On 700 hdx prowler, drive belt broke and was wrapped around secondary clutch. Removed secondary clutch nut easily. Primary clutch nut will not come off. Tried 3 impact wrenches with some heat. Any ideas?
I have a 2008 650 h1. When I thread the cover bolt in to spread the secondary clutch. The bolt hits a ring washer in between the inner and the outer of the secondary clutch. It basically bends the large ring washer and still spreads the clutch. Is this normal? It doesn't seam right
badass, I am having trouble figuring out what the problem is on my 2009 TCat. I get alot of clutch chatter when I his the throttle. I followed your vidoes which were EXCELLENT. There was nothing wrong with the primary and secondary. I do have play in the secondary shaft to about 1/16" in and out, not up and down, There is nothing else visably wrong. If you have time, I can send you a quick video of my progress. ANY suggestions would be great,
These videos are great...very well done! I have a 2007 650H1. The Clutch and housings look the same...are they? Is the dis-assembly page still available? Do you have the torque specs for the nuts and housing bolts? I could not find it on the website.
wondering if anyone can help me out we took the belt off a 2003 artic cat atv the pully on the right faceing the atv is fully closed how do I get it back open to put on the belt?
Wow they told me at the dealership that it would take 1.5 hours of labour at $105 an hour plus tax plus the belt to replace. It seems like this can be done in under 10 minutes with the right tools.
Just what I needed to know, thank you from the UK...
Thanks - this was exactly what I was looking for. Nice job, quick and clear - well done bud for making it about the job! :0)
Thank you for this video. It was exactly what I needed
This is a very good tutorial. Thanks
hey Adam thanks alot the video really helped, appreciate it
The secondary clutch what is the shaft and bearing called with the gear on it
What size are those sockets? For the primary and secondary
On 700 hdx prowler, drive belt broke and was wrapped around secondary clutch. Removed secondary clutch nut easily. Primary clutch nut will not come off. Tried 3 impact wrenches with some heat. Any ideas?
Did you ever get it off? I’m having the same problem
I have a 2008 650 h1. When I thread the cover bolt in to spread the secondary clutch. The bolt hits a ring washer in between the inner and the outer of the secondary clutch. It basically bends the large ring washer and still spreads the clutch. Is this normal? It doesn't seam right
badass, I am having trouble figuring out what the problem is on my 2009 TCat. I get alot of clutch chatter when I his the throttle. I followed your vidoes which were EXCELLENT. There was nothing wrong with the primary and secondary. I do have play in the secondary shaft to about 1/16" in and out, not up and down, There is nothing else visably wrong. If you have time, I can send you a quick video of my progress. ANY suggestions would be great,
Hi there was wondering what the bolt size is to open up the secondary? Thread size.. I have a mudpro will still be the same?
i ahave 97' arctic cat 250 2wheel drive 5speed. the shifting lever will stick when shifting gears. i have to kick it into gear. what is wrong
These videos are great...very well done! I have a 2007 650H1. The Clutch and housings look the same...are they? Is the dis-assembly page still available? Do you have the torque specs for the nuts and housing bolts? I could not find it on the website.
i have no clue who this guys is but he sure knows what he is talking about
;)
do you have any thing on rebuilding the primary clutch
wondering if anyone can help me out we took the belt off a 2003 artic cat atv the pully on the right faceing the atv is fully closed how do I get it back open to put on the belt?
Good video
good thanks for the tips
can,THE REMOVEBELT cover 2010arcticatprowlerxtz1000
driven pulley in open poss. can,t remove belt cover!
thanks for this vid
what size sockets are those?
Trying to figure that out myself. You happen to get an answer?
@@jess1860 1 1/4 and 1 7/16
@@dougreynolds9381 thanks alot
Wow they told me at the dealership that it would take 1.5 hours of labour at $105 an hour plus tax plus the belt to replace. It seems like this can be done in under 10 minutes with the right tools.
👌🇺🇸
can,THE REMOVEBELT cover 2010arcticatprowlerxtz1000
driven pulley in open poss. can,t remove belt cover!
driven pulley in open poss.
can,t remove belt cover!
can,THE REMOVEBELT cover 2010arcticatprowlerxtz100