Really helpful. The service manual isn’t as specific as you. Also nervous about taking it apart even though I’m a electronics engineer. I’ll try doing what you did. My issue is when I ran the diagnostic mode I found there is a focus error. I theorized it might be a dirty lens, a weak laser of bad solder joint
Yes sorry I did not do that. Basically the CD arm lights up and most of the time moves to the CD selected but does not spin and pick up the CD. I thrne makes and number of noises as if it is misfiring. All over the B&O forums they will say it is a laser replacement. This is not the case. Just a dam good clean/de-dust needed!
Not sure how you got this spelled wrong, but actual name is not "Band and Olufsen"... The brand is called "Bang & Olufsen" as the founders had the names "Peter Bang" and "Svend Olufsen". I developed some of the software in this CD player.
Can I ask how are the speaker's connected. Is it din in each speaker,? Thinking of getting 9000 mk3 and 6000 speakers but not sure what to buy to connect. Also will 6000 wireless ones work with a 9000 mk 3. Thanks
Many ways to skin a cat…. as your post is 3 years old wonder whether you purchased what you wanted?! It’s an 8 pin din plug to the 9000 - in uk there’s a chap that can supply cables to suit. You can also fashion Bluetooth to the unit.
Good morning! My first CD is stuck and the glass won't open. It appears that the unit is looking for a pin code, but none of the buttons will respond for me to put it in, nor does there seem to be a way to put in the pin code by using the remote. Help! The CD is from the library Best, Jean
I read somewhere you could put a service code in which will allow access for a number of hours - maybe that’ll help in the meantime? Other than looking for a second hand remote I would look to see if there are alternative remotes that could do the job / or program one - but one would have to do some research
Very helpful. I have Beosound 9000 mk3, I normally clean the laser head with cotton stick without removing any part, there is a small gap between the laser panel and upper cover. Could you also show how to replace the laser? Thank you
You're a good man Chief!
Really helpful. The service manual isn’t as specific as you. Also nervous about taking it apart even though I’m a electronics engineer. I’ll try doing what you did. My issue is when I ran the diagnostic mode I found there is a focus error. I theorized it might be a dirty lens, a weak laser of bad solder joint
Man I would have liked to see the issues of what it was doing wrong in the video. However still a great video 👍
Yes sorry I did not do that.
Basically the CD arm lights up and most of the time moves to the CD selected but does not spin and pick up the CD. I thrne makes and number of noises as if it is misfiring.
All over the B&O forums they will say it is a laser replacement. This is not the case. Just a dam good clean/de-dust needed!
Thank you. Brilliant advice. Gareth Clark
Not sure how you got this spelled wrong, but actual name is not "Band and Olufsen"... The brand is called "Bang & Olufsen" as the founders had the names "Peter Bang" and "Svend Olufsen". I developed some of the software in this CD player.
Probably just a typo - he spelled it correctly in the description
Can I ask how are the speaker's connected. Is it din in each speaker,? Thinking of getting 9000 mk3 and 6000 speakers but not sure what to buy to connect. Also will 6000 wireless ones work with a 9000 mk 3. Thanks
@@barbadosbeachhousebuild not all ;-)
Many ways to skin a cat…. as your post is 3 years old wonder whether you purchased what you wanted?!
It’s an 8 pin din plug to the 9000 - in uk there’s a chap that can supply cables to suit. You can also fashion Bluetooth to the unit.
Champ 👍if don’t have remote can replace?thxx
Remote?? what for?
Good morning! My first CD is stuck and the glass won't open. It appears that the unit is looking for a pin code, but none of the buttons will respond for me to put it in, nor does there seem to be a way to put in the pin code by using the remote. Help! The CD is from the library Best,
Jean
I read somewhere you could put a service code in which will allow access for a number of hours - maybe that’ll help in the meantime?
Other than looking for a second hand remote I would look to see if there are alternative remotes that could do the job / or program one - but one would have to do some research
Thank you for posting!
Very helpful. I have Beosound 9000 mk3, I normally clean the laser head with cotton stick without removing any part, there is a small gap between the laser panel and upper cover. Could you also show how to replace the laser? Thank you
All this to clean the lens ¿ 🤔😳🙄😂
Rubbish video camera too close and shaken.