Thanks to this channel I learned so much about gy6 related stuff, here in poor countries where I live, gy6 china bikes are the most affordable. Watching your videos, we can upgrade our little bikes to have more power while being more fuel efficient. There are locals here who also vlog about gy6 but they are not as technical as videos in this channel, they don't know what they are talking about basically.
Hey! So I just got a gy6 ruckus. Why does my carb & intake face the rear wheel but some other ruckus’s face towards the front? Do people just rotate them to change where they sit?
Hey, quick question. Is it possible to run a 1p61qmk gy6 it says it’s a 170cc so what would you recommend. And would I just need a drumb hub and that’s it to add a wider tire?
Maybe you can help. Thinking about either buying one of these Japanese customized scooters or building one if possible. Where can I find website to order all the parts that I need. Not like the one in your video here but more of these lowrider slammed types?
Are your referring to thinking about buying a chuckus (Chinese replica of the GY6 Ruckus) or customizing a Honda Ruckus? I would highly recommend buying a Ruckus on modifying it. We sell all the parts to do so on our website at www.rollingwrenchdenver.com
Okay. Know the model I'm talking about you can find it on TH-cam under the title Japanese lowered scooters. 4 minutes 18 seconds into the video and the one I'm thinking about trying to build or the next one after it.
Start with amorphous or similar bike. Extend swingarm past the rear of the body. Use air ride suspension for swingarm. Lower front forks. Change handlebars. I do not have references for step by step
I have a Benelli Andretti 150. Well it didn't have a rear lug (M14) when bought it, and the rear tire is still wobbly. Even after I put a washer and lug on? Why? Not tight nuff?
whats your recommended torque spec on those wheels w/ the M12 stud? and BTW you need the rear disk brake kit on the 232....Evan @ FLP does a fine job on that, I'm using the Adelin ADP14 Caliper on mine
Shaft arm part you modified... For lowering... I have one scooter.. Now I want fix big rim... This rim 12 inch.. This tyre very2 fix over touching to engine.. How I don't doit..
Hey man. My back tire hub is wobbly. I took the nuts off everything but my exhaust bracket WILL NOT come out of the hub. I cannot get this back tire off due to this stupid bracket. Plz help.
@@RollingWrench false alarm. its when I rock the wheel front to back theres a bit of drivetrain play, not side-side bearing play. but thank you for looking out for me. God Bless
Is ther some one so Nove if 140/60/14i inch ore 150/60/14 one a kymco s8 150cc 2014 model. Orginal is 120/80/14, o e rear weel. Hope some CAn answer me son. Hope to have a. Mezler one it
hi i have a maddog gen 4 and i replaced the engine to a 150 cc but when i return the original rear wheel it is touching the engine near the oil fill is that normal or theres a way to fix this?
I don’t know why, maybe it’s because I’m a master mechanic, But it bothers the shit outta me when people call an engine a motor. A motor is electric en engine typically has some kind of fuel to get things going.
Motor definition: a machine, especially one powered by electricity or internal combustion, that supplies motive power for a vehicle or for some other device with moving parts.
![GY6 Ruckus rear disk brake kit [HOW TO]](http://i.ytimg.com/vi/IJ6OKCritP4/mqdefault.jpg)
![GY6 Ruckus rear disk brake kit [HOW TO]](/img/tr.png)
Thanks to this channel I learned so much about gy6 related stuff, here in poor countries where I live, gy6 china bikes are the most affordable. Watching your videos, we can upgrade our little bikes to have more power while being more fuel efficient. There are locals here who also vlog about gy6 but they are not as technical as videos in this channel, they don't know what they are talking about basically.
Are these bushings available for purchase? I cannot seem to find them on your website.
Hey! So I just got a gy6 ruckus. Why does my carb & intake face the rear wheel but some other ruckus’s face towards the front? Do people just rotate them to change where they sit?
Hey, quick question. Is it possible to run a 1p61qmk gy6 it says it’s a 170cc so what would you recommend. And would I just need a drumb hub and that’s it to add a wider tire?
Hello friend, a question I have a 2003 Honda Metropolitan I want to put a wide rim in the back
Maybe you can help. Thinking about either buying one of these Japanese customized scooters or building one if possible. Where can I find website to order all the parts that I need. Not like the one in your video here but more of these lowrider slammed types?
Are your referring to thinking about buying a chuckus (Chinese replica of the GY6 Ruckus) or customizing a Honda Ruckus? I would highly recommend buying a Ruckus on modifying it. We sell all the parts to do so on our website at www.rollingwrenchdenver.com
Okay. Know the model I'm talking about you can find it on TH-cam under the title Japanese lowered scooters. 4 minutes 18 seconds into the video and the one I'm thinking about trying to build or the next one after it.
Start with amorphous or similar bike. Extend swingarm past the rear of the body. Use air ride suspension for swingarm. Lower front forks. Change handlebars. I do not have references for step by step
I've always been intrigued by the Ruckus. They have such a unique body style. #chinesescooters
I swear that I'm not stalking you.... it seems we watch a ton of the same vids.
Maybe it's me that's stalking you...hehehe 🤣
hello I'm doing a gy6 clone of two cylinders, I would like to talk with you to share information
I have a Benelli Andretti 150. Well it didn't have a rear lug (M14) when bought it, and the rear tire is still wobbly. Even after I put a washer and lug on? Why? Not tight nuff?
whats your recommended torque spec on those wheels w/ the M12 stud? and BTW you need the rear disk brake kit on the 232....Evan @ FLP does a fine job on that, I'm using the Adelin ADP14 Caliper on mine
I do 75 ftlbs. That funny I already have Evans rear brake set up, it’s super nice! I just need to do the install. :-)
Hey I have a ice bear maddog trike bike and it wobbles at 40mph. It only has 45 miles. How can I fix this wobble.
hope you get your sphinkster back in
What did you torque the 4 lug nuts too?
Shaft arm part you modified... For lowering... I have one scooter.. Now I want fix big rim... This rim 12 inch.. This tyre very2 fix over touching to engine.. How I don't doit..
I like know can changes out drive belt to a chain?
lol nope. that's impossible.
Sir do you have a video that on a gy6 scooter that on the backseat is the gas tank and transfer it to the footing of the motorcycle :)
do u have any videos over the overflow drain ?
Can man also extend rear wheel buy another scooters? I have piaggio free and I would like to do extended rear wheel kit.
why have an exposed belt? would getting it wet not result in slipping in the variator?
We don’t ride in the rain. But if it gets wet no biggie. It could slip a bit
Hey man. My back tire hub is wobbly. I took the nuts off everything but my exhaust bracket WILL NOT come out of the hub. I cannot get this back tire off due to this stupid bracket. Plz help.
what are the dimensions of the bushings on the engine case.thanxx
I’m new to the scooter world. Just wondering... what size rim and tire do you have on your white Scooter?
I bought a 24 ruckus today and the rear wheel has slop. Loose nut too?
Take it back!! The first day 😬
@@RollingWrench false alarm. its when I rock the wheel front to back theres a bit of drivetrain play, not side-side bearing play. but thank you for looking out for me. God Bless
Do you sell these wheels on your website? I can’t find any!
How much for the piece of wood on ur website
I have a Riya Ruckus clone with a 150cc motor. Would I use the same Taida bushings as the one you used?
Yes, they should be the exact same
I have a gy6 scooter stretch out now where can I get those nice rims like the one on the Rokus ?
Just internet on google and said "gy6 rims" there nice different many
Bro .my dry clutch on my scoot. Was sliding..haw can i rerove the sliding issue
Dry clutch ? What brand clutch?
What type of rims are these car
Hola.
Ojalá me pudieras decir en donde comprar los amortiguadores delanteros.
Gracias y saludos.
So where can i get these bushings? I cant find them on your website and they arent in your upgrade kit.
Email me, I can invoice you
where did you get the rims
Is ther some one so Nove if 140/60/14i inch ore 150/60/14 one a kymco s8 150cc 2014 model. Orginal is 120/80/14, o e rear weel. Hope some CAn answer me son. Hope to have a. Mezler one it
@@lorentsgaard7391 sorry idk im looking for rims but everwher is sold out
@@telaneyshay9578 mezler have 140/60 /14rear tiers. Then a thi l it will be 110 ore 120/70/14front
@@lorentsgaard7391 u mean rims for a gen 1 maddog?
@@telaneyshay9578 A mean the rear tiers. Back one the bike
I want to buy such a bike where it can be sold
Waarom is er geen geluid bij deze video?
I enjoyed that.
hi i have a maddog gen 4 and i replaced the engine to a 150 cc but when i return the original rear wheel it is touching the engine near the oil fill is that normal or theres a way to fix this?
Not normal, that’s wierd. I would have to see what you mean
the wheel is touching the part wherre the engine where the fan is at .
can i send you a picture of what im saying
Yes please email it. Our contact info in on the about us page
Did you use maddog mount when swapping to 150?? I have maddog gen 4 as well trying to swap to 150
Good video, thanks.
So, the wheel isn't wobbling. It's the worn engine mounts... hmmm
What size is that back tyre?
140-70-13
great vid today ,,, nice shop !
Thank you! Much appreciated 🙏
hello, I follow you with love, I want help with a few sizes, can you help me?
. Where can we supply these wheels?
@@lomate1963 Where can we supply these wheels?
We're do he get his parts from
www.rollingwrenchdenver.com
i need plastics for my tao tao gy6 scooter. message me the site if you can.
ขอคันนี้ได้มั้ยครับ
สวยงาม อยากได้ๆครับ
You should consider retitling this video.
I’m open to suggestions if they make sense.
I don’t know why, maybe it’s because I’m a master mechanic, But it bothers the shit outta me when people call an engine a motor. A motor is electric en engine typically has some kind of fuel to get things going.
Motor definition: a machine, especially one powered by electricity or internal combustion, that supplies motive power for a vehicle or for some other device with moving parts.
Take a shot everytime he mentions bushings.
You’re gonna be trashed ! lol
Bom já sabem como vai ficar, todos iguais so muda a cor eo endereço kkkkkkkk
Y crei que lo hacia mal al hacer ese truco de la hoja de cegeta o cierra de corte jajajaja
Quer ver novos conceitos (Andrei mecadroyd)
That's why I keep my ruckus original,if you put chinese gy6 garbage in it now its garbage like everything they make
Nothing is wrong with stock. It’s just slow in comparison. GY6 is suuuper reliable. It’s the crap harnesses that give them the bad name.
@@RollingWrench ok thanks for the info👍
Lmao.. all that work for a loose axle nut. 😅
Wouldn’t that be something lol
😅
😜