How To Make Pourable Shampoo Bars

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 มิ.ย. 2024
  • Pourable shampoo bars are hard and long-lasting, If you are a fan of solid shampoo bars, this formula of pourable shampoo bars suits regular and dry hair.
    For the written formula with measurements and a calculator (and more information), check the post on the website:
    diycosmetica.com/pourable-sha...
    ⏰ TIMESTAMPS
    0:00 Intro
    00:36 Phase A
    01:50 Phase B
    02:44 Phase C
    05:58 Outro
    Check this post on shampoo bars for beginners:
    diycosmetica.com/shampoo-bar-...
    Marble Shikakai shampoo bars:
    diycosmetica.com/marble-shika...
    Silky solid conditioner bar:
    diycosmetica.com/solid-silky-...
    Ingredients for cosmetics:
    diycosmetica.com/ingredients-...
    Dish soap recipe:
    diycosmetica.com/solid-dish-s...
    Always check if you're not sensitive to the ingredients, and ask your doctor for any additional medical advice and information before using DIY cosmetics.
    ---------------------------------------------------------------------------------------------------------------------------
    DIY Cosmetica is a blog with recipes, tips, information, and many more about making cosmetics products at home by yourself.
    ---------------------------------------------------------------------------------------------------------------------------
    Follow us on Instagram: / diycosmetica
    #shampoo #shampoobars #solidshampoo #zerowaste #diyshampoo
    How to make Pourable Shampoo Bars

ความคิดเห็น • 37

  • @jamialaprince6556
    @jamialaprince6556 8 หลายเดือนก่อน +6

    This turned out great. I'd love to advise using primarily liquid surfactants, two would be sufficient and for more foam add a foam booster over a heavy amount of powdered surfactants. Additions of a small percentage of butters and a wax can add an impressive skin feel and hold the shape of your bars well. You'll find that the use of several large percentages of fatty acid thickeners/stabilizers makes the formula hard to pour into your molds. When using multiple thickeners in one formulation, a percentage of 0.5-1% of each is more than enough as they will all work together in your product alongside your emulsifier BTMS 25.
    You did an incredible job, please keep going!
    -Your fellow entrepreneur and formulator

    • @diycosmetica
      @diycosmetica  8 หลายเดือนก่อน +1

      Thank you so much 😊
      I agree with you it adds more foam with the liquid surfactants.

    • @jamialaprince6556
      @jamialaprince6556 8 หลายเดือนก่อน

      You're most welcome.

    • @marianadave5392
      @marianadave5392 3 วันที่ผ่านมา

      thank you for the video, it helped me a lot ❤

  • @ediths.q.3097
    @ediths.q.3097 23 ชั่วโมงที่ผ่านมา

    Lovely! Thank you!

    • @diycosmetica
      @diycosmetica  18 ชั่วโมงที่ผ่านมา +1

      Glad you like it!

  • @wendysuazo8412
    @wendysuazo8412 9 หลายเดือนก่อน

    Excelent video, thank you very much

    • @diycosmetica
      @diycosmetica  9 หลายเดือนก่อน

      Glad you liked it!

  • @27sparkle73
    @27sparkle73 10 หลายเดือนก่อน

    Thank you so much for sharing.

  • @Sheisandcan
    @Sheisandcan 14 วันที่ผ่านมา +1

    Thank you so much for your recipe. Do we increase the percentage of stearic acid when using liquid based surfactant like sodium methyl Coco taurate? Also which of the ingredients can we reduce from if we want to introduce a plant based powder?
    I don't have a mold and I want to put shikaikai, so this pour recipe looks more befitting.
    Thank you once again

    • @diycosmetica
      @diycosmetica  14 วันที่ผ่านมา +2

      You want to replace the decyl glucoside or replace the solid surfactants?
      If you replace the solid surfactants with a liquid one the shampoo bar won’t be solid.
      You can add 2-3 grams of shikakai powder and reduce this amount from the SCI.
      I would not add more stearic acid, stearic acid can cause the shampoo bar to have a “draggy” feel on the hair.
      I made another shampoo with shikakai powder if you want to check it out:
      diycosmetica.com/marble-shikakai-shampoo-bar
      This is also a solid shampoo bar.

    • @Sheisandcan
      @Sheisandcan 14 วันที่ผ่านมา

      Thank you 💖💖💖

  • @absolute.skincare53
    @absolute.skincare53 9 หลายเดือนก่อน

    Can we use di sodium cocoyl glutamate instead of sodium cocoyl glutamate? It's in liquid form.

    • @diycosmetica
      @diycosmetica  9 หลายเดือนก่อน +2

      To replace a solid surfactant you’ll need a solid surfactant.
      Please read about alternatives in the post:
      diycosmetica.com/pourable-shampoo-bars

  • @curly-q7764
    @curly-q7764 2 หลายเดือนก่อน

    Is there any way to add honey and lemon oil to these? Like lush's shampoo bar?

    • @diycosmetica
      @diycosmetica  2 หลายเดือนก่อน +1

      When you add honey you should make sure to use a preservative that can preform well with honey. Don’t use too much to avoid stickiness consistency (1-3% should be enough), and add the honey when you take off the mixture from the heat since heating can cause the honey to lose its properties.
      And you should adjust the formula, if you add 2% honey subtract these 2% from another ingredient (the carrier oil for example).

  • @efilits-1258
    @efilits-1258 8 หลายเดือนก่อน

    I made them and now I will wait 12 hours just the mixture was not as smooth as yours because it had some lumps is this normal?? Do you think the bathroom will be full of pieces?

    • @diycosmetica
      @diycosmetica  8 หลายเดือนก่อน +1

      Hi! Instead of waiting 12 hours you can put them in the fridge for 3 hours and they will solidify quickly.
      To get the mixture smooth you need to mix and stir while heating and let the mixture stay into the double boiler until the heat dissolved all the powders and solid ingredients. The main reason for that is the hardness of the bar you’ll get after the heating and cooling process, and also to make sure everything is combined.
      That been said you can still use them even if you get some lumps, but for next time make sure to stir while heating to dissolve everything.

    • @efilits-1258
      @efilits-1258 8 หลายเดือนก่อน

      Thank you :)

  • @S-tc6bd
    @S-tc6bd 3 หลายเดือนก่อน

    Can we just use replace sodium cocyl glutamate with more sci?

    • @diycosmetica
      @diycosmetica  3 หลายเดือนก่อน +2

      Since you can use up to 60% of SCI - you can use only this one surfactant.

    • @S-tc6bd
      @S-tc6bd 3 หลายเดือนก่อน

      @@diycosmetica many thanks

  • @toyosiogunsori4452
    @toyosiogunsori4452 หลายเดือนก่อน

    Can we use btms 50

  • @ronalroro9037
    @ronalroro9037 หลายเดือนก่อน

    Where are the exact amounts?

    • @diycosmetica
      @diycosmetica  หลายเดือนก่อน

      diycosmetica.com/pourable-shampoo-bars

  • @afiii5913
    @afiii5913 3 หลายเดือนก่อน

    Has so many lumps in it

    • @diycosmetica
      @diycosmetica  3 หลายเดือนก่อน +1

      If you melt it it will be smooth.

    • @afiii5913
      @afiii5913 3 หลายเดือนก่อน

      Thank u

  • @sephineminien3230
    @sephineminien3230 2 หลายเดือนก่อน

    This is what I would call a standard shampoo bar, for deep cleansing and greasy hair, as it has no beneficial ingredients for dry or curly hair.

    • @diycosmetica
      @diycosmetica  2 หลายเดือนก่อน +1

      I disagree. You have cationic surfactant, argan oil and 2 other emollients, as well as sodium lactate (humectant), not to mention the surfactants are mild and very suitable for dry and damaged hair.
      All the shampoo bars I see online for greasy hair contain 0 oils or cationic surfactants and usually made with SCS and SLS - harsher surfactants with stronger cleansing properties.

    • @diycosmetica
      @diycosmetica  2 หลายเดือนก่อน

      This is an example for a shampoo bar designed for greasy hair by Lush, you’re welcome to check the ingredient list and see the difference:
      www.lush.com/es/es/p/jumping-juniper-shampoo-bar-2021

    • @sephineminien3230
      @sephineminien3230 2 หลายเดือนก่อน

      @@diycosmetica Disagree all you want, I know curly, sundamaged hair and I know formulations, and this is not going to be a good match.

    • @diycosmetica
      @diycosmetica  2 หลายเดือนก่อน +2

      If you know formulations why don’t you make your own formulations for your type of hair ?!
      You obviously don’t need this channel.
      Best of luck!

    • @sephineminien3230
      @sephineminien3230 2 หลายเดือนก่อน

      @@diycosmetica I do make my own, they are approved and I am licenced to sell, which I do very successfully. but I am also of the opinion that you can always learn more and from others, which is why I am here.
      You don't need to be so offensive because I point out, that this formulation works best for normal to greasy hair. I am not a competitor, nor am I criticising your video.