Set screws. The only vid I have seen discussing that issue.My set screw (after a year of operation) backed out. POM wheel and belt adjustment did not solve the problem. My problem, for now, solved! Ortur LM3..very hard to get to the set screws... Thanks very much for this video.!!
Seriously the best video I've seen to help answer questions I didn't even know I had! Spent the last 2 days emailing to try and find out how to get started!! Thank you so much!
thanks for the reply...I believe I found the problem...the belt wasn't properly seated on the coupler rod...now it is cutting correctly...thanks so much for this video and responding to me! It's been a couple of tough days!!!!
OMG! Pete!!! (we are in the same group BTW) You probably just saved my machine. The description of the COUPLER for the Y side...keeps literally falling off. Now I'm extremely new to lasers. And there is no where in the manual that even comes close to what you are doing. The FLAT side....good grief..didn't even know that it existed in that corner. I tighten my set screws very tight, but if I'm still on the round...it won't hold long (mine didn't) and I've had this machine for 3 1/2 months made zero, burnt through some wood, had issues with crashes. Figured the crash out (not all things from China are "measurement "correct) AND thanks to you...my Y side will be solved. Personally, XTOOL should PAY you to demonstrate actual assembly of the D1. Thank YOU!!!!
Thanks! I'd LOVE to do an unboxing and assembly video, because that's REALLY when all of these things should be done correctly. @XTool send me a D1, I'll do a series of unboxing and assembly videos showing all of the things to check, and then I'll donate the D1 to my local middle school. Call me!
I’dve been just as long winded. If not, something could be unclear or left out completely. Good video. Nice to have a step by step to follow. As many times as I’ve gone through this process, it’s easy to get distracted and not do a thorough job. I used to have issues with the gear above the x stepper dropping down. There’s a certain measurement that needs to be. That’s all I’d add. Interested in seeing your other videos on this machine and 3D printing if you have any. I have the Anycubic Vyper, it’s actually running right now.
Thank you so much! I've been beating my head against the wall and have given up on my laser for a while. I found this video and hopefully this will do the trick to fix all the issues I'm having. I'm also going to get the handled Allen wrenches like you suggest as I think it will make this so much easier to work on.
I get like a locking problem with my X axis. the belt will hit what feels like a barrier and i get a knocking sound and it knocks it out of place. If I loosen the belt it goes away but then I get a shit burn. I have had my machine for 5 months or so now. it just started doing it. Any ideas on what I can do?
Ive gotten double lines due to residue build up on the underside of the x gantry (on the silver rod that the laser track wheel runs on). The gunk inhibited the laser module from smoothly
Thank you so much, I am also in the same fb group, but hadn't seen my problem in there before. My axel as you called it, is just popping out of the hole while its running. Its done it twice now. I've been using my laser consistently since around September and hadn't had this issue until this past week. I'm going to check all the things you mentioned in your video and see if that helps.
Do you have any pictures of a stepper motor? I know you were trying to show us, but besides the white coupler screws, I could not see anything back there.
Hi Pete; first of all, thanks for the tutorial. I have had my xTOOL D1 Pro for a little over a week; and for getting better acquainted, in the Laser tab I always use "Current Position" so I would like to know if it is possible to use "Homing" in that function or is it only in Absolute Coordinates. And how can I configure Homing on this machine. Thank you
My XTool is suddenly stopping on its own, with the laser shutting off at the same time. I have the 5watt, could this be from over heating? I need the machine for Christmas gift making. I'll be checking my gears and belts, thank you for your video.
Hi Pete...having problems with cutting on my X tool D1...cannot complete a perfect circle...I've made all the adjustments in this video and still not completing a circle, therefore all my cuts are off. What can I do? I have orders I need to fill! HELP!
I have some play in my gantry, I've adjusted the gantry since it was 3.5mm off. What would cause it to go over an X and not be able to go over the same diag line. I did it 3 times and each line was about a mm to a half mm off? I hope that makes sense.
I got the xTool D1 pro with the 5w and just upgraded the laser model to the 20w. Now the when the gantry is homed (to left when “XTOOL” is bottom left), starting a run, the motor tries to run more to the top and right. It is acting like it started from the bottom left and ran out of room. This happens in lightburn, I do not think it happens in creative space. Both sometimes hit the limits without actually physically hitting the limits. I am relatively new (2 months) any suggestions
Pete, I'm a new user and I just got the xtool D1, I'm having a problem with the laser belt, the tension is good but it's not moving the laser properly, any advice on that?
My d1pro powered off mid job a few days ago and no will not turn on at all apart from the odd occasion where it will power on for about a minute before shutting down. Anyone else have or know about this issue as I cannot find anything on the web for this problem.
Start with motion - check the belt, is it properly tensioned, is it attached to the carriage properly, does the carriage move smoothly, are the drive pulleys on the stepper motor properly tightened (2x grub screws), does the stepper motor axle turn by hand. If it passes all that, check signal path/wiring from the X motor back to the motherboard. Make sure there isn't a cut, break, or crimp in the cable all the way back to the motherboard - if you have an ohmmeter, check continuity from one end of the wire to the other. Are the connectors (motherboard and stepper motor) properly connected.
My xTool d1 pro just started burning ellipses instead of circles (in my design). I have checked belt tension, squareness of frame à well as gantry. Updated firmware. Still burning ellipses. Any suggestions?
oh wow, thought i had broken my machine, buti followed your instructions for tightening everything, and its working perfectly. Thank you so much.
Good to hear.
Set screws. The only vid I have seen discussing that issue.My set screw (after a year of operation) backed out. POM wheel and belt adjustment did not solve the problem. My problem, for now, solved! Ortur LM3..very hard to get to the set screws... Thanks very much for this video.!!
Glad it helped!
Seriously the best video I've seen to help answer questions I didn't even know I had! Spent the last 2 days emailing to try and find out how to get started!! Thank you so much!
Glad it helped!
thanks for the reply...I believe I found the problem...the belt wasn't properly seated on the coupler rod...now it is cutting correctly...thanks so much for this video and responding to me! It's been a couple of tough days!!!!
OMG! Pete!!! (we are in the same group BTW) You probably just saved my machine. The description of the COUPLER for the Y side...keeps literally falling off. Now I'm extremely new to lasers. And there is no where in the manual that even comes close to what you are doing. The FLAT side....good grief..didn't even know that it existed in that corner. I tighten my set screws very tight, but if I'm still on the round...it won't hold long (mine didn't) and I've had this machine for 3 1/2 months made zero, burnt through some wood, had issues with crashes. Figured the crash out (not all things from China are "measurement "correct) AND thanks to you...my Y side will be solved. Personally, XTOOL should PAY you to demonstrate actual assembly of the D1. Thank YOU!!!!
Thanks! I'd LOVE to do an unboxing and assembly video, because that's REALLY when all of these things should be done correctly. @XTool send me a D1, I'll do a series of unboxing and assembly videos showing all of the things to check, and then I'll donate the D1 to my local middle school. Call me!
this saved me! Coupler on the motor was loose - I tried a full day fixing a problem and didnt check that! thank you so much
Thank you. I just got mine assembled. I’m going to go back and check all the things you went over in this video.
I’dve been just as long winded. If not, something could be unclear or left out completely. Good video. Nice to have a step by step to follow. As many times as I’ve gone through this process, it’s easy to get distracted and not do a thorough job. I used to have issues with the gear above the x stepper dropping down. There’s a certain measurement that needs to be. That’s all I’d add. Interested in seeing your other videos on this machine and 3D printing if you have any. I have the Anycubic Vyper, it’s actually running right now.
Thank you so much! I've been beating my head against the wall and have given up on my laser for a while. I found this video and hopefully this will do the trick to fix all the issues I'm having. I'm also going to get the handled Allen wrenches like you suggest as I think it will make this so much easier to work on.
I get like a locking problem with my X axis. the belt will hit what feels like a barrier and i get a knocking sound and it knocks it out of place. If I loosen the belt it goes away but then I get a shit burn. I have had my machine for 5 months or so now. it just started doing it. Any ideas on what I can do?
Ive gotten double lines due to residue build up on the underside of the x gantry (on the silver rod that the laser track wheel runs on). The gunk inhibited the laser module from smoothly
Thank you so much, I am also in the same fb group, but hadn't seen my problem in there before. My axel as you called it, is just popping out of the hole while its running. Its done it twice now. I've been using my laser consistently since around September and hadn't had this issue until this past week. I'm going to check all the things you mentioned in your video and see if that helps.
Do you have any pictures of a stepper motor? I know you were trying to show us, but besides the white coupler screws, I could not see anything back there.
Thank you sir! I couldnt find a video this good!!!
Hi Peter, How do we fix the rack problem ive got that issue?
Hi Pete; first of all, thanks for the tutorial.
I have had my xTOOL D1 Pro for a little over a week; and for getting better acquainted, in the Laser tab I always use "Current Position" so I would like to know if it is possible to use "Homing" in that function or is it only in Absolute Coordinates. And how can I configure Homing on this machine. Thank you
Great video and explanation! Cleared things up for me and made the maintenance and troubleshooting easy. Blessings
Glad it helped, Edgar.
My XTool is suddenly stopping on its own, with the laser shutting off at the same time. I have the 5watt, could this be from over heating? I need the machine for Christmas gift making. I'll be checking my gears and belts, thank you for your video.
Very helpful video! Thanks Pete
Thanks for the cool maintnance tip! Good informative video! I have subscribed!!
‘Math is hard’ says the man in a MIT shirt. 😁🤙🏽 greetings from the S. Shore.
The metal rod started bouncing around. Trying to fix that
Our Lazer only moves forward and back when framing. Do you know how to fix this issue? Can you help me
how to fix the XTool software framing button not moving the laser to check the area of the engraving job?
What do I need to get to engrave on jewerly?? What about the laser tree modules??
Thank you a ton! It fixed my skipping problem.
Glad it helped!
Thanks for the video. It really helped me out troubleshooting my problem.
Hi Pete...having problems with cutting on my X tool D1...cannot complete a perfect circle...I've made all the adjustments in this video and still not completing a circle, therefore all my cuts are off. What can I do? I have orders I need to fill! HELP!
Double check the grub screw on the Y axis stepper at the right rear of your machine.
Where and when should we put the lubricant that comes in the package? The "peng sheng"
A light dab along the rails.
I have some play in my gantry, I've adjusted the gantry since it was 3.5mm off. What would cause it to go over an X and not be able to go over the same diag line. I did it 3 times and each line was about a mm to a half mm off? I hope that makes sense.
Love you Mr Ruck
Thank you! Fixed my issue.
I got the xTool D1 pro with the 5w and just upgraded the laser model to the 20w. Now the when the gantry is homed (to left when “XTOOL” is bottom left), starting a run, the motor tries to run more to the top and right. It is acting like it started from the bottom left and ran out of room. This happens in lightburn, I do not think it happens in creative space. Both sometimes hit the limits without actually physically hitting the limits. I am relatively new (2 months) any suggestions
Pete, I'm a new user and I just got the xtool D1, I'm having a problem with the laser belt, the tension is good but it's not moving the laser properly, any advice on that?
Looking for a x tool d1 pro x axis motor replacement can u help
My d1pro powered off mid job a few days ago and no will not turn on at all apart from the odd occasion where it will power on for about a minute before shutting down. Anyone else have or know about this issue as I cannot find anything on the web for this problem.
Thanks for the help! You sound like you're also from Philly, right?
Is it that obvious?
Can't figure out why my x1 D1 Pro won't move on the x-axis. Only moves on Y-axis. This is so frustrating
Start with motion - check the belt, is it properly tensioned, is it attached to the carriage properly, does the carriage move smoothly, are the drive pulleys on the stepper motor properly tightened (2x grub screws), does the stepper motor axle turn by hand. If it passes all that, check signal path/wiring from the X motor back to the motherboard. Make sure there isn't a cut, break, or crimp in the cable all the way back to the motherboard - if you have an ohmmeter, check continuity from one end of the wire to the other. Are the connectors (motherboard and stepper motor) properly connected.
My xTool d1 pro just started burning ellipses instead of circles (in my design). I have checked belt tension, squareness of frame à well as gantry. Updated firmware. Still burning ellipses. Any suggestions?
Check the drive gear set screws.
@@PeteRuckelshaus they are set & snug.
Cleaned & lubricated x & y runners.
Calibrated. All good there.
Found it. Recalibrated and noticed "Enable Rotary" was switched to green.... And it should be red (off).
Thx for your time.
There are no flat spots on the shafts. At least mine doesn't.
Our machine only goes forward and back
I despise companies use different size scews and allen fasteners for no reason..