ARCTIC CAT ATV ENGINE TEARDOWN
ฝัง
- เผยแพร่เมื่อ 18 ต.ค. 2024
- WE TEAR DOWN THE ENGINE FROM OUR 2008 ARCTIC CAT 650 H1!!
FOLLOW US ON INSTAGRAM @905.garage TO STAY UPTO DATE ON OUR PROJECTS AND GET A SNEAK PEAK ON OUR UPCOMING VIDEOS!!
DONT FORGET TO LIKE AND SUBSCRIBE
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
i love northern garage repair videos, watching the layers come off is funny as hell because im going through the same thing with the wood stove in my garage.
Down to the part of splitting the motor casing. Not sure we have everything disassembled anyway to help us?
Y'all do great work!
do you still have the pictures you took? got mine apart its been apart longer then i wanted i have some pictures but not enoiugh
905 ? Where you guys located? I got a articat 400 something wrong in the tranny
Howd you get the magneto off? In the video didnt look like you used a special puller? Im stuck here on my rebuild
Gotta have a special tool to take the megneto off
uhhh buddy.... a tad bit of side to side play is normal on a connecting rod...... zero up and down play is what you are looking for, there was nothing wrong with the big end rod bearing.
We know that. We checked the up down play off camera and it was out to lunch,
Super !
Great video series. I just bought an artic cat 700 efi Ian’s I can’t get anything from the engine. Need to look at the wires on it. Keep the videos coming.
What kind of issues are you having?? Maybe we can point you in the right directions
@@905garage5 the starter turns but nothing from the engine. Don’t know if the injector is getting a signal to deliver the fuel. I do see some wires where the layer is peeling. Want to take all the wires off and go thru it and would like to take the engine out and take it apart to see what needs replacing.
@@rickylandry5472 is there any noise coming from the fuel pump?Pull your fuel fill cap and listen closely while cycling the key to see if the fuel pump is priming , a simple process of elimination , also if there is any codes flashing on your display panel that would be a great start
@@905garage5 when I turn the key the fuel pump kicks on and primes the line. There are no errors that show up in the display. Looks like it will be a process to figure what is causing it
@@rickylandry5472 where is The starter location?
Yo bro! Where are you in Ontario? I’m in grimsby mountain. Doing the infamous bevel gear on my 700, your video helps tons! But could use some more help/advice where you went for rod bearing I’ll buy the beer
We're just in dunnville , we sent our crank out through Jamie at just revive it in Smithville / st Anne's area , he was a huge help to us
Hey mate, I have a 2015 arctic cat 700 cat my gear shifter sounds like it's selecting between p r n h L however it's stuck in park. It doesn't feel any different to when it was working. Any idea what it could be ?
I would start by disconnecting the gear shift linkage and checking the actual shifter itself to make sure it's moving free , once that's confirmed it narrows it down to being a selector issue or internal problem but likely the be just the electrical sensor which reads your gear select
Can you help me with engine reasembly on the gearbox?
I’m looking for a cylinder for a 650 or 700 prowler you know anyone or a complete motor? I have a 2007 prowler
Had the same issues with my 07 650 H1 seems that is common to Arctic Cats shity set up for sure.
Agreed ,once the issues we're adressed and this thing was rebuilt it ran great and had great oil pressure, sadly i think current arctic cat / textron atv quality goes down more every year
@@905garage5 love the bike just hate that is has a bad crank design
Wich artic cat?
What year and size is this ?
2008 . 650cc
Transmission Artic car 366