Because Triton is so concentrated I had to add the wave pump. It was immediately precipitating and falling to the bottom of the sump. Easily fixed with the tiny pump and you're right, it does keep the sump a little cleaner 😁
I'm also raising coral in Korea. Almost the same equipment in foreign countries. You're using it. The video list coral is so pretty, periodically. I'll keep an eye on you. Thank you for the good video. I wish you happiness.
Have you cleaned the sump before taking this video? Looks extremely clean. I have the same size Clarisea, but some particles (like a dust) still pass even through fleece, so the bottom is slightly covered by this dust.
Is this Clarisea SK-3000 with 10 cm rolls? I have an option to buy Bubble Magus ARF-S (10 cm/25 m) or ARF-M (15 cm/25 m) at the same price, but I'm not sure if extra 50% of roll surface is worth loosing quite a lot of extra space in the sump. What would you choose? Tank size is same as yours, only different sump.
Hello! Thanks for sharing your Sump. I have one qustion, don´t you strugle with air bubbles in your GHL Dosing Pumps tubes , I am strugle with bubbles :(
Hi, When you fitted the Clarisea what sump modification was needed? I gather removing the two filter socks, but did you have to remove any internal walls or add internal walls? Thanks
Was great to have a detailed run through of your sump mate, a good tip on the "soda lime" too, some of the products that add reefing tax are ridiculous, the clarisea is an awesome bit of kit, cant wait to upgrade so I can get one!
Nice video thanks- could you do a video explaining how do you use your GHL System and if you would buy it again or would you go another route, like the APX, the Hydros or another, is this equipment going to be here for a while who knows. It has always call my attention- with APX is always been here and always backwards compatible, and they keep improving it. I am inclining for the Hydros so far I really like it and I think I am going that route, it is easy reliable and seems promising I just hope it will be here for a while. Not many people explain about this Device ReefBum has it but does not explain much either.. any how only if you can if not I understand have a good day and thanks for the videos... nice tank..
The most difficult part of reef tank is maintaining the live corals. My tank with dead corals combined with colorful fake corals look like this. lol! Fake corals are made of natural coral crumbles and they look and feel real on hand and they are perfect when put underwater.
I have the same tank as yours and also have the same clarisea installed. I like the skimmate collected by your nyos skimmer. Im using bubble magus curve 5 skimmer but havent had luck to have that kind of thick skimmate i see in urs. My nitrates are ok but cant seem to bring my phosphate down. Not sure if it would help if I upgrade the skimmer. What are your thoughts? And do u mind sharing your nutrient and parameters?
My phosphate is controlled by using lanthanum chloride. The skimmer plays a key part but I do have to dose lanthanum to the tank to remove the excess phosphates. Without lanthanum dosing my po4 reading is 0.1 and I bring it down to 0.04
Thats what I started to use too. I am trying out dosing Brightwell Phosphate-E. PO4 is now 0.17, down from 0.5 3 weeks ago. But im dosing up to 15ml/ day now so im thinking it could get expensive. Anyway thanks for sharing.
I’m subbed.. one suggestion or constructive criticism really is you should start your playlist with older vids first then newer vids last.. that way ppl can watch your tank progress over time and not have to keep searching though vids to find next vid. I plan to get into reffing with the 250 soon
Hello- Great video! extremely informational..just a quick question, I have a 250 as well and wanted to get this clarisea and wanted to ask if you had to modify your sump in order for it to fit?
Honestly there's not much thought behind it 😂 I just dont like any metal in the water 24/7. I know there's zero risk of it rusting but it's now just a habit to take it out and place it where it is
Hiya, great video to show the overview of your sump. Could I kindly ask you something, I am in the process of buying a Red Sea Reefer 170, would you recommend me to do the same that you did regarding taking the filter socks out and putting the Clarisea? or an overkill for the Reefer 170? thanks a lot mate, have a great day,
It's just the same as having a skimmer and a filter socks. The roller removes the undissolved organic waste and the skimmer removes the dissolved organics. Having a roller means I don't have to change out socks every 3 or 4 days
@@NanoTankReefer Yes please that would be super helpful. I love your setup trying to copy it. I unfortunately have the same issue with my red sea skimmer.
Yeah that red sea skimmer is one of my worst reefing purchases. Thankfully my LFS were cool about everything and let me just return it and pay the extra for the nyos
Great video. I love the idea of having a wavemaker under the dosing lines, I need to copy this on my next build 👍. No UV steriliser? Why not? I've been tempted by one that's all. Thank you.
I've considered UV before but I don't have the space for it. I thought about having it mounted outside the cabinet as I'm all out of room inside. They are pretty ugly pieces of equipment so I decided against it 😂
I like the wave pump below the dosing lines. No precipitate and keeps your sump more clean.👍
Because Triton is so concentrated I had to add the wave pump. It was immediately precipitating and falling to the bottom of the sump. Easily fixed with the tiny pump and you're right, it does keep the sump a little cleaner 😁
If I had a sump this is exactly how I’d spec it! So good!
Thanks Mikey
Nice set up with good kit. 👍 Keep the content coming.
Cheers dude, I sure will 😁
Got myself a red sea 170, that DIY cabinet idea is smart. May look into some shelving on top of my sump. Too much height space
I'm also raising coral in Korea.
Almost the same equipment in foreign countries.
You're using it.
The video list coral is so pretty, periodically.
I'll keep an eye on you.
Thank you for the good video. I wish you happiness.
Thank you 😊
Have you cleaned the sump before taking this video? Looks extremely clean. I have the same size Clarisea, but some particles (like a dust) still pass even through fleece, so the bottom is slightly covered by this dust.
Defo need to get a co2 scrubber. Never really thought about looking for lime soda other that aquatic shops. Great vid mate
Cheers buddy, yeah I refuse the pay the crazy prices the LFS try and charge for co2 media
Is this Clarisea SK-3000 with 10 cm rolls? I have an option to buy Bubble Magus ARF-S (10 cm/25 m) or ARF-M (15 cm/25 m) at the same price, but I'm not sure if extra 50% of roll surface is worth loosing quite a lot of extra space in the sump. What would you choose?
Tank size is same as yours, only different sump.
I think the Clarisea roll is 95mm wide buddy
Nice clean sump! I love looking at “under the hood” tank vid to get some inspiration
You and me both dude!
Hello! Thanks for sharing your Sump. I have one qustion, don´t you strugle with air bubbles in your GHL Dosing Pumps tubes , I am strugle with bubbles :(
Damn that roller is cool!
Pretty neat isn't it! It's alot less maintenance than filter socks believe me!
Hi,
When you fitted the Clarisea what sump modification was needed? I gather removing the two filter socks, but did you have to remove any internal walls or add internal walls?
Thanks
Really nice
Setup!!!
Cheers dude
Thank u for vids mate good work 🙌🏻
Cheers matey
Tanks looking mega mate loving the channel
Cheers Savage! You not tempted to get back on the TH-cam bandwagon?
@@NanoTankReefer I don’t have enough time for the basics atm 🙈
Was great to have a detailed run through of your sump mate, a good tip on the "soda lime" too, some of the products that add reefing tax are ridiculous, the clarisea is an awesome bit of kit, cant wait to upgrade so I can get one!
Cheers Ross! I'll bet you can't wait to get a bigger system. Any plans on upgrading?
@@NanoTankReefer yeah I definitely want to upgrade to a bigger tank next year, still not decided on what one yet tho mate
Red sea are ok but if I were to go for another off the shelf tank it would probably be a Waterbox
Nice video thanks- could you do a video explaining how do you use your GHL System and if you would buy it again or would you go another route, like the APX, the Hydros or another, is this equipment going to be here for a while who knows.
It has always call my attention- with APX is always been here and always backwards compatible, and they keep improving it.
I am inclining for the Hydros so far I really like it and I think I am going that route, it is easy reliable and seems promising I just hope it will be here for a while.
Not many people explain about this Device ReefBum has it but does not explain much either.. any how only if you can if not I understand have a good day and thanks for the videos... nice tank..
The most difficult part of reef tank is maintaining the live corals.
My tank with dead corals combined with colorful fake corals look like this. lol!
Fake corals are made of natural coral crumbles and they look and feel real on hand and they are perfect when put underwater.
No update? Your channel was top notch. Please come back :)
I have the same tank as yours and also have the same clarisea installed. I like the skimmate collected by your nyos skimmer. Im using bubble magus curve 5 skimmer but havent had luck to have that kind of thick skimmate i see in urs. My nitrates are ok but cant seem to bring my phosphate down. Not sure if it would help if I upgrade the skimmer. What are your thoughts? And do u mind sharing your nutrient and parameters?
My phosphate is controlled by using lanthanum chloride. The skimmer plays a key part but I do have to dose lanthanum to the tank to remove the excess phosphates. Without lanthanum dosing my po4 reading is 0.1 and I bring it down to 0.04
Thats what I started to use too. I am trying out dosing Brightwell Phosphate-E. PO4 is now 0.17, down from 0.5 3 weeks ago. But im dosing up to 15ml/ day now so im thinking it could get expensive. Anyway thanks for sharing.
I’m subbed.. one suggestion or constructive criticism really is you should start your playlist with older vids first then newer vids last.. that way ppl can watch your tank progress over time and not have to keep searching though vids to find next vid. I plan to get into reffing with the 250 soon
Good shout dude, I have playlists but I think they are backwards (newest first 🤦♂️) I'll get that sorted 🙂
I appreciate the sub dude 😎
Hello- Great video! extremely informational..just a quick question, I have a 250 as well and wanted to get this clarisea and wanted to ask if you had to modify your sump in order for it to fit?
What's your thinking behind not leaving the metal bit of the flipper in the water?
Honestly there's not much thought behind it 😂 I just dont like any metal in the water 24/7. I know there's zero risk of it rusting but it's now just a habit to take it out and place it where it is
@@NanoTankReefer saves cleaning the coraline off the wet side!!! I might try it! 👍
Nice walk through your sump video Tris. Does the dirty roller matt smell at all??
Surprisingly not... Or maybe I'm just so used to the smell of fish 💩 I don't notice it 😂
Hiya, great video to show the overview of your sump. Could I kindly ask you something, I am in the process of buying a Red Sea Reefer 170, would you recommend me to do the same that you did regarding taking the filter socks out and putting the Clarisea? or an overkill for the Reefer 170? thanks a lot mate, have a great day,
Attach your intake on co2 scrubber to the top of skimmer and it will be a recirculating co2 scrubber, really saves a ton on co2 media.
I have the same skimmer they are fantastic.
It's a great piece of kit!
Animal crossing and saltwater aquarium hobby oh yeahhh
😅
Why do you need a skimmer and a roller? Don't they do the same thing?
It's just the same as having a skimmer and a filter socks. The roller removes the undissolved organic waste and the skimmer removes the dissolved organics. Having a roller means I don't have to change out socks every 3 or 4 days
looking great bro
Thanks buddy 😎
what size is the tubing used to connect the CO2 scrubber to the skimmer?
I'm sure it's 5mm airline tubing buddy
Very nice tank. Goal 🙏
Thank you 🙂
Awesome set up. Can you do a video on dosing Latham chloride? Thanks
Would love a guide on how you installed your clarisea. Looking to do the same thing
Unfortunately I didn't record any footage of the Clarissa install. If you want I can give you the link to the reef to reef thread I used
@@NanoTankReefer Yes please that would be super helpful. I love your setup trying to copy it. I unfortunately have the same issue with my red sea skimmer.
www.reef2reef.com/threads/jasons-reefer-250-fish-added-sump-mod-clarisea-custom-plumbing-aquascape-w-e-marco-ikea-cabinet-mod-pic-heavy.680042/#post-6937909
Post 6 is the Clarisea install
Yeah that red sea skimmer is one of my worst reefing purchases. Thankfully my LFS were cool about everything and let me just return it and pay the extra for the nyos
Great video. I love the idea of having a wavemaker under the dosing lines, I need to copy this on my next build 👍. No UV steriliser? Why not? I've been tempted by one that's all. Thank you.
I've considered UV before but I don't have the space for it. I thought about having it mounted outside the cabinet as I'm all out of room inside. They are pretty ugly pieces of equipment so I decided against it 😂
Wow!
Cheers dude
Who put a thumbs down pricks lool looks amazing love it
😂😂 jealousy gets the better of some people mate
Filling that hidden RO water container must be a pain, especially trying not to spill water
I just siphon a 25L barrel of RO in once weekly bud. Piece of cake and zero spills 🙂
Pure 🔥
Cheers buddy
how are you controlling your phos thanks
I'm currently using lanthanum chloride for phosphate control
what happended to your reactor?
I removed it when I started dosing lanthanum chloride buddy
Es realmente hermoso
It friking nice and well done but I actually wont call it simple filtration.
So happy never got rs 600 looks crap and in red yuk lol
I'm with you on that, I'm not 1 for in your face crazy coloured equipment. White black and grey are 👌
@@NanoTankReefer I went for nyos 160 with ur help 🙌🏻
You can't go wrong with a nyos skimmer dude 💪
Definitely not a simple system. Very nice tho!
I’m sorry but this is not a basic filter setup
Mechanical filter, skimmer and some media. I would say it's pretty basic. No refugium or algae reactor
That is not simple. It costs many hundreds of dollars.
Simple? lol. please. that's like intermediate setup.
😅😅
$$$$$$$$$$$$$