I see you’ve started this video in the best car you own! Awesome result bro, sounds so fricken good too. Just gutted it’s going to get chopped by a 1.8L sohc motor 😅. Can’t wait to race haha
Absolutely loving it man just goes to show you don't have to spend 1000s to build a car that you want plus RBs always sound much better with boost haha and maybe a race with Mike Lake 😉
Hi cam. just a question about the turbo oil line. I pulled the oil line off my turbo and started the car for about 5 or 6 seconds to see how much it was pushing. It pushed out about a liter and a half or so in that short time. Is it correct to be pushing that much oil. motor is a RB25det series one. Loving the content keep it up.
Fuckin wicked vids lately dude love all the content. Keep posting as much as you can when you get a chance whether it be work on daily, either of the 33s, helping the misso with her builds, street content ;), repairs on the track car or just anything I'm sure you'll find something to give a crack. Keen to see what's up next on the plate keep up the good shit
I just finished putting my kit in and the car won’t idle. You have a diagram for how to run the vacuum lines? Stock ECU, just trying to run 5 psi of boost. Stock MAF and ecu should be able to handle that much, according to my tuner. I was told to put the maf before the turbo as well, noticed you have it in another place. Let me know if you can!
Sorry for the late reply mate! That’s awesome, you started on it yet? Only thing I would do differently is do head studs (1 by 1) so I wouldn’t have had to replace the head gasket.
Good to know! Nah dude the funds haven't been there lately. Do you know of any places in qld (Brisbane) that are really knowledgeable with the de+t setups for tuning and whatnot?
@@GTD22 I feel that! 😪 I’m from Melbourne man so I only know of a couple. First bet would be Black Arts Factory, but he’s more of a fabricator. Or you could try OnSong Performance.
I was just wondering do you have to do anything to run a turbo on a na motor cause I’ve heard things like the compression is different and you can’t run a lot of boost can anyone let me know love this vid sounds sick
I run 14to17psi in my Na neo it loves life. If ur wanting to run 25-30 u should run a turbo motor or build ur Na bottom end. Keep it reet on TH-cam runs 21ish psi in his Na neo.
The compressive is much higher on non turbo motors. You don’t need to run as much boost to achieve the same hp on them. Bottom end is weaker on just your standard Rb25de s1-s2 but the Rb25de neo have forged rods same as the turbo motors so they are your ideal motor to +T ( they are solid lifters too with higher compression again)
Would It be hard to relocate the trottle body to the front of the manifold ,am actually thinking about trying that on mine have the same setup. Series 1 rb25 tho type m. 4 door
Hi mate great videos love it 👍👍question for you whats your take on the coilovers now it's tuned??? I have a r33 series 1 turbo sedan I'm keen to fit them to .
Was wondering if anybody knows this since i cant find much info on it here in the usa, but i want to build my 33 sedans engine up and was wondering if these de engines just needed rods and pistons to run over 400hp or is there more things needed?
Those things would help but arnt really mandatory. My S0 rb25de made just over 400hp on stock internals and stock head gasket. Ethanol definitely helps though with being able to run more boost etc
holy crap that sound is exactly what i’m trying to go for. Thank you for making these videos man they are helpful af
No worries man! i sadly got rid of this car, god i miss it!
I see you’ve started this video in the best car you own! Awesome result bro, sounds so fricken good too. Just gutted it’s going to get chopped by a 1.8L sohc motor 😅. Can’t wait to race haha
this guy 🤣🤣
Thanks bro, so stoked. Hahah so keen bro! Will be a heap of fun
Awesome result man, glad it all worked out.
Amazing sounding dose btw perfect!
Thanks bro appreciate the love! It’s amazing hey!
Makes the same power as my 33 at the moment, these things absolutely rip! Have fun dude
Is a air flow meter nessecary?? I thought you were using nistune which requires a afm??
Absolutely loving it man just goes to show you don't have to spend 1000s to build a car that you want plus RBs always sound much better with boost haha and maybe a race with Mike Lake 😉
Built n/a RB's sound good too
What’s the song called you always play mang? 9:47 in this vid 🤙🏻
Give themselves - Berry Deep
Can’t seem to find it on Spotify but it’s on the app I edit with
chur bro should do a parts rundown and cost🤙
I’ll definitely do that!
Hi cam. just a question about the turbo oil line. I pulled the oil line off my turbo and started the car for about 5 or 6 seconds to see how much it was pushing. It pushed out about a liter and a half or so in that short time. Is it correct to be pushing that much oil. motor is a RB25det series one. Loving the content keep it up.
Dose pipe myth busting !!
Love it
Best men 🥳
Thanks bro! Haha
Yeahh the boyyss. Happy as broskii I. Good vid as alwayss
So stoked! Thanks bro ❤️❤️
Fuckin wicked vids lately dude love all the content. Keep posting as much as you can when you get a chance whether it be work on daily, either of the 33s, helping the misso with her builds, street content ;), repairs on the track car or just anything I'm sure you'll find something to give a crack. Keen to see what's up next on the plate keep up the good shit
Thanks brother I really appreciate the comment! I’ll be sure to try and post as much as I can when I’ve got content to film!
Bro, whats is you tune setup? Stock ecu? Injectors size? Afpr?
gotta love RBs and oil.
I just finished putting my kit in and the car won’t idle. You have a diagram for how to run the vacuum lines?
Stock ECU, just trying to run 5 psi of boost. Stock MAF and ecu should be able to handle that much, according to my tuner. I was told to put the maf before the turbo as well, noticed you have it in another place. Let me know if you can!
I don’t have a diagram sorry man! are you running stock turbo setup?
Loved the whole series ❤️
I'm gathering parts ready to do mine soon. If you would do it all again is there anything you do differently?
Sorry for the late reply mate! That’s awesome, you started on it yet?
Only thing I would do differently is do head studs (1 by 1) so I wouldn’t have had to replace the head gasket.
Good to know! Nah dude the funds haven't been there lately. Do you know of any places in qld (Brisbane) that are really knowledgeable with the de+t setups for tuning and whatnot?
@@GTD22 I feel that! 😪 I’m from Melbourne man so I only know of a couple. First bet would be Black Arts Factory, but he’s more of a fabricator. Or you could try OnSong Performance.
"I CANNNT BELIEVE IT" Yeahhh the doseeee
DAMM dude that thing rips now!!
Yeah it does! So happy with it
I was just wondering do you have to do anything to run a turbo on a na motor cause I’ve heard things like the compression is different and you can’t run a lot of boost can anyone let me know love this vid sounds sick
I run 14to17psi in my Na neo it loves life. If ur wanting to run 25-30 u should run a turbo motor or build ur Na bottom end. Keep it reet on TH-cam runs 21ish psi in his Na neo.
The compressive is much higher on non turbo motors. You don’t need to run as much boost to achieve the same hp on them. Bottom end is weaker on just your standard Rb25de s1-s2 but the Rb25de neo have forged rods same as the turbo motors so they are your ideal motor to +T ( they are solid lifters too with higher compression again)
That’s my glass!!!
🤙🏻🤙🏻🤙🏻 love it 😍. Sad build is ended though... what next for the channel ?
Some small engine upgrades, then send the psi to the moon!!
Would It be hard to relocate the trottle body to the front of the manifold ,am actually thinking about trying that on mine have the same setup. Series 1 rb25 tho type m. 4 door
That thing looks fun to drive, I subbed btw
How much boost can you run on these motors? Currently looking at a skyline with a DE motor and i was wondering if you can make big power on them
Providing you have upgraded your headstuds and head gasket, id say around 22-25psi. I don’t think I’ve seen many de’s over that. But I could be wrong
Cam so u put a pulsar gtx35 on ur other 33 I've got the same on my r34 and the dose Is weak. How's ur sound?
Sik build series bro, came up mint! 👌🏼
Thanks bro! Appreciate you following the build!
Hi mate great videos love it 👍👍question for you whats your take on the coilovers now it's tuned??? I have a r33 series 1 turbo sedan I'm keen to fit them to .
Thanks man!
They’re a bit bouncy but for the price they’re good. Now it’s got some power they do squat really good! Haha
How much do u reckon it would cost to chuck one of these in my rd28 (diesel Rb)gu patrol
What clutch you running?
At what rpm did it make the power,and how much torque?
I thinks it’s around 3500rpm. I didn’t get the torque read out sorry man
Sounds sick as👍
Thanks bro!
Was wondering if anybody knows this since i cant find much info on it here in the usa, but i want to build my 33 sedans engine up and was wondering if these de engines just needed rods and pistons to run over 400hp or is there more things needed?
Those things would help but arnt really mandatory. My S0 rb25de made just over 400hp on stock internals and stock head gasket. Ethanol definitely helps though with being able to run more boost etc
@@RapidShot my problem is ethanol is a pain in the ass to get here so id have to stick to 93 octane to keep it a “streetable” car
So dope bro
Thanks bro!
Thing rips 👌🏻
Question, is the engine original just de? Not DET
correct rb25de +t conversion
Yep, Rb25de with a gt2835 strapped to the side of it!
Factory unopened 25De? No headstuds or head gasket mod
DOSE BAYBAY!!! 💦
Now to mop the floor with a certain fevo! 😝
🤣🤣 yeah she is the dose machine now!
She rips!
Hauls ass!
Yep sick bro 🤙
love it
why does the bro look like Australian adam lz or is that just me
What wastegate you running
45mm turbo smart
@@CamMartonDrift thanks bro!! Also you better do some more driving vids i could listen to that all day
Yewwww 🤙
Hi brother great job. What ecu you used
Mint 👌
dosing me owt
the ausie adam lz
You look like adam lz
Who dat
Drop 4th
I don’t wanna mince the box now come on mate
That sounds so mean
what boost gauge you running?
Some sass one I got from Autobarn
@@CamMartonDrift haha nice! also what coilovers are those?