To the angry mob out there who bought V1, you can get the V2 lens if you send Caddx a message on Facebook. They will send you the lens for free. Based on the angry feedback it would seem to be better if these companies don't improve their products so quickly. Should we advise them to hold this improvement back 3 to 6 months more and allow even more people to get the V1 lens that seems to be so hated? The angry mob complains when companies don't improve their products fast enough, they complain when they improve their products too fast. The FPV community sure is a tough crowd to please...
Can you imagine if Samsung or Apple released a revised mobile phone every few months!? I think you should advise them to do more work and testing before rushing to market in the first place.
I much rather a company notice there mistakes and take care of it then sit on there butts and do nothing. They need to do more research to begin with and listen to there tester but fixing now is much better then 6mo later.
There are too many idiots in the FPV community. Fundamentally, there was nothing inherently wrong with the original Tarsier. It worked. But people wanted more. Now they get more, now they complain. Idiots.
I couldn't believe when I saw the title: V2 already? I had to watch it immediately. Despite all of its flaws, the Tarsier is still the best split camera out right now and we get a new version! It probably should be V1.1, but hey, it's an improvement still. Thanks for the video!
@@then00b62 Interesting. I saw it in the bottom right too. I will have to look at my own Tarsier recordings to see if it has that, but I do not have an ND filter. Maybe Albert can reply about his video.
Thanks Albert! Think I'll wait for V3 or check out the Hybrid. Nothing has been done to justify calling this a V2. No weight reduction. The firmware upgrade and the lens should be made available to those of us who bought the first one and can only get usable footage from 1440P. I bought 2 of the first one and I like 'em. I just don't love 'em yet :)
I've purchased two Tarsier V1's, and one has died. I'm now needing another combo FPV/HD camera. SUPER EXCITED to see a Tarsier V2/Runcam Hybrid comparison video!!
I'm interested in the HGLRC Sector132 and I'm wondering if this camera is worth the $20 price difference between the Tarsier and the baby turtle version of the drone. What do you think?
Better fov then v1. Video looks pretty good to me. I'm interested in how it compares to the runcam hybrid. I'm collecting the parts for a 7 inch build. The camera will be the last thing I purchase. Thanks Albert
The last video clip with you flying, was that in 4k? I am currently at 1080 but might try that 1440 with the superview. I'm afraid my computer would choke on 4k, LOL. By the looks of things I have the V2 but it came with none of the other goodies but it was in a BNF, the Cinepro4k
What is the FOV in degrees for the 4K lens? Doesn't look like you got much fish-eye, so perhaps that was taken out in post processing? Can you output the NTSC FPV video to a separate higher power VTX? This looks like a possible option for an upgrade to an old UAV (XK X380). Input V shows high limit of 12v .. does that rule out 3S battery? (12.6 - 13.0 vdc) Thanks .. looks good.
The V1 has an offset recording image on the HD cam to the right, compared to the FPV image, due to faulty cropping in the settings 2.7k and 1440p. Is this still the case in the V2 version?
Albert Kim I personally noticed this when I was wondering why my captured footage did not match quite exactly what I remembered seeing through the FPV feed and I could easily see this comparing the FPV feed and the HD feed side by side on the bench (FPV monitor vs. iPad App HD Live footage). But also someone else noticed it and posted a good illustration on the caddx facebook page: facebook.com/203116310421889/posts/507675069966010?sfns=mo
Hello Albert, Thanks for the great review. Tell me please, does HDCAM record everytime immediately after power is on? or there is some option to disable automatic recording? Thanks
Caddx said all over Facebook that they would send new lenses to everyone with a v1 that wants one. I messaged them about it and got nothing back. Would be great if they do but I'm skeptical for now
@@AlbertKimTV on the caddx page where they announced the v2. Responses to angry v1 owners. If they do I'll be very impressed. I've personally had no issues with mine other than the fov being a bit tight
Oh neat, I was wondering are you able to use the had wifi on your phone as a "FPV" like you can with dji drones? or is the hd wifi intended for something else?
nice video, is a smartphone required to use this for setup or whatever the phone is for??? I dont want to have to use a phone or betaflight etc etc I just want to wire a cam that also records 1080p to a video TX is this possible....thanks for looking
As long as you're OK with the stock settings, you don't need to change them, however, you will need to format the SD card properly. It's easiest through the app. You can do it on your PC but I heard you need a special program. Sorry, don't know what that is.
Great video as always, am wondering if those of use with the v1 can also upgrade the firmware? cant seem to find a download of it anywhere to make my v1 a v2 after recieving the lens
The boards are actually very different. V2 has more capacitors and resistors for better processing I’m guessing. They probably re organized and found more room.
What did they change/fix in the firmware? Did they fix the 2.7k 4:3 that was squashed into 16:9? Does linear mode or stabilization mode work better or the same?
Hey, Albert - thanks for the preview of the V2! Could you post what firmware version your V2 unit is running? Any idea what the differences are? I just got my Tarsier in the mail last week and I see in the app that the Firmware/Software Version is 11.8.4.1.20190805. That's newer than some other folks have, I'm sure, and I've noticed that my unit does not have the EIS enable/disable option in the app that I've seen in a post on RCGroups. I wonder what other differences there are...
@@AlbertKimTV Thanks! One more question. Is there a way to stop auto recording when battery is connected? I have tried every setting and it still auto records. I want to manually start and stop recording.
me, help me, I bought a caddx after watching your video, I bought the V30 SD card 128gb scandisk, but I even formatted as you indicated, still accusing NO CARD
all about the fpv feed imo. that was the downside of any other. even the runcam hybrid. the racer chip is mediocre. the tarsier v2 literally looks like the ratel which i use solely. im ready to buy...
Hi Albert! Ive just bought one but im seeing issues with rf noise with rx and gps, do you know anything about this? Has it happened to you! Keep it up man!
I had Tarsier interference with a GPS. I eventually got it to work, but required lots of tin foil to resolve and still never got a great signal with the Tarsier powered up.
@@WilliamSmith-jq1er Those are not good news for me haha. Theres one on my way for a new quad. GPS will be literally out of the drone on the rear part of the drone, but im not yet sure if it will work. What have you covered in tin foil? Camera board i guess? Thanks!
Footage looks good...so you dont need DJI to have footage this clear it seems ? or is it only this clear because its DVR and the skyzone used at the time will look noticeably less impressive ?...sorry Im new to this hobby and its overwhelming the amount of info to learn,lol
This is 4K footage recorded to the onboard DVR. The analog feed is much lower quality. See this video for that... th-cam.com/video/Sp75nIVm1TE/w-d-xo.html
@@AlbertKimTV I actually have that cable. Was hoping this setup supports Modes tab Cam 1, Cam 2 , Cam 3 functions. Of course enabling runcam in ports tab. Full report coming up.
Hi, on the specs it mentioned dual micro, but is there a way to get audio on the fpv feed? Can't find anything on that in the manual or pinout that gives where i should connect for that.
I got one since it seems pretty good, although it is just me, or is it recording at what looks like 720p or 1080p when obviously set to 1440p60 or 2.7k60? The video looks soft and I have to do a lot of sharpening to try and get out a bit more detail. I have checked focus and cranked the sharpening within the camera app.
do u know how to flash tarsier firmware? i have an issue with my video result, setting already 4k/2.7k highbitrate but the result seems to be like 720p. even worst at night.
Hello, how can I Update the Cam, I have a 2019 version and no setting for EIS. Which software is trustet? If I fly from darker to brighter, as example inside to outside then the Cam will change slowly the brightness from outside. Thx
@@AlbertKimTV Hello Albert, thanks for your very fast reply. I saw many Videos from you, thanks for all these helpfull an infomativ Videos. Finally I follow you now🤣 Regarding your reply, that's not good to hear, is there no Chance to upgrade from my 2019 to 2020?
I dont understand the shock behind a V2 already. Foxeer an Runcam have been cranking out new version of their product every other week for years. Look how much time passed between the Predator Micro and the Predator Micro V4. Soon as I saw the Tarsier, I was like, "I'll wait a couple of months for V2."
Hi , i bought a tarsier V2 , powered it with usb cable , sucessfully cannected the tarsier to my phone with wifi , BUT i can t get the camera detected by the CaddxFPV APP. At this point i should see the enter camera button on the app but only get a conect camera button that does nothing , athough the camera is aready connected. Any help you be apreciated , thanks.
@@djalmaribeirodrone thanks for your input , the issue on my side was that it is required to disable the data in order to establish the wifi connection .Works fine now.
Gday Albert, the tarsier v2 looks great, is the fpv view better than the v1, are you able to show us that view. Great review as always Albert.👍🛸 Do you have a price for the v2?👍
Your recordings always look better than mine. When moving fast and during manoeuvres I'm always getting washed out pictures and dark pictures while turning in and out of the sun. And also in bright conditions it takes forever till the horizon actually appears in the whiteout. I don't think my v1 could compare to any decent action cam. Some optimized firmware would really be nice, like runcam is at least trying with their cams.
Yes, I have it in my Acrobrat. It took some time to figure out how to get it to fit, but I eventually got it and that is my favorite micro quad to record HD with because it flies so well. I had to mount the camera upside down. Maybe I can do a short video about that drone soon if I get some time.
I just remembered that I recently posted a video about going to a mountain bike race, and at 2:00 and at 4:00 I briefly show my Tarsier Acrobrat, and at 6:30 I show flight footage from it.
I will no more buy Caddx product. No gut experiences with Caddx Turtle v1 and Tarsier. They no give any coupon to those who have bought the first crap. I am waiting for FOXEER dual lens version.
Hi sir had a crash with my tarsier. The hd lens got loose and focus is gone. As u knw we can only adjust hd through mob app. Iam not able to get focus it looks good on mob with pattern check but wen i recod the see in big screen it looks muddy and like painting completly blurred. Any clue how this can be solved?
![🔴 ฟุตบอลแชมป์กีฬา 7HD แชมเปียน คัพ 2024 [รอบรองชนะเลิศ]](http://i.ytimg.com/vi/zPm8ClLVhoE/mqdefault.jpg)
To the angry mob out there who bought V1, you can get the V2 lens if you send Caddx a message on Facebook. They will send you the lens for free. Based on the angry feedback it would seem to be better if these companies don't improve their products so quickly. Should we advise them to hold this improvement back 3 to 6 months more and allow even more people to get the V1 lens that seems to be so hated? The angry mob complains when companies don't improve their products fast enough, they complain when they improve their products too fast. The FPV community sure is a tough crowd to please...
Can you imagine if Samsung or Apple released a revised mobile phone every few months!? I think you should advise them to do more work and testing before rushing to market in the first place.
I much rather a company notice there mistakes and take care of it then sit on there butts and do nothing. They need to do more research to begin with and listen to there tester but fixing now is much better then 6mo later.
There are too many idiots in the FPV community. Fundamentally, there was nothing inherently wrong with the original Tarsier. It worked. But people wanted more. Now they get more, now they complain. Idiots.
I think they send a lens for you free, because you are a reviewer. I asked them on Facebook and they did not answer at all to my message.
Gavroche: I also don't see how I could get that lens ..
I couldn't believe when I saw the title: V2 already? I had to watch it immediately. Despite all of its flaws, the Tarsier is still the best split camera out right now and we get a new version! It probably should be V1.1, but hey, it's an improvement still. Thanks for the video!
Starting around 7:30 of your video, there is dark patches at the top right corner. Ia that caused by the nd8 filter?
@@then00b62 Interesting. I saw it in the bottom right too. I will have to look at my own Tarsier recordings to see if it has that, but I do not have an ND filter. Maybe Albert can reply about his video.
Thanks Albert! Think I'll wait for V3 or check out the Hybrid. Nothing has been done to justify calling this a V2. No weight reduction. The firmware upgrade and the lens should be made available to those of us who bought the first one and can only get usable footage from 1440P. I bought 2 of the first one and I like 'em. I just don't love 'em yet :)
I've purchased two Tarsier V1's, and one has died. I'm now needing another combo FPV/HD camera. SUPER EXCITED to see a Tarsier V2/Runcam Hybrid comparison video!!
I'm interested in the HGLRC Sector132 and I'm wondering if this camera is worth the $20 price difference between the Tarsier and the baby turtle version of the drone. What do you think?
Yeah Tarsier is worth $20 more than Turtle.
Better fov then v1. Video looks pretty good to me. I'm interested in how it compares to the runcam hybrid. I'm collecting the parts for a 7 inch build. The camera will be the last thing I purchase. Thanks Albert
I'll be looking at the RunCam hybrid soon too.
Will be great if we can put the new lens on the Tarsier V1 Thank you
I like it, a bit better field of view. How do you think it stacks up to the Runcam Hybrid?
I'll let you know later in a video.
hopefully the Runcam will be good as it only has the one board vs. 2.
The last video clip with you flying, was that in 4k? I am currently at 1080 but might try that 1440 with the superview. I'm afraid my computer would choke on 4k, LOL. By the looks of things I have the V2 but it came with none of the other goodies but it was in a BNF, the Cinepro4k
Awesome, Albert! Thanks for the review! 😃
But I honestly didn't see much difference in the FOV. Did you? 😕
It's about a 10 degree increase and it's noticeable to me. Did you see the samples showing the houses? Both vertical and horizontal is wider in V2.
@@AlbertKimTV Well, if you say so... Then I believe. 😊
What is the FOV in degrees for the 4K lens? Doesn't look like you got much fish-eye, so perhaps that was taken out in post processing? Can you output the NTSC FPV video to a separate higher power VTX? This looks like a possible option for an upgrade to an old UAV (XK X380). Input V shows high limit of 12v .. does that rule out 3S battery? (12.6 - 13.0 vdc) Thanks .. looks good.
I’m hoping this would only be a firmware upgrade and lens change for us “ early adopters” 😕
yes, launching a V2 3 months after product launch is very disrespectful to consumers!
Hi Albert, great video! How do you set up the Image Stabilization and the anti-flicker on the V2?
what is the advantage using 2 lenses? many fpv cam using one lens for both fpv and recording.
Looks really good
The V1 has an offset recording image on the HD cam to the right, compared to the FPV image, due to faulty cropping in the settings 2.7k and 1440p. Is this still the case in the V2 version?
What is this? I haven't heard of this one before.
Albert Kim I personally noticed this when I was wondering why my captured footage did not match quite exactly what I remembered seeing through the FPV feed and I could easily see this comparing the FPV feed and the HD feed side by side on the bench (FPV monitor vs. iPad App HD Live footage). But also someone else noticed it and posted a good illustration on the caddx facebook page:
facebook.com/203116310421889/posts/507675069966010?sfns=mo
Wow, V2 already. nice.
Hello Albert,
Thanks for the great review. Tell me please, does HDCAM record everytime immediately after power is on? or there is some option to disable automatic recording? Thanks
You can change that in the settings via the smartphone app.
@@AlbertKimTV thanks
Caddx said all over Facebook that they would send new lenses to everyone with a v1 that wants one. I messaged them about it and got nothing back. Would be great if they do but I'm skeptical for now
I haven't heard about that... Which group did they post this?
@@AlbertKimTV on the caddx page where they announced the v2. Responses to angry v1 owners. If they do I'll be very impressed. I've personally had no issues with mine other than the fov being a bit tight
Nice review. Which FPV monitor are you using looking nice
It's this one.... good for bench reviews but not for flying - bit.ly/2mXbwRR
Oh neat, I was wondering are you able to use the had wifi on your phone as a "FPV" like you can with dji drones? or is the hd wifi intended for something else?
Looking better. What frame did you put it in?
Airblade Intrepid 2.5 inch
nice video, is a smartphone required to use this for setup or whatever the phone is for??? I dont want to have to use a phone or betaflight etc etc
I just want to wire a cam that also records 1080p to a video TX is this possible....thanks for looking
As long as you're OK with the stock settings, you don't need to change them, however, you will need to format the SD card properly. It's easiest through the app. You can do it on your PC but I heard you need a special program. Sorry, don't know what that is.
Great video as always, am wondering if those of use with the v1 can also upgrade the firmware?
cant seem to find a download of it anywhere to make my v1 a v2 after recieving the lens
It doesn't look like firmware updates are available for this camera... Not sure why.
The boards are actually very different. V2 has more capacitors and resistors for better processing I’m guessing. They probably re organized and found more room.
hello Albert Kim, can you give an example of footage at night, I want to see if it is still dark when compared to caddx turtle
What did they change/fix in the firmware? Did they fix the 2.7k 4:3 that was squashed into 16:9? Does linear mode or stabilization mode work better or the same?
Just got a Tarsier a couple of weeks ago (direct from Caddx). It came with a manual. How do I know if its V1 or V2? Any markings on the box or lens?
Look at the lens. Watch the video where I show the lenses side by side
Hey, Albert - thanks for the preview of the V2!
Could you post what firmware version your V2 unit is running? Any idea what the differences are?
I just got my Tarsier in the mail last week and I see in the app that the Firmware/Software Version is 11.8.4.1.20190805.
That's newer than some other folks have, I'm sure, and I've noticed that my unit does not have the EIS enable/disable option in the app that I've seen in a post on RCGroups. I wonder what other differences there are...
I'm not well versed on all the firmware changes so you know more than me. Didn't I show the version of the firmware in the video?
Albert Kim Just watched the video again. You didn’t go into that page of the app in the video, so I didn’t see the firmware version.
Hi Albert I've just received a v2 version and on stock settings 2.7k@60fps the image is not as sharp as yours seem very fuzzy almost out of focus.
The lens may need focusing.
@@AlbertKimTV Thanks is there a set distance you need to focus the lens at?
Have you changed settings for contrast/sharpness/saturation? Or are these stock settings? Thanks!
Stock settings. Always use stock settings for all my reviews.
@@AlbertKimTV Thanks! One more question. Is there a way to stop auto recording when battery is connected? I have tried every setting and it still auto records. I want to manually start and stop recording.
Why do they make the nd filter cover both
Because the lenses are nearly touching and it would probably allow you to get an idea of whether or not you're under exposed
Ryan O'Keefe gotcha haven’t seen it in person.
me, help me, I bought a caddx after watching your video, I bought the V30 SD card 128gb scandisk, but I even formatted as you indicated, still accusing NO CARD
same problem
@@MBilozub you should add two layer of thin transparent tape on top which side is slide in to the board
what program do you use to color grade and fix distortion?
Adobe Premiere
all about the fpv feed imo. that was the downside of any other. even the runcam hybrid. the racer chip is mediocre. the tarsier v2 literally looks like the ratel which i use solely. im ready to buy...
Hi Albert! Ive just bought one but im seeing issues with rf noise with rx and gps, do you know anything about this? Has it happened to you! Keep it up man!
I haven't used the Tarsier on a build with GPS, but I've heard other people complaining about it. Can't say much more about it than that.
@@AlbertKimTV Thank you!! I guess we'll soon know haha!!
I had Tarsier interference with a GPS. I eventually got it to work, but required lots of tin foil to resolve and still never got a great signal with the Tarsier powered up.
@@WilliamSmith-jq1er Those are not good news for me haha. Theres one on my way for a new quad. GPS will be literally out of the drone on the rear part of the drone, but im not yet sure if it will work. What have you covered in tin foil? Camera board i guess? Thanks!
Just ordered this from Amazon. Going 2 use it on my Traxxas rc cars
please-please-please! make a video about yours results!!! Link please!
Thank for review.
Thanks for the information, but how do you turn on Superview in the app? It seems I missed that
It's done in post processing with a program.
@@AlbertKimTV ah, OK, got it, pitty though🤔
Footage looks good...so you dont need DJI to have footage this clear it seems ? or is it only this clear because its DVR and the skyzone used at the time will look noticeably less impressive ?...sorry Im new to this hobby and its overwhelming the amount of info to learn,lol
This is 4K footage recorded to the onboard DVR. The analog feed is much lower quality. See this video for that... th-cam.com/video/Sp75nIVm1TE/w-d-xo.html
It’s a M8 thread mount right? I’d like to a ~76 degree lens on the 4K camera for filming. I got one for my action camera but it’s M12
Yes, M8
Did you ever get the RX TX functionality working...?
You need an adapter cable. The sell it on the Caddx website
@@AlbertKimTV I actually have that cable. Was hoping this setup supports Modes tab Cam 1, Cam 2 , Cam 3 functions. Of course enabling runcam in ports tab. Full report coming up.
Love the channel.
Thank you!
Hi, on the specs it mentioned dual micro, but is there a way to get audio on the fpv feed? Can't find anything on that in the manual or pinout that gives where i should connect for that.
No audio on FPV camera, only 4k camera recording.
I got one since it seems pretty good, although it is just me, or is it recording at what looks like 720p or 1080p when obviously set to 1440p60 or 2.7k60? The video looks soft and I have to do a lot of sharpening to try and get out a bit more detail. I have checked focus and cranked the sharpening within the camera app.
The wifi of the tarsier is 4.2Ghz or 5Ghz? I'm looking it as a tool for digital video streaming
2.4ghz
do u know how to flash tarsier firmware? i have an issue with my video result, setting already 4k/2.7k highbitrate but the result seems to be like 720p. even worst at night.
I wonder if this would fit in a 3 inch Tadpole frame? Anyone know?
bonjour j ai un probleme avec le VTX du betafpv 85x 4k je perds la connection a moins de 2M pourriez vous m aider svp
Hello, how can I Update the Cam, I have a 2019 version and no setting for EIS. Which software is trustet?
If I fly from darker to brighter, as example inside to outside then the Cam will change slowly the brightness from outside.
Thx
Firmware no longer available due to too many user error issues causing camera to brick.
@@AlbertKimTV
Hello Albert, thanks for your very fast reply. I saw many Videos from you, thanks for all these helpfull an infomativ Videos. Finally I follow you now🤣
Regarding your reply, that's not good to hear, is there no Chance to upgrade from my 2019 to 2020?
Which setting did you use, because your Image did have the same brightness.
does the tarsier v2 have micro for fpv and hd?
I dont understand the shock behind a V2 already. Foxeer an Runcam have been cranking out new version of their product every other week for years. Look how much time passed between the Predator Micro and the Predator Micro V4. Soon as I saw the Tarsier, I was like, "I'll wait a couple of months for V2."
People forget easily
What does LDC stand for in the Tarsier settings menu?
Thanks for the footage Albert. Its quite a good picture if you were flying on Mars...I don't think grass really can look that colour...
I think the color profile was very neutral so I color graded it. I think it looks nice now.
@@AlbertKimTV it looks nice but not so natural...
Great view tnx. Can you plz review runcam hybrid and compare these two.
Yes, PLEASE! Would love to see a comparison video with the Hybrid!
maybe i haven't catch that... any info about latency of FPV feed?
It's about 10-15ms
@@AlbertKimTV thanks a lot. Is it worth of purchasing overall? I can buy used for less than 60 bucks. best regards from Lower Silesia Poland
Looks like its now up to 18V as opposed to 13V.. ? Otherwise looks the same.
Hi , i bought a tarsier V2 , powered it with usb cable , sucessfully cannected the tarsier to my phone with wifi , BUT i can t get the camera detected by the CaddxFPV APP. At this point i should see the enter camera button on the app but only get a conect camera button that does nothing , athough the camera is aready connected. Any help you be apreciated , thanks.
Sorry, I don't know what's wrong there. I would contact Caddx support.
@@AlbertKimTV Thanks Albert , i will.
format "64k size aloc" solve my problem
@@djalmaribeirodrone thanks for your input , the issue on my side was that it is required to disable the data in order to establish the wifi connection .Works fine now.
is it quality in FPV ?
Same as V1. Close to the best FPV image around.
Is there a way to tell which version I have?
On V1, the lenses look the same... on V2 they look different
does the board's wifi to phone reach as far as the vtx signal to goggles?
No. That is limited range. Only a few feet.
Gday Albert, the tarsier v2 looks great, is the fpv view better than the v1, are you able to show us that view. Great review as always Albert.👍🛸
Do you have a price for the v2?👍
As I mentioned in the video, the FPV feed is the same as in V1. It didn't change. Only the 4K video changed. Pricing should be the same.
Can we update the firmware on v1 and just buy the new hd lens?
I don't think the firmware is available anywhere, and maybe on the lens, but no confirmation yet. I'll update the description later if I find out.
Yeah, if we could update V1 to the new firmware and lens, that would rock!
have you tried patch antennas on the DJI FPV? (notice how i don’t give a crap about analog)
not yet
daslolo. If you haven't seen the hitler video on the DJI by aerial gp... Lol
@@ugpfpv361 haha I just did
@@AlbertKimTV I'm testing one on thursday
wow you sold me on the v2
Your recordings always look better than mine. When moving fast and during manoeuvres I'm always getting washed out pictures and dark pictures while turning in and out of the sun. And also in bright conditions it takes forever till the horizon actually appears in the whiteout.
I don't think my v1 could compare to any decent action cam. Some optimized firmware would really be nice, like runcam is at least trying with their cams.
New lens, wider/taller FOV, more fisheye effect
Is it a 20x20 or 30x30 stack?
same as V1... 20x20
Will it fit the Acrobrat?
I wasn't able to get V1 to fit... this looks like the same size
Yes, I have one in mine. Sits pretty close to the esc (F1 afterburner) but it’s does fit.
Yes, I have it in my Acrobrat. It took some time to figure out how to get it to fit, but I eventually got it and that is my favorite micro quad to record HD with because it flies so well. I had to mount the camera upside down. Maybe I can do a short video about that drone soon if I get some time.
I just remembered that I recently posted a video about going to a mountain bike race, and at 2:00 and at 4:00 I briefly show my Tarsier Acrobrat, and at 6:30 I show flight footage from it.
Yes, the Tarsier definitely fits in the Acrobrat. I've built two Acrobrats, both with Tarsiers.
Whats the range of the wifi on it?
not far... maybe 3-4 feet?
My caddx 4k gets pretty hot your to?
Yes, this is normal
wow~~4k...
what is the latency
under15ms
Didn't like because you cover the cam with your phone in wifi live streaming so we can't guess nothing about latency ...
Difference: the one board has an SD card in it, the other does not. Lol
Actually, the V1 board says PTV v1.1 and V2 board says PTV v1.3. It is right behind the on/off switch.
Wifi range???
Not far... 5m or so
I will no more buy Caddx product. No gut experiences with Caddx Turtle v1 and Tarsier. They no give any coupon to those who have bought the first crap. I am waiting for FOXEER dual lens version.
That's hilarious. My geprc cinepro with the tarsier v1 just came in the mail TODAY ... smh
What will you say, when you learn about the new 3"cine pro .. :-) those 2" are so noisy..
Yea at that point I'll just get a new camera for the cinepro and transplant the tarsier v1 to my 3" racer 😜
This works with fat shark goggles right
yes
Still not as good as a session with reelsteady. You can buy a used one for the same price.
DarkSagan Try carrying a session in a micro.
Albert, I am falling asleep. The static shots are wasting our time. Over 7 minutes till you got to the dynamic shots. Ugh, thumbs down.
too much fish eye
Hi sir had a crash with my tarsier. The hd lens got loose and focus is gone. As u knw we can only adjust hd through mob app. Iam not able to get focus it looks good on mob with pattern check but wen i recod the see in big screen it looks muddy and like painting completly blurred. Any clue how this can be solved?