How do we get hold of the Author / Handywoman to thank her? This video is much more thorough than big name brands - all the way to chiselling for the strike plate. This video has literally helped me as a reference time & again for YEARS!! :) THANKS!!
Thanks, Leah! As always, you offered a trick that few mention - install the strike plate and score the perimeter with a blade, rather than just mark with a pencil. Newbies with a chisel thank you!
We ended up exchanging this model for the slimmer version th-cam.com/users/postUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU because it was too wide for the only door trim area that made sense to mount it on. However, we should have just noted the dimensions prior to purchasing. Otherwise, we love the doorbell. It works perfectly, and the video is very clear, even at night.
You are you good at teaching…. You didn’t skip any details and you named every step you did. This gave me a lot of confidence so when I go to Homedepot I know the name of the items I need to buy!❤
Ms. Leah, you are wonderful!! My wife and I are newlyweds and we want to secure our home better. I have bought new deadbolt locks for all of our doors. I am, pretty much, a do-it-yourself kind of a guy and your videos help me tremendously to do that!! 😊. Thank you for your guidance and informational videos!! God bless you!!! 😁
I absolutely love you! With your guidance, I can do ANYTHING! I humbly appreciate you sharing your knowledge! So precise and easy to follow! Now I need to know to to replace my bathroom sink and that level thing for my shower!
great video!! the only thing wrong here is using a drill to tighten the deadbolt screws. Always use a screw driver and only tighten till snug, never over tighten them! If the screws are too tight, your thumb turn will be tight and will be stiff when trying to lock or unlock the deadbolt. This is because if the screws are too tight, it binds the lock causing it to seize up- I am a locksmith
Leah, as always, you explained it perfectly. I had no idea about how to do this before today. Now, I am reasonably certain I will be able to do it. Thank you!
Great tutorial - only thing missing is at 4:12 there’s no mention as to what bit is used. It appears as if you go in an inch. But how wide of a bit makes the hole?
Thank you Leah! I installed 2 deadbolts today and had a heck of a time getting the hole for the latch to line up. I made quite a mess out of one of the door jams. I wish I had watched your video first. Next time I will follow your trick for marking the spot.
Another excellent video. I'm going to do two that are "keyed" on both sides of the cylinder because there is glass in the door that a thief could break, turn the thumb knob to gain easy entry. As for the striker plate cover I always use the longest screws I have to anchor it several inches into and past the trim for more security. Just watch pout for any electrical that might be in that area. Thanks!!!!!!!
That was so great to watch! You have a great teaching style, makes watching you fun and not intimidating. You’re awesome! I have never been a handy person but after watching your video I feel much more confident! Keep up the great work :)
Learned a bunch and feel better about this DIY. I am going to wait till I have a"jig", which I'm betting is well worth paying for! Otherwise making everything line up just perfectly would be a real challenge for me, I know,
Thank you Leah. You Rock! You explained it so simply and easily, I'm actually looking forward to doing it for myself. I'll be looking for your other videos for my other DIY projects.
Very well described, and very easy to follow! One thing I would have added, however, is that there are 2 types of deadbolt, and this one was a single cylinder. Of course, one that can be locked from either side of the door with a key would be a 2 cylinder or double cylinder deadbolt.
Thank you. Great help once again. UPDATE: thanks to your great instructions i was able to replace my failed deadbolt. There was a bit of a problem though. The set back was 5 whole inches instead of the standard 2 3/8 or 2 3/4 and the new deadbolt component was too short. Fortunately, it wasn't the old deadbolt component that had failed (and by failed i mean that the key would just turn and turn in circles without stopping) and i was able to reuse it with the new outer and inner components. You gave me the confidence to make the attempt, and to punt when it wasn't going to plan, so thank you.
This is a fanstastic video, thank you so much. I'd just like to add, and this is in no way a criticism, that it's a good idea to wear some eye protection when doing stuff like this.
I had a hard time aligning the long screws to put the back part of the deadbolt on. I decided to tape the front part (where the key goes) to keep it from moving and it helped A LOT. Initially I was having a hard time but then when I did that it took only a minute to tighten the long screws in place.
I LOVE your videos, Leah! You are such an EXPERT at everything, and you explain steps, instructions and purpose so well with every project. Thank you so much. Julia
Well I can’t even do any D.I.Y but I liked your video and your teaching and down to earth approach is so easy to follow and full of handy advice. THANKS
As always, thanks Lea. I always suggest using an auxially tool template like the one you used (Milwaukee makes one too which I like) to make precise holes in the door prior to installation.
Yes we can! Thanks, fellow handywoman. Now I need to go get one of those kits -- I never knew that existed! Oh darn, I have to go to the hardware store... :-)
great video! Very clearly explained and thorough, Leah. It's probably important to point out, though, that putting a deadbolt next to a window isn't that secure, since an intruder can smash the glass and open the lock. I guess any door with a window like that is not secure.
Great tutorial - only objection I have has to do with the placement of the lock on this particular door. Anyone trying to get in just has to break the glass, reach through, and unlock the deadbolt. Bingo - they’re in. The rest of the tutorial is terrific!
Thank you, Leah! You explained everything very well. I watched the video a couple of times, bought the Ryobi template you used, and did my best. Unfortunately, I did not drill the 2 1/8" hole level from front to back. As I started the hole, the large white 2 1/18" bit caught the black ring of the Ryobi template. I thought I had the drill straight and level, but when I had finished the other side I realized it sloped downwards from front to back. The front and back plates of the lockset don't line up correctly, so I'm filing the bottom of one side and the top of the other in an effort to compensate. If this doesn't work, I might need a larger deadbolt lock, or a new door. Either way, it's not the end of the world, but I'm bummed. Here's something that I would suggest. DO NOT use the Ryobi template in place. Rather, use it to mark the front, back, and side holes very well, then REMOVE it before drilling. Drilling with the template in place threw me off when the 2 1/8" bit caught the edge of the black tube of the template. Oh well, live and learn. The Ryobi bits are well worth the money, and the template is good for marking.
easier said than done. When I went to put my deadbolt back on after painting it was not lined up right and would not work. I finally figured it out. Also the knob had to be in the lock position in order to get to the screws.
She forget to tell people the bolt for the lock is a " drive in" bolt. Most deadbolts come with a standard 2 3/4 backset mortise bolt. Also if you "tighten the lock to tight your bolt may work hard. Actually she left out a lot. I was a locksmith and people like this help keep us in business.
jeff stewart the problem I'm having is the margin between the door and the jam with the striker plate on it won't close so I took off the striker plate but it didn't come with the adapter to put on the deadbolt what would you suggest
If I understand your problem the space between the door itself and the door jamb is very tight. There are several solutions but without actually seeing it, I can only guess-First look at the edge of the door iis the striker plate leaving marks? if so then try this- If it's too tight then the door itself is usually out of wack. Look at the edge of the door is it equal all the way up and down? Try tightening the hinges first ,over time they loosen and the door sags. If the gap is okay then try counter sinking the striker plate" just a hair at a time- Also you can put lipstick on the bolt itself , close the door, operate the bolt several times enough to hit the jamb, this should leave a mark if it's not lined up correctly- then move the striker plate accordingly. If the space between door and door jamb is too great then I would try and build up the striker plate. Simplest solution take your striker plate to a local locksmith get another and install both. However doing this you should also use longer screws. There are other ways to build up the striker plate, like adding a thin layer of cardboard or adding wood putty and redrilling the striker plate holes.
Great instructions, just prob put a deadlock that's key turn on both sides, on a door with a window, (assuming that meets fire regs)another trick is to stick something on the head of the bolt after you install the deadbolt and turn the key so it marks the door same principal.
Leah, you are a natural Teacher. This video is excellent.
How do we get hold of the Author / Handywoman to thank her? This video is much more thorough than big name brands - all the way to chiselling for the strike plate.
This video has literally helped me as a reference time & again for YEARS!! :) THANKS!!
@Crazy-Roland-vDrums she has her own youtube channel she says it in the beginning of the video.
It's a real pleasure to see a skilled person who is also a clear communicator. Thank you so much.
Thanks, Leah! As always, you offered a trick that few mention - install the strike plate and score the perimeter with a blade, rather than just mark with a pencil. Newbies with a chisel thank you!
Always enjoy watching her do diy stuff. Her positive energy is always nice to see and hear.
Thank you!! Out of all ppl a woman was able to simplify it,!!! Geez!! Learned in two minutes! Thank you🙏🏽👌🏾🔥☺️
We ended up exchanging this model for the slimmer version th-cam.com/users/postUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU because it was too wide for the only door trim area that made sense to mount it on. However, we should have just noted the dimensions prior to purchasing. Otherwise, we love the doorbell. It works perfectly, and the video is very clear, even at night.
good to see that Zillow recognizes your talent and got you in their channel!
all DIYers should follow her on her channel.
You are you good at teaching…. You didn’t skip any details and you named every step you did. This gave me a lot of confidence so when I go to Homedepot I know the name of the items I need to buy!❤
This was a very informative and uncomplicated tutorial. Leah is quite the instructor. Keep her on the case, i like her style !!
Great video! I will add, that it is a good idea to use longer screws for the jamb plate. Makes it much harder to kick the door in.
Ms. Leah, you are wonderful!! My wife and I are newlyweds and we want to secure our home better. I have bought new deadbolt locks for all of our doors. I am, pretty much, a do-it-yourself kind of a guy and your videos help me tremendously to do that!! 😊. Thank you for your guidance and informational videos!! God bless you!!! 😁
I absolutely love you! With your guidance, I can do ANYTHING! I humbly appreciate you sharing your knowledge! So precise and easy to follow! Now I need to know to to replace my bathroom sink and that level thing for my shower!
great video!! the only thing wrong here is using a drill to tighten the deadbolt screws. Always use a screw driver and only tighten till snug, never over tighten them! If the screws are too tight, your thumb turn will be tight and will be stiff when trying to lock or unlock the deadbolt. This is because if the screws are too tight, it binds the lock causing it to seize up- I am a locksmith
Love Leah. I forward her videos to my husband all of the time. And, he always thanks me.
Leah, as always, you explained it perfectly. I had no idea about how to do this before today. Now, I am reasonably certain I will be able to do it. Thank you!
Very helpful! Thanks! And THANK you for saying "lies flush" instead of the incorrect "lays." That matters to a few of us still.
Great tutorial - only thing missing is at 4:12 there’s no mention as to what bit is used. It appears as if you go in an inch. But how wide of a bit makes the hole?
Thank you Leah! I installed 2 deadbolts today and had a heck of a time getting the hole for the latch to line up. I made quite a mess out of one of the door jams. I wish I had watched your video first. Next time I will follow your trick for marking the spot.
You rock! It's been decades since I've done this . Your instructions are easily followed.
Leah is the best teacher!!
Another excellent video. I'm going to do two that are "keyed" on both sides of the cylinder because there is glass in the door that a thief could break, turn the thumb knob to gain easy entry. As for the striker plate cover I always use the longest screws I have to anchor it several inches into and past the trim for more security. Just watch pout for any electrical that might be in that area. Thanks!!!!!!!
That was so great to watch! You have a great teaching style, makes watching you fun and not intimidating. You’re awesome! I have never been a handy person but after watching your video I feel much more confident! Keep up the great work :)
Learned a bunch and feel better about this DIY. I am going to wait till I have a"jig", which I'm betting is well worth paying for! Otherwise making everything line up just perfectly would be a real challenge for me, I know,
Thank you Leah. You Rock! You explained it so simply and easily, I'm actually looking forward to doing it for myself. I'll be looking for your other videos for my other DIY projects.
Your video gives me the confidence to do it on my own. Thank
welc
THE ABSOLUTE BEST INSTRUCTOR ,,,SHE IS "THE" BEST
I adore you the way you do thing and show your work and videos very useful a massive hug from Toronto Canada
Very well described, and very easy to follow! One thing I would have added, however, is that there are 2 types of deadbolt, and this one was a single cylinder. Of course, one that can be locked from either side of the door with a key would be a 2 cylinder or double cylinder deadbolt.
I would use the double cylinder simply because the glass in the door can be easily broken out
Thank you. Great help once again.
UPDATE: thanks to your great instructions i was able to replace my failed deadbolt. There was a bit of a problem though. The set back was 5 whole inches instead of the standard 2 3/8 or 2 3/4 and the new deadbolt component was too short. Fortunately, it wasn't the old deadbolt component that had failed (and by failed i mean that the key would just turn and turn in circles without stopping) and i was able to reuse it with the new outer and inner components. You gave me the confidence to make the attempt, and to punt when it wasn't going to plan, so thank you.
Leah, you are my go-to Guru for all things 'fix it'.
You made it look so easy!! Hope I can do it!
Well done, Leah. You make everything look easy.
Great explanation! I'm not the one doing it but it gives me a better idea when coordinating with the guy doing it. Thanks!
"You can use a lipstick". Genius!!! Leah always has the best tips and tricks for making DIY easy.
very detail oriented video and helpful for diy'ers and beginners. Thank you!
Thanks again Leah can always depend on you for the perfect way of doing a job❤❤❤
Thank You you made it short and simple and very easily understood
This is a fanstastic video, thank you so much. I'd just like to add, and this is in no way a criticism, that it's a good idea to wear some eye protection when doing stuff like this.
I had a hard time aligning the long screws to put the back part of the deadbolt on. I decided to tape the front part (where the key goes) to keep it from moving and it helped A LOT. Initially I was having a hard time but then when I did that it took only a minute to tighten the long screws in place.
Thank you for posting that. I thought I was the only one. Could not get screws aligned.
I LOVE your videos, Leah! You are such an EXPERT at everything, and you explain steps, instructions and purpose so well with every project. Thank you so much. Julia
THANK YOU. and I like the hole box kit I gotta get one of those No MORE GUESSING GAMES ABOUT LINING UP the cuts Thank you again ❤
Great tutorial, super clear instructions, no nonsense. Thanks Leah!!
I love watching Leah from See Jane Drill. I’ve been a subscriber of hers for years. Keep up the great work Leah!
Excellent job! I learned a few new things. One suggestion I would make is to use long screws for better security.
I agree
Yes the best screws that you could use are deck screws that are 3" - 4" in length.
@@cloudstrifeification
Stainless steel would be a much better choice
Well I can’t even do any D.I.Y but I liked your video and your teaching and down to earth approach is so easy to follow and full of handy advice. THANKS
Thank you, Leah. Your videos are amazing and easy for the common weekend warrior to understand.
As always, thanks Lea. I always suggest using an auxially tool template like the one you used (Milwaukee makes one too which I like) to make precise holes in the door prior to installation.
Yes we can! Thanks, fellow handywoman. Now I need to go get one of those kits -- I never knew that existed! Oh darn, I have to go to the hardware store... :-)
You did an amazing job explaining that installation. Thank you again!!!
Striker plate- good to know the name ! Thanks ❤
Always enjoy watching your videos! You make it look so easy. Thank you so much!
This is awesome, I got the same door jig. Going to try tomorrow.
You rock, Leah.
Leah you are wonderful, you always make easy that "difficult job"..thank you so much
Great video..thank you. Where can I get that install kit?
Great video. The slow, step by step explanation is very helpful and much better than most TH-cam tutorials. THANK YOU! I just subscribed.
That's what we like to hear!
@@Zillow Really???
She skipped few steps & explanation.
great video! Very clearly explained and thorough, Leah. It's probably important to point out, though, that putting a deadbolt next to a window isn't that secure, since an intruder can smash the glass and open the lock. I guess any door with a window like that is not secure.
Thank you Ms. Leah!!!
You make it look so easy! 👍🏻
OMG!! I did this today...thank you!!
Leah: You are the bomb!!! You made this project simple and understandable. Thanks.
Thank you, Leah. ✌🏼💜
Thank you very much for the great video. I plan to install one this weekend.
You are a blessing! Thank you.
Great tutorial - only objection I have has to do with the placement of the lock on this particular door. Anyone trying to get in just has to break the glass, reach through, and unlock the deadbolt. Bingo - they’re in. The rest of the tutorial is terrific!
Great instructional content here! Thank you very much.
GREAT VIDEO. VERY COOL. THANK YOU!
Awesome video! Thanks Leah!
good job Leah
Thanks again Jane
Thank you, Leah! You explained everything very well. I watched the video a couple of times, bought the Ryobi template you used, and did my best. Unfortunately, I did not drill the 2 1/8" hole level from front to back. As I started the hole, the large white 2 1/18" bit caught the black ring of the Ryobi template. I thought I had the drill straight and level, but when I had finished the other side I realized it sloped downwards from front to back. The front and back plates of the lockset don't line up correctly, so I'm filing the bottom of one side and the top of the other in an effort to compensate. If this doesn't work, I might need a larger deadbolt lock, or a new door. Either way, it's not the end of the world, but I'm bummed. Here's something that I would suggest. DO NOT use the Ryobi template in place. Rather, use it to mark the front, back, and side holes very well, then REMOVE it before drilling. Drilling with the template in place threw me off when the 2 1/8" bit caught the edge of the black tube of the template. Oh well, live and learn. The Ryobi bits are well worth the money, and the template is good for marking.
Exactly what I needed! Thank you!
easier said than done. When I went to put my deadbolt back on after painting it was not lined up right and would not work. I finally figured it out. Also the knob had to be in the lock position in order to get to the screws.
Thanks. Your video saved me $$ and frustration.
Thank you!!!!!!!!!!!
Great job!
I need a smart all-around talented friend like you in my life. You are very talented and a great teacher. Could I adopt you for my big sister? :-)
Great video and explanation!
I always find the striker plate the hardest bit.
excellent job! thanks
Cool thanks. Hv a nice day.
Always use 3 inch screws for strikeplate
Fantastic guide! Thank you.
Leah is awesome!
She forget to tell people the bolt for the lock is a " drive in" bolt. Most deadbolts come with a standard 2 3/4 backset mortise bolt. Also if you "tighten the lock to tight your bolt may work hard. Actually she left out a lot. I was a locksmith and people like this help keep us in business.
jeff stewart the problem I'm having is the margin between the door and the jam with the striker plate on it won't close so I took off the striker plate but it didn't come with the adapter to put on the deadbolt what would you suggest
If I understand your problem the space between the door itself and the door jamb is very tight. There are several solutions but without actually seeing it, I can only guess-First look at the edge of the door iis the striker plate leaving marks? if so then try this- If it's too tight then the door itself is usually out of wack. Look at the edge of the door is it equal all the way up and down? Try tightening the hinges first ,over time they loosen and the door sags. If the gap is okay then try counter sinking the striker plate" just a hair at a time- Also you can put lipstick on the bolt itself , close the door, operate the bolt several times enough to hit the jamb, this should leave a mark if it's not lined up correctly- then move the striker plate accordingly.
If the space between door and door jamb is too great then I would try and build up the striker plate. Simplest solution take your striker plate to a local locksmith get another and install both. However doing this you should also use longer screws. There are other ways to build up the striker plate, like adding a thin layer of cardboard or adding wood putty and redrilling the striker plate holes.
What help would it be for this process to know that the bolt is considered a "drive in" bolt?
Love your demo's😄😄
You knocked this one out of the park Leah!
Or "locked" it out of the park. anyone?
Thanks a lot mam, jane.. I try it to may house from 🇵🇭.. GOD bless..
Nice work!
Totally awesome video. Thanks!
Great value!
Nice! Thank you.
What a great video! Thank you!
Great instructions, just prob put a deadlock that's key turn on both sides, on a door with a window, (assuming that meets fire regs)another trick is to stick something on the head of the bolt after you install the deadbolt and turn the key so it marks the door same principal.
4:50 no I found 300 directions the bolts can go. The lock knob won't seat even if I get the threads started. I have been at this step for 3 hours
A good wind can kick that door in without using 3in screws for the strike plate.
nice video. very well done.
I just saved 💯 'S of dollars... THANK YOU SO MUCH
Thank you for the video. You're done a great job.