I'm watching & I replaced mine, 2003 oldsmobile bravada about 2 years ago & I didn't take off fuel lines. It was hectic with the back bottom bolts by the fire wall.. Took me about 12 hours, first time. Bout to redo it again in a few weeks. The memories are coming back as I'm watching 😂 the struggle is real
Right... videos I'm posting now, Mann. My truck kicked my azz. To include the one I'm editing tomorrow. Hopefully I can do my garage update video now that I'm done with the truck.
I'm sure you'll be fine. Honestly, I had more trouble with the gaskets for the sparkplugs on the valve cover, so be careful cause the valve cover is plastic and can break. I suggest if they were fine and look good, don't risk cracking the cover and leave them on.
Very nice video. Just removed my alt. Intake, and my back is killing me. Not an easy job. Have to replace valve cover also. Not looking forward to the rest of the job. Thanks again .
Really nice video man! About to do this to mine after I found oil in the #1 spark well causing 1 to miss. Got a new coil for 1 and new plugs for all 6 since I’ll be there anyway… I noticed you removed the ac tube. My ac is currently working. Is that ac line pressurized with refrigerant? Would I have to recharge the system afterwards? Also replacing vvt solenoid and gonna try to clean out the pcv tube with some carb cleaner or something. Hope it works!
Should work… and there’s no need to remove the AC line at all. I only did it cause it already has no pressure inside and I need to replace a gasket it’s leaking from.
So you just pop that lil tab that’s connected to the valve cover cause I didn’t see that part I’m new to the mechanic world and unfortunately this the job I chose to take on 😂 and trust me I’m having a terrible time with that last bolt but good thing I may be able to bypass taking the intake manifold off and take the valve cover off to replace the seal🦾
My valve cover has a gap in some places and im not sure why, the back seems to go flush with the head but the middle part doesn't and I don't wanna hog down on it
Try using something with a straight edge like a long ruler and check to see if the valve cover is flat from edge to edge. If not you’ll need to replace the valve cover. If it is flat do the same to where to cover meets the surface of the head, and if the head is not flush then you’ll need a new head. Either way if you don’t want to purchase any of the two then let me know and I can come up with a way you can make it work for now.
my 02 trailblazer has oil leaking into the cylinder 4 and 5 spark plug wells, im no expert but im wondering if this could be a possible fix, some people are saying my piston rings are bad but some say that isn’t the problem so i’m stuck.
It can be the rings yes. But, it can also be a head gasket leaking the oil into the pistons and the valve cover gasket is definitely leaking it into the spark plug well. All can be fixed. I know I love my truck so it’d be worth the time to fix it.
Depending on how loose the spark plug is on cylinder 4 the oil can easily just be dripping in from the well. Which can be best case cause all you’d have to do is what I do in this video.
That’s the Fuel Pressure Regulator Vacuum Tube… here’s a link to one that should work just fine. www.ebay.com/itm/OEM-Fuel-Pressure-Regulator-Vacuum-Tube-For-Chevrolet-GMC-Oldsmobile-17113556-NA-/373997945545?mkcid=16&mkevt=1&_trksid=p2349624.m2548.l6249&mkrid=711-127632-2357-0
I replaced it cause i saw oil around the valve cover bolts on the passenger side. Also, there was oil coming from between the valve cover and the head, which it'd get onto the exhaust and burn up. I also noticed some oil in where the spark lay inside the well. I wasn't getting any codes for it, but it is possible to get a misfire code if the oil coats the spark plug and not allow it to spark correctly.
Try making sure all the connections are fully seated including the spark plug wires. If you continue to have issues with the loss of power try your coils. The coils tend to be an issue I’ve noticed on this truck. If you still have issues after that. Contact me on my Facebook page (JTuned Garage) and we can get more in-depth on figuring out what needs to be done.
My Trail Blazer is 2003. Looks amazing but is over hot after 20 minutes driving. I need change the gasquet. The little Water go inside of engine. I’m in California. Temecula. Wher you At. Help me. I need my car
If your noticing coolant in the motor then you more then likely need to replace the head gasket. The overheating is common with these models. I had two that had it, what fixed it for me believe it or not was one was missing the plastic fan cover and when I added it… the over heating stopped. The other I replaced the fan clutch and added an aftermarket fan in front of the radiator (towards the front of car) blowing into the vehicle and the overheating stopped.
I'm watching & I replaced mine, 2003 oldsmobile bravada about 2 years ago & I didn't take off fuel lines. It was hectic with the back bottom bolts by the fire wall.. Took me about 12 hours, first time. Bout to redo it again in a few weeks. The memories are coming back as I'm watching 😂 the struggle is real
Right... videos I'm posting now, Mann. My truck kicked my azz. To include the one I'm editing tomorrow. Hopefully I can do my garage update video now that I'm done with the truck.
Great video. Theoretically, the less removed the better. Now I'm headed to my driveway to give it a try.
Wish me luck
I'm sure you'll be fine. Honestly, I had more trouble with the gaskets for the sparkplugs on the valve cover, so be careful cause the valve cover is plastic and can break. I suggest if they were fine and look good, don't risk cracking the cover and leave them on.
Great video very helpful getting ready to do my 03 envoy tonight/finish tomorrow
Thank you , this video helped a lot.
Very nice video. Just removed my alt. Intake, and my back is killing me. Not an easy job. Have to replace valve cover also. Not looking forward to the rest of the job. Thanks again .
Dang Bruh, you got that Yayo sniff!
lol... nah it was cold that day, so my nose was runny.
Really nice video man! About to do this to mine after I found oil in the #1 spark well causing 1 to miss. Got a new coil for 1 and new plugs for all 6 since I’ll be there anyway… I noticed you removed the ac tube. My ac is currently working. Is that ac line pressurized with refrigerant? Would I have to recharge the system afterwards? Also replacing vvt solenoid and gonna try to clean out the pcv tube with some carb cleaner or something. Hope it works!
Should work… and there’s no need to remove the AC line at all. I only did it cause it already has no pressure inside and I need to replace a gasket it’s leaking from.
So you just pop that lil tab that’s connected to the valve cover cause I didn’t see that part I’m new to the mechanic world and unfortunately this the job I chose to take on 😂 and trust me I’m having a terrible time with that last bolt but good thing I may be able to bypass taking the intake manifold off and take the valve cover off to replace the seal🦾
My valve cover has a gap in some places and im not sure why, the back seems to go flush with the head but the middle part doesn't and I don't wanna hog down on it
Try using something with a straight edge like a long ruler and check to see if the valve cover is flat from edge to edge. If not you’ll need to replace the valve cover. If it is flat do the same to where to cover meets the surface of the head, and if the head is not flush then you’ll need a new head. Either way if you don’t want to purchase any of the two then let me know and I can come up with a way you can make it work for now.
There's 2 fuel lines did you remove the other one
I didn’t remove any fuel lines… just moved them out my way. At the 05:10 mark I show it.
my 02 trailblazer has oil leaking into the cylinder 4 and 5 spark plug wells, im no expert but im wondering if this could be a possible fix, some people are saying my piston rings are bad but some say that isn’t the problem so i’m stuck.
It can be the rings yes. But, it can also be a head gasket leaking the oil into the pistons and the valve cover gasket is definitely leaking it into the spark plug well. All can be fixed. I know I love my truck so it’d be worth the time to fix it.
Depending on how loose the spark plug is on cylinder 4 the oil can easily just be dripping in from the well. Which can be best case cause all you’d have to do is what I do in this video.
Its called valve cover and tube seals
No way is it possible for oil to contaminate the spark plug tubes and it be from a piston ring. That's absurd.
I bet it the cam cover gasket/ spark plug gaskets my envoy is getting oil in 1-5 your can tell if it coming from cam cover cer easily
Did you had to disconnect the ac line n recharge later ?
There’s no need to disconnect it you can move it out the way. I disconnected mine cause I need to replace a gasket seal on it so it was already empty.
13:52 what is this small pipe called? it's missing from my TB.
That’s the Fuel Pressure Regulator Vacuum Tube… here’s a link to one that should work just fine.
www.ebay.com/itm/OEM-Fuel-Pressure-Regulator-Vacuum-Tube-For-Chevrolet-GMC-Oldsmobile-17113556-NA-/373997945545?mkcid=16&mkevt=1&_trksid=p2349624.m2548.l6249&mkrid=711-127632-2357-0
@@JTuned_Garage thanks a ton.
No problem bud… I’ll be here if there’s any other questions. 👍🏽
@@JTuned_Garage It seems this link is no longer valid. It redirects you to eBay but oops we looked everywhere no joy.
How much total time did take you to complete the job?
I wanna say it takes about 2 hrs. For me it took a bit more time recording and taking some time to talk.
Why did you replace the valve cover gasket? What symptoms was it having?
I replaced it cause i saw oil around the valve cover bolts on the passenger side. Also, there was oil coming from between the valve cover and the head, which it'd get onto the exhaust and burn up. I also noticed some oil in where the spark lay inside the well. I wasn't getting any codes for it, but it is possible to get a misfire code if the oil coats the spark plug and not allow it to spark correctly.
Great video! Is the sequence the same for an 06 Trailblazer LS? If so, what are they? I can’t find it any where!! TIA
Yeah it's the same... what sequence are you asking for? The firing order?
The sequence to tighten the bolts down of the valve cover.
Ok so message my Facebook page ( JTuned Garage ) I'll draw it up and send it to you.
Done.
Hey so did u have to remove the alternator
You do have to because there is a bolt behind it you need to get to in order to unscrew it.
Does the oil have to be drained before doing this job??
No. Just let it sit awhile so the oil can settle out of the head.
@@JTuned_Garage ok, thank you!! 🙏🏽
you forgot to connect the cam pickup sensor...lol!!! good job tho.... this task is not for the faint of heart.
I did after I cut off the video. Hahaha 🤣 maybe I should have added a little clip at the end haha
I had a loss of power after I did all this. The spark plugs are replaced as well as the throttle body and I still have a loss of power
Try making sure all the connections are fully seated including the spark plug wires. If you continue to have issues with the loss of power try your coils. The coils tend to be an issue I’ve noticed on this truck. If you still have issues after that. Contact me on my Facebook page (JTuned Garage) and we can get more in-depth on figuring out what needs to be done.
Sry to hear your having issues but I’ll try as best I can not being in person to help you out.
My Trail Blazer is 2003. Looks amazing but is over hot after 20 minutes driving. I need change the gasquet. The little Water go inside of engine. I’m in California. Temecula. Wher you At. Help me. I need my car
If your noticing coolant in the motor then you more then likely need to replace the head gasket. The overheating is common with these models. I had two that had it, what fixed it for me believe it or not was one was missing the plastic fan cover and when I added it… the over heating stopped. The other I replaced the fan clutch and added an aftermarket fan in front of the radiator (towards the front of car) blowing into the vehicle and the overheating stopped.
You don’t have to remove fuel lines bro I didn’t on mine and still change valve gasket.
I didn't remove them either....
@@JTuned_Garage oh I see nice
Your music's very annoying