How To Cut Mini Blinds To Width Quick & Easy!
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Sometimes the mini blinds are too wide to fit the window. This is when you need to know how to cut mini blinds to width. It's not as hard as you might think. I was at Lowes one day and asked the "associate" to cut these blinds for me and he said that you couldn't trim the basic mini blinds!
So I told him that would be alright. I went back to the jobsite, measured my opening one last time, taped each end of the blind tightly and used my miter saw to cut on the mark I made after measuring the blind to length!
These mini blinds that needed cut to width were Project Source mini blinds from Lowes. They were just a little to wide to fit the window opening.
One tip I would give you is to completely tape the ends. Then make your mark on the tape before cutting the mini blind to width. This will help keep all those little pieces from going everywhere after you cut the mini blind.
One more tip about cutting your mini blind to width is after you cut the blind, take a sanding block and round over the ends to match the opposite side. Do this before removing the tape.
Also, as mentioned in this video, if your mini blind needs cut more than a 1/4", it's a good idea to cut equal amounts off each end. This will help the mini blind to look balanced and not lopsided.
You can cut a mini blind with a miter saw like I did in this video or use a hacksaw or even a handsaw! No special blade is needed. Just make sure the ends are taped tightly. If using a miter saw to cut your blind to width, just make sure the saw has reached its top RPM before cutting. And cut slow or else you run the risk of chipping the edges.
For more information about this and other subjects, visit my blog at bluecollardiy.com
Be sure to tune in to the Blue Collar Entrepreneurs Podcast. Lots of information about starting and running your own Handyman or Home Inspection business. You can find it here: anchor.fm/dona...
Click the little BELL symbol below so that you'll get notified each time I post a video.
Don't forget to 'Like' and 'Subscribe' below. Also, be sure and add this video to your Playlist!
Follow me on Social Media!
Facebook at: / bluecollardiy
Twitter at: / bluecollardiy
Instagram at: / bluecollardiy
/ bluecollardiy
#cutminiblindstowidth #howtocutminiblinds #miniblinds
![ตีสิบเดย์ [FULL] | นางเอกหมอลำเงินล้าน "อุ๋งอิ๋ง เพชรบ้านแพง" & ไฮโซสาวสุดฮอต "ลิลลี่ เหงียน"](http://i.ytimg.com/vi/jPxQS_EgrJ4/mqdefault.jpg)
My husband can do about anything. The lady at Lowes said they could custom order my 74.5"W × 58.5"L vinyl blinds for around $250. I'm just going to buy their 77" blinds and have my husband (customize) them thos weekend ... lol... thanks a bunch for your video. I knew there was a cheaper & better solution
Congrats on your new blinds. I'm glad I could help! Cutting blinds is really easy. I had the guy in the blind dept at Home Depot tell me you couldn't trim blinds without a special saw like they have...lol I told him to come watch this video :)
@@BlueCollarDIY those people at the box stores will sell you the Brooklyn Bridge if you’re not careful.
Thank You! Getting ready to cut the same exact ones. I was going to use a table saw.....but I like the miter saw idea better and didn't think of it till seeing this.
Thanks! I'll try this on a mini blind this is 1/4 or so too wide. I was going to cut it with scissors and a box cutter for the top/bottom. This looks much easier.
Working one rental too. I was about to just buy the more expensive blinds from lowes, but now I won't have to!
If any of you don't have a mitre saw, you can use a cutting wheel on a Dremel...same results, quick and easy
Great idea
Mystery solved! Thanks, Donald!
Found this video very helpfull, Thankyou for sharing 👍🏼
That's great to hear Linda. Thanks for taking the time to let me know that you found this video helpful! I appreciate that!
How to cut blinds. (Doesn’t show blinds being cut)
If you can't cut blinds after watching this video...I got nothing for ya! lol
awesome video!, sadly I need it for a blackout paper blind ☹
What a minute, you produced a video about cutting down blinds, and you left out that very thing! That's like watching the beginning and the end of a movie, not seeing what happened in the middle. A "How to cut blinds" video that doesn't show cutting the blinds!
Nice video. I was wondering what I was going to do about my windows till I saw this video. What kind of blade are you using on your miter saw?
Just a standard cross cut 24 tooth blade. But a finer tooth blade does a better job of cutting blinds on a miter saw.
Geez man I wish you would have filmed you cutting it.
Sorry Julian. Next time I cut mini blinds, I'll film it and post another video. It really is simple whether you are using a handsaw or miter saw.
@@BlueCollarDIY Awesome thanks! I am going to cut them tonight and it was the only part I was a little sketchy on. We'll see how it goes!
@@julian3898 I wish you all the luck! Let us know how it went cutting your first mini blinds!
@@BlueCollarDIY If it's simple, then, do it and show us: You don't need another rigamarole video to do this, especially if your title specifies that you would do it in this video.
I'm going to try a sawzall for aluminum. because I'm too lazy for the hacksaw 😅 fingers crossed 🤞
very helpful. thanks
Very helpful. Was wondering how to do that. I wonder how the stores do it??
They have a machine they lay them in, slide a stop to the width they want to cut, close the hood and start it. It's pretty quick for cutting mini blinds to width.
Home Depot/Lowe’s won’t cut vinyl mini blinds, just the aluminum ones
I need to cut 9 mini blinds in my bedroom, where the blinds are mounted outside the window...I will just be using the “frame” of the blinds to make new window coverings from fabric, that will be mounted INSIDE the window frame (think roman shade-style)...my question is can I use a jig saw? Or a Dremel with a metal cutting wheel? I don’t have access to any other saws...
When you say the "frame" of the blinds, are you talking about the very top piece? If that's all you'll be cutting, then it is rigid enough that you should be able to cut it with either of those tools. If you'll be cutting the top piece plus the blind material, you're going to want to make sure the ends are secured tightly or you'll have a sloppy cut.
@@BlueCollarDIY well, yes & no...yes the top is what I will be using..but I will CAREFULLY take apart the blinds, leaving only 4 slats, that are evenly spaced, the length of the blinds. (I definitely don’t need a saw to cut the 4 slats down to size...I’ve got heavy duty scissors or tin snippers that should easily do that job!) And leaving only the strings that function to pull the blinds up & down. It sounds very complicated but really isnt! There are a handful of tutorials on TH-cam!! Thank u for your reply!
@@lauriee5200 Sounds like you have it nailed down! If you're only cutting a few slats plus the top bar and lower bar of the mini blind, then your saws should do the trick. Just remember they need secured or your saw could wander around. You can also pick up a fine tooth hand saw at Walmart. The saw that comes with the plastic miter boxes in the hardware section are great for this! I think they're about $10 or so.
@@BlueCollarDIY I forgot! I do have one of those!!! With the miter box!! Lol! Thank u!!
@@lauriee5200 You're welcome! Good luck with your blind cutting project!!!
Saw at you at Embracing Detours . I always used a hacksaw, but not with tape on it...so this was nice to see. We have some videos you would like check us out
Thanks for stopping by and commenting. I love Embracing Detour's channel. I'll be sure and check your channel out as well. Glad you found my video on cutting mini blinds helpful!
Didn't show them being cut
To Blue: WHAT TIME DID YOU CUT THE BLINDS IN THIS VIDEO?
New videos ?