seems like the BEGODE wheels are the riders choice for racing and off-road terrain.
From our observation, the public has pressured the dealers to send more of the BEGODE wheels.
In the past we have been extremely critical of BEGODE. We did find their R/D department has been lacking in the past but it seems like they really listened to the public when designing the X-Way.
We will be releasing an unboxing and review video soon. We can confidently say the X-Way is the best wheel we have seen come out of the BEGODE factory.
@@freshlycharged When you say begode, I think you mean american public. But I will be waiting on what the x-way did new when designing it
@@freshlycharged ok now this really sounds like paid advertisment
@@RonnieRides From wrongway(annoyed bc lk doesn't talk with him) to them they did a 180 in the timeline out of nowhere, although wrongway shows screws breaking from the xway and still keep seeing a lot of people talking about the great qc this wheel has
@@Pabalhao as a Blitz owner I can confidently say that their build quality has not improved a lot, still all aluminum threads that easily dethread, lots of woodscrews, slim margins on important parts, lots of design shortcuts
Hahahahaha gay
Begode needs a name change. Sounds like the name of a health problem.
They already changed from Gotway. Maybe third times the charm. 🍀 😂
sounds like a planet in far away galaxy!!!