ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Checking out the new LGRP Gripper tires. Are they really grippers or more like slippers? Let’s find out!
M3 wheel nuts from amazon with 10mm length
amzn.to/3TDUvXE
Injora wheel nuts with 5mm length here
www.injora.com...
LGRP grippers available here
littleguyracin...
Furitek 2FM Chassis available here
furitek.com/pr...
HELP SUPPORT the channel by clicking my affiliate links below to amainhobbies or amazon and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Amainhobbies affiliate link
bit.ly/3CcTUCN
Amazon affiliate link
amzn.to/3aY2lK7
RCAWD affiliate link here
rcawd.com/?ref...
Fcx24 Front Portal axles found here
shrsl.com/3ma33
FCX24 Rear Portal Axles found here
shrsl.com/3ma3h
Metal portal gears found here!
shrsl.com/3lnmv
FCX24 $6 Motor upgrade found here
www.ebay.com/i...
Extended links for the fcx24 found here
Link kit available here
www.ebay.com/i...
Contact me at 2fastmattracing@gmail.com
Purchase PARTS for the Fcx24 or rtr and help support the channel here!
shrsl.com/3la45
FCX24 Portal Gears included in this set
shrsl.com/3la70
FCX24 at amainhobbies here!!!
bit.ly/3yoLwRL
Fcx24 on amazon here!
amzn.to/3nDSCfb
High clearance links used found here
amzn.to/3NfOJaj
RC4WD Stamped steel Wheels used found here
bit.ly/3ntbRbc
RC4WD Scramblers found here
bit.ly/3FT3GgA
Other upgrades found here
Injora brass wheel rings found here
amzn.to/3zVGWM1
Wheel hex extenders used found here
amzn.to/3Oh8FLy
Stock Scx24 driveshaft (long) used for rear
amzn.to/3ndGhOk
FMS FCX24 available here in yellow
amzn.to/39OSMwU
FMS FCX24 available here in blue
amzn.to/3HHAHgJ
FMS FCX24 available here in red
amzn.to/3Oyjvwd
Don’t forget to use the DISCOUNT CODES BELOW
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
TOOLS I USE FOUND HERE
T-handle wheel wrench I use here
bit.ly/3qst079
WORK MAT I USE FOUND HERE
amzn.to/39gcXUb
MIP .050 hex found here
bit.ly/3xOvi45
MY FAVORITE TIRES BELOW
Injora Crawl Master
www.injora.com...
Power Hobby Trail Warriors found here
www.powerhobby...
Rc4wd Scramblers
bit.ly/3FT3GgA
MY FAVORITE ELECTRONICS BELOW
My favorite SERVO for the price (agfrc)
amzn.to/3xJbb7r
Another great BUDGET servo here (Emax)
bit.ly/2SjZXUx
My favorite ESC found here
bit.ly/39jhrtc
My favorite BRUSHLESS motor here
bit.ly/3MIMEU3
My favorite BRUSHED motor here
www.ebay.com/i...
SHOCKS I USE BELOW
FRONT SHOCKS
Injora internal spring shocks (40mm) running on the gray Injora body truck found here
amzn.to/3LR4yDH
amzn.to/3Qgszri
REAR SHOCKS I usually use some sort of long travel shock like these
bit.ly/33j9kde
MY FAVORITE WHEELS BELOW
Treal 1.0 22.4g beadlocks found here (select your color)
amzn.to/3OdTimH
Injora 1.0 wheels found here
amzn.to/3aS4zL5
Hard Park Crawlers 1.0 wheels
hardparkrc.com...
BRASS PARTS I USE BELOW
Treal Brass Steering Knuckles found here
amzn.to/3MYMQit
Injora brass wheel rings
amzn.to/3xom4Kp
Injora brass kit including steering links!
amzn.to/3MKOKmr
Cheap Brass Kit with all parts I change found here
amzn.to/3zGoOW6
HIGH CLEARANCE LINKS HERE
Injora links (select your length)
amzn.to/3zsUTkm
STEERING LINKS HERE
Injora Aluminum Steering links here
amzn.to/39hOzlb
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~
This is the primo 1/24 scale channel.
Really appreciate that!
Yes it is!!!
Love how you keep it real Matt.
Tell it like it is. What good would it do any of us if everything got a great review?
I took the Grippers out today! Wow! My comp rig improved noticeably. Awesome tire.
They did nothing for anything I put them on. What tire were you running before?
@@2fmrc I took off my Hyrax. It’s crazy how they didn’t perform. I wasn’t expecting them to work well on the sandstone in my area. They seemed to be definitely off in your video. I will try the pin tires just to see the difference. Still, nice video.
@@kennethrobinson9008 You gained contact patch from going to a larger tire. It's not super difficult for a 62mm tire to beat out a 54mm tire.
@@derrickwilliams2903 Right! I wasn’t comparing the tires. I replied to a question. I think the Hyrax are amazing for comp. I used the Grippers on sandstone and they kicked butt.
your tire videos always feed my tire addiction. I like your input and opinions. after watching them I have no need to buy my own pair and experiment. unless they look cool to me to buy and replace the old set. I had pats and phased them out after a few months. did pitfall and so on. this brand is the last one I haven't added to my small collection of different brands.
Absolutely love how these tires look 👌🏼 but after getting Pins and Swamp kings it’s hard to imagine anything working better
Yeah those 2 tires kinda ruin ya honestly. I had really high hopes for these after the swamp kings but I was pretty let down.
Yeah I got the ones from Amazon the longer wheel nuts they work great, you get 10 in a pack, stainless steel or brass I got them both
Maybe your plaster is breaking down and leaving dust on your tires?
Common misconception about traction is surface area doesn't always mean traction. IE drift tires. Offroad it's the flexing of the treads in the contact patch. A narrow tire transfers weight to a smaller footprint making more friction. Wider tires displace weight, reducing friction. After riding a TW200 with fat tires behind XR250 and CRF250 for 7 years offroad I'm speaking from full scale experience.
Either way some dust on the tires shouldn’t kill their traction. I usually prefer a more narrow tire myself but lots of people are going all crazy wide with them lately. Not really my thing lol. I think it looks goofy like a mall crawler 😆
I love that Mobile truncates the title as 'Injora FCX24 Whee...'
The scramblers probably my favorite larger tire they got a great tread.
They are really good!
Love it! Thank you for your transparency!
I have fallen victim to the hype and have spent money on disappointment over and over again.
I'm having nightmares about Wheels and tires now . The outdoor crawl area is cool .
That thing is a pure monster! So badass!!! Does it hurt your heart when it doesn’t make climbs? I hate running a lesser tire and not clearing lines. Makes me feel terrible! Lol. Disappointing. Thanks for sharing brother! Rip til ya flip!!
Haha! Yes I get very aggravated when trying out new tires that won’t pull what others will. Kills me!
Keep on your scramblers, we have to wait some more...
You do a killer job man and I think if a company comes out with something they would want somebody like yourself to test it so if there was a weak point you can help him fix it before they even released to the public right have you do a video and keep it tell him what was wrong they fix it send it to you then do another video and like it's fixed they release it you at least the videos and it blows up
Love the honesty in your reviews, keep it up, let the haters hate! I really like those wheels you used in this video, who makes those?
Thanks! Appreciate that. Those wheels are the treal type d wheels. Love them!
amzn.to/3q8dvjJ
Glad I passed on these for the Scramblers. Still want to experiment with other tires, but I will not be getting these.
I agree with Patagonias on plaster cloth. Of course I haven't tried as many as you have but I think the Injora Mud Terrain M/T are at least as good as Patagonias on my plaster cloth (with extra plaster and a few brushed coats of exterior house paint to bury the mesh and so far no signs of wear). My scx24 Gladiator sounds like a cat clawing at carpet while it misses no beat slow crawling that with the mud terrain tires. My C10 with Patagonias was unbeatable out of all I tried but degraded over a short period of time to be about equal. My FCX24 did very very well with Scramblers (at times I think best of all) on plaster cloth in the very short time the damned thing worked. Less that two hours running since first day which was first day of Amazon deliveries. If I was trying to beat someone else I might be interested in the pin tires, but for a scale truck and realistic look of the tires for the scale look not so much. Everything I do is keeping to scale (so far) I am proud of my Gladiator that runs the Mud Terrains on an uncut body with nearly full droop except for about 3/8" of stiff spring to act only as bump stops. Single barrel shocks in front, Doubles in the back. Thanks again for doing what you do for us.
Idk man. I got them last weekend out on a course and they did really well on my rig, but I'm pushing a lot of weight. Unvented stock foams and mine are squishing down a little from its own weight. However smooth surfaces like you said, little rough. That's just due to the lack of aggressive tread I feel though. Definitely an all terrain, not meant for just rocks.
Thank you as always for the unbiased information 🤙🏽
My experience with them was much more positive and I'm running rock/loose dirt in the backyard. Stock foams, no venting (yet), 22g treals with the weighted hexes.
Do you have the pin tires? Just curious if I’m now spoiled lol
@@2fmrc I didn't get those. I have the trail kings and the swamp kings also. I don't care for the trail kings at all, they always seem to endlessly spin and never gain traction, especially so if there's any loose dirt or the slightest bit wet. The swampers are amazing, but as you've commented the lugs bounce it around a lot, but they are really great. I think for these to excel it comes down to rig setup most likely.
I'm glad I watched this, I love a good looking tire, but I've been holding out on these because they cost more than twice as much as some tires that work for me. I would have been pretty upset to find out that the grippers are slippers.
Yeah some people love them but they didn’t work for me at all.
I love my mud terrain M /T’s with flubber stuffers V3 , I did vent the tire and they are performing great. I have The V4 on the way i do believe they are modified those are probably the ones you have the purple ones you was showing. Appreciate you Sharing the video always appreciate
Hi ain’t got no pin tires, might have to try a set. But I will be sticking with flubber stuffers
Another tire to add to my list for outdoor crawling. Also what body is that blue one? I love it.
It’s the hobgoblin body from tinker time Rc! Love it!
tinkertimerc.com/products/hobgoblin
They recommend the FlubberStufferz V3.3 for these tires. I picked up the v3’s before they were released as they were recommended and they fit loose on them. Still work ok but not ideal
Yeah I seen that. They said 3s were good until after I posted this vid. Then I found out about the 3.3s. Not spending the money for Flubbers for these tires though honestly. I’m never gonna run them so it’s just not worth it lol
Those injora crawl masters are actually a pretty good tire! My son loves them on his gladiator I ran them on my cheat code for a while before my son asked for them he wanted them cuz of the size but once he put them on his gladiator they just crushed it. They are a pretty good tire. Give it shot before u don’t try lol. Mounted them on some SSD wheels cuz of the brass rings nd just killed the rocks. So me and my son like them! I actually order them by accident I wanted the other M/T ones not these A/T ones lol.
Dora sells tires? Hell yeah!
Hay Matt?what size are the axial threads on the fcx24 I need to order some
They are m3. I’ve been using these and they work great!
amzn.to/3AJN3BJ
Thank you sir
I wanna like them cause they look good/capable....but this make me hesitant.
I love your videos man. Your always very informative and detailed and you always give your honest opinion no matter how blunt it is. Like you said there is alot of promotional/paid reviews/ and ad type videos on FB and youtube and thats why I love how blunt and to the point you are and you don't sugar coat anything. Keep up the good work man. You are definitely the 1/24 GURU!!!!👍👏🙌
Really appreciate that!
I want a total tyre count..I’m betting your up to 50 sets
lol I have no clue. It’s just a big bin in the garage now. I do give a lot of sets away to locals and stuff if they can use them.
Hi Matt I'm new to this game, can i ask what rig you're trying theses tyres out on because I love the look of it. thanks
😊
All I needed to see I guess I'll get the ugly pins lol
I dont feel like the LGRP tires compare to the Scramblers or pin Tires.
Are the pins your favorite 1.0 tire?
Yes atm for sure
What size hole are you venting on 1/24 scale? 1/8"? Two holes?
I just have a small pair of cutters that I cut a tiny hole on each side with. I use a leather punch on my 1/10 tires but it’s too large for these tiny tires.
Maybe they need a lot more weight?
I don’t have any rigs that weight much more than that 580 gram one lol. Maybe if I put them on a 1/10 truck 😆
What's your top 3 tires for 24th scale looking to order some new rubber?
Injora pin tires. Been cutting them and they are even better I think,little guy racing swamp kings and powerhobby trail warriors more than likely. Those are mostly larger tires but all really good.
amzn.to/3ftjtJG
@@2fmrc whats your go to medium tire?
Dude I guess you and Adam got two different sets of tires because they him they went up everything besides his indoor Force he was struggling on LOL I don't get it and I know you're honest person I'm damn sure not saying that Adam is not honest or just saying that's crazy how two different textures can be so bad for a tire I just got the OG RC big boy pin tires and I'm telling you right now Auburn in Weston we call this yeah a little 2020
Yeah I know they changed the compound on them not long ago. He may have the newer set? I haven’t really heard much negative about anything from him either though lol
Jesus! 8 mins in and 20 commercials! The longer the videos the more adds they make us watch! I think the sweet spot is 18-20 mins for shorter adds.
Wow! Sorry about that. I’ll get on the pc when I get home and cut those out. TH-cam just automatically places them. Not me! But I can delete them hopefully lol
If you watch much TH-cam, just pay the $10 a month for ad free. It’s definitely worth the money.
I think a little more weight
Noooooooo! I hate adding weight that’s not needed lol. I’ll just change tires 😆
Slippers when they get dirty. Out of the package they are grippers tho.
These companies need to take some notes on tires. They’re too busy comin out with all these different tread patterns. But they need to focus on getting a good rubber compound. Are these companies even testing their products before they release them? Those tires were awful. If j concepts would release their green compound for the 1/24s it would be game over.
I’m gonna send you something, give me a couple weeks. I want you to beat the ish out of it and be honest.
Will do! Can’t wait!!!
Those injoras you showed really suck. I tried to get them to grip using all sorts of tricks. Simple green, wd40, sanding them, and also cut the lugs. Not worth trying
I appreciate the heads up. I kinda figured they wouldn’t do well after opening them up and feeling them lol
🥰🤩💥💯👍👏
A lot of tires look very capable but fail in action. 😢
Totally agree!
Please recommend tires and wheels for my new fms. I just ordered the truck in blue and want good tires and wheels that will grip and fit well.
Just picked up some Dora Dora the Explorer Pin Comps. They grip better than those.