I thought the pick point for the cards on the Behringer stuff was straight of the preamp. Does the Wing have actual inserts that allow you to insert the cards i/o in the channel. Otherwise aren’t you still are sending a double patched channel the rack signal as well?
Hi @drewbrashler I have a X32 with a snake cable box with 8 outputs on stage, i also have the sd16 for an additional 8 outputs. How do i route my mixer to take the first output from my xir output and the other 8 outputs from the SD16 stagebox output.
I would be interested to see what you are trying to do. Ultranet is 16 outputs, you can get the DN4818-O sweetwater.sjv.io/VmyKVa if you wanted to convert the 16 Ultranet outputs to XLR outputs. Then depending on how you route it, it could be really whatever you want to use it for. For instance you could have it as a digital split to give 16 channels of outputs right after the preamp, or you could use it as 16 outputs. Hope this helps!
@@clash_new_taipei "brooklyn3" and as far as I know, the brooklyn3 module works fine in the regular expansion slot, we're just waiting on new firmware for the internal slot
![โอ้เธอช่าง... - บี้เดอะสกา ft. ต๋อง เทวัญ (Prod. by ป๋าเพชร) [Official MV]](http://i.ytimg.com/vi/zbWhiLFmVL0/mqdefault.jpg)
Great vid!
Any chance you can do a video on separating out the audio for IEM’s without Waves? Thanks!
Thank for explaining
I thought the pick point for the cards on the Behringer stuff was straight of the preamp. Does the Wing have actual inserts that allow you to insert the cards i/o in the channel. Otherwise aren’t you still are sending a double patched channel the rack signal as well?
I wish these things had RME drivers! The TheSycon drivers it has are decently stable, but just so sadly slow
Would this be the same with LiveProfessor?
Also, is this round trip accounting for the latency added by each plugin?
Live professor latency is far better than this!!!
Hi @drewbrashler
I have a X32 with a snake cable box with 8 outputs on stage, i also have the sd16 for an additional 8 outputs. How do i route my mixer to take the first output from my xir output and the other 8 outputs from the SD16 stagebox output.
Drew. Can Ultranet can act as that double patch for monitors?
I would be interested to see what you are trying to do. Ultranet is 16 outputs, you can get the DN4818-O sweetwater.sjv.io/VmyKVa if you wanted to convert the 16 Ultranet outputs to XLR outputs. Then depending on how you route it, it could be really whatever you want to use it for. For instance you could have it as a digital split to give 16 channels of outputs right after the preamp, or you could use it as 16 outputs.
Hope this helps!
with Dante card how much latency does it reduce ?
sadly, dante virtual soundcard actually increases latency worse than USB.
@@magoostus no I actually meant the Broadwayii card that can’t be installed on Wing
@@clash_new_taipei "brooklyn3" and as far as I know, the brooklyn3 module works fine in the regular expansion slot, we're just waiting on new firmware for the internal slot
@@clash_new_taipei Broadway chips can only do 16in/16out. so it cant be a broadway chip... unless they're using 4 broadway chips together
@@clash_new_taipei I have good news. the Brooklyn3 Module works mounted in the internet slot!!!
IEM or floor monitors, it doesn't matter. Once, you go pass 4ms it's no good.
Omg! This latency is absolute useless. What are you going to teach your viewers?😱