I Scanned My Mustang And The Results Surprised Me!
ฝัง
- เผยแพร่เมื่อ 6 ก.ค. 2024
- On this episode I show you how to scan your car for check engine codes. Ford Motor Company introduced computer controlled cars in various models as early as 1981. In doing so, they also introduced what is know as the OBD1 system for reading, diagnosing, and understanding what is going on with the various components of your computer controlled car. In this video, I show you how to test you car for both key on engine off codes, as well as continuous memory codes. There is another test you can run called the key on engine running test as well.
🔗 Link to OBD1 Code Reader: amzn.to/3VhZyxH
💥If you like this video, you might also enjoy some of my other Foxbody Mustang related Content:
📽 93 Cobra Vs. 20 GT350: • Foxbody Mustang 5.0 19...
📽 Which is the BEST Foxbody: • Buying a Foxbody Musta...
📽 Foxbody Burnouts & LOUD Exhaust: • Fox Body 5.0 Mustang E...
📽 TOP 5 First Foxbody Mods: • TOP 5 MUST HAVE First ...
📽 Top 10 Reasons to buy a Foxbody NOW!: • Top 10 Reasons to Buy ...
📺 If you like my content and you haven't already, please consider subscribing to stay up to date with my latest videos ⤵️ th-cam.com/users/KASLCustoms...
🔥 KASL Customs Shirts & Hats: kaslcustoms.myspreadshop.com
🔥 3D Printed Antenna Delete Plates: etsy.me/3sxfuPM
✅ Follow me on Facebook: / kaslcustoms
✅ Follow me on Instagram:
/ 92lx5.0
/ kaslcustoms
@92LX5.0
@KASL Customs
🎧 I also co-host a Foxbody/automotive related podcast called: “Rollin in my 5.0” We upload a new Podcast episode every Monday morning. Our Podcast can be found on both Spotify and Apple Podcasts at the links below:
Apple Podcast:
podcasts.apple.com/ca/podcast...
Spotify Podcast:
open.spotify.com/show/5OI5X0U...
I upload new videos every Tuesday @ 12:00PM PST (3:00PM EST); and periodically I upload short clips throughout the week.
Thanks for Watching!
#ford #foxbodymustang #checkengine #kaslcustoms
*Please attempt any and all modifications and automotive endeavours discussed on this channel at your own risk* - ยานยนต์และพาหนะ
I just subscribed. Thank you for all of your foxbody content, it sure helps me a lot. I have a 1991 lx hatch with aluminum heads, cobra intake, equal length shorty headers and stock cam. Runs great with no check engine light until it’s at wot and goes out a couple seconds after I let off the gas pedal. I will definitely be purchasing one of these code readers. Thanks again. All the best.
Thank you sir! Glad to help 👍
Thanks for doing this one buddy Amazon should give you commission for all these code readers they’re going to sell😂
hahaha I know right!
I bought this scanner for $26 like 6 years ago. Best investment ever!!!
yep 100%
I have heard the older ones are the best (better built quality), i got mine like 10 years ago,what happens with the new ones is the brass colored pins that connect to the car have a tendency to come apart from the scanners board when you remove the diagnostic plugs,i like mine alot too,it works great.
Definitely using your link, thank you
Awesome, thank you!
Been looking for this!!! 🎯
Nice!
Jeepers! 😳
Nice vid! 👍🏼🤙🏼
Thanks buddy!
Good stuff as always man! Thank you!
Thx bro!!! 👊👊👊
Awesome video and thank you for sharing the Amazon link.
Thank you! No problem at all
Wow that Many Different codes? There were Only 20some for my Fiero & S-10 back in the day. Took up up only two pages in the Haynes manuals. Maaannnn with that many codes that could Go Wrong with those Ponys, You sure there Ain't Two Volumes of books to Order to cover all those?? LOL lol ... Once Again Very Good Helpful video. If I don't comment before hand.. To You & Yours Have a Very Merry Boxing Day.
Thx buddy! Same to you
Thanks for doing this I am buying one!
Yessir you bet!
Thanks for the info
You’re welcome!
Valuable video Brother! I appreciate you taking the time to make it. 💯👊🏾 To bad you got the 67 code instead of the 69 you were looking for Bro! 😉😂
🤣🤣🤣. Thx buddy 👊👊
I have a 1994 Ford Escort wagon Lx that's pretty clean and this scanner helps me stay on top of diagnostics. Good video!
Nice thank you
Got an obd1 reader for my 1994 mustang gt, but funny thing is the 94-95 mustangs gts were obd1, but also had obd2 ports that weren't plugged in to anything, interesting quirk
From what I've read they were in the process of converting to OBD2's and some early cars didn't get them, the harness had the plug but it wasn't used, etc
I wish I had this video 1 month ago, when I was checking codes. I’m a pro now 😎, great video!
Hahahahaha - atta boy!
Such a great video Kasl! And just in time my friend. Needed to watch this as my ‘93 Cobra for some reason started flashing the check engine light. On and off thru gears… weird. Never before until after a weekend drive recently. But I bought this lil OBD1 scanner and this vid is perfect! Here’s hoping for a successful trouble shooting sesh! 👍🏼
Thx buddy! Let me know what you find
Not necessary to remove the assembly from the shock tower. Pull from the cover from the bottom, grasping the wire loom. Mine is a 1993 Ford Ranger.
i have been looking for one of these for a minute and they have one for gm too blessings
Right on!!!
Lol great video at a good time car has a surge on start up. So I just bought the same code reader form Amazon
Nice! Hope it helps
definitely worth every penny I paid $21 for mine gotta be pretty cheap to count flashes
yep I agree 100%
Good video. My 88 does not have the separate one wire plug. The one white wire with red stripe is in the bigger tester plug. I'm going to see if I can get the wire out and so I can get it on the OBD1 reader to do the test.
Thank you! Good luck and keep us posted 👍
Hi Gary. I'm hoping you post a quick video on what you found in the book about the codes that triggered on the reader. Also, if you have time, run a check on Ruby and let us know what you found there. Great video. Thanks. Bill.
Ok sounds good buddy! I’m a little tight on time these days but I’ll see what I can do 👌
@@KASLCustoms Hi Gary. There's no hurry what so ever. My car's put away until spring, and as my shop isn't heated, I won't be doing anything to it until then. This is my do stuff in the house where it's warm time of year because, you know, if the women don't find you handsome, they should at least find you handy. Yeah, I love Red Green. Enjoy your evening. Bill.
🤣🤣👊👊
With that set up there is also a cylinder balance test that can be done with the engine running. It will basically tell you the health of the engine. One by one it will stop each fuel injector for each cylinder. Takes just a couple minutes to do. The instructions are in the manual 👍🏻
Yup very good point. Thx for sharing bud!
KASL, can you clear codes with this scanner or just pull them?
Thanks for this vid it was great just like everything you post. I just ordered the unit it's on it's way🍻
Thanks so much my friend! No you can't clear codes with it but there is a procedure for doing that. Have a quick search on TH-cam - there is a Ford Mechanic that has put out a video on how to do it 👍
Great stuff now fix that fuel
Pump Circuit lol
🤣 will do!
🔔😎That looks exactly like the one I bought on clearance sale about 15 years ago for $ 7.
I still have it in my electronics bag, I saw it yesterday. Don't know the brand without looking. 👍👍😎
I'm always surprised that almost nobody has heard of the KOEO/KOER test sequence. Invaluable for diagnostics.
Thank you for sharing.
1990 HO T5 😎😎
93 TBird HO
94 Town Car beater 4.6 OBD1.
LOL its true!
Ok Gary, PLEASE 3D print that cover and sell them. I'd like one. PLEASE!
That’s a great idea! I’ll put it on my list 👍
Let me ask you something, i have a 91 and a 89 Mustang and i have one of these scanners and i love it, my question is, arent there more modern scanners for these OBD1s? ive heard of ACtron and all that and ive also heard that they really are for OBD2s but will do some OBD1 etc,you have any info on this? thank you for your time.
Sorry I do not...
🔔😎Yours has a power window motor above the brake booster?
Must be a really neat windshield 😆😆😆😆
BTW you can take the OBD connector out of the holder without removing it from the shock tower.
That does explain a lot. My car has manual windows, maybe I can hook them up to the wipers. I'm thinking duct tape. 😀😃😄🙃
LOL - I honestly had no idea what you were talking about at first and then I re read your comment, went back and watched my video and pissed myself laughing!! LOLOLOLOLOL! Definitely screwed that one up royally 😂
🤣👍
@@KASLCustoms Hi Gary. I'm glad you got a laugh out of it. As you've probably realized by now, I look for the funny in pretty much everything. Oh yeah, I lied, my car has power windows. Anyway, talk to next time. Bill.🦊😄
🤣🤣 thx Bill you made my day 😉
Noticed you don't have caster/camber plates and your car is lowered... How does it drive and how is the tire wear?? Thanks for the video, I'm gonna have to invest in one of them!!!
No I don’t and in all honesty, it hasn’t even had an alignment since it was built in 1992 😂. It rides really good and I do not have any odd ball tire wear to report. I could use a bump steer kit but it’s been lowered since 1999 so I guess I’m just used to the way it “handles” and tracks
You’re going to leave us hanging on the codes!?!?!
LOL sorry I can't even remember what popped up now