How to clean the throttle body on a 2007 - 2014 Chevrolet Tahoe - EGM DIY

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ต.ค. 2024

ความคิดเห็น • 155

  • @dmosbbq366
    @dmosbbq366 6 ปีที่แล้ว +18

    Also if you're worried about the possibility of using too much cleaner, you can spray the cleaner onto a rag, rub the now cleaner-dampened rag on to all dirty parts, then use a toothbrush, then use clean side of rag with more spray to finish it off.

  • @Presidential_Papi
    @Presidential_Papi 5 ปีที่แล้ว +7

    Thank you for the video; a bit apprehensive at first. However, I did lite and few strays with just a cloth to wipe up black residue. 10m later engine light turned off and idle is back on point. Salute! From a novice viewer.

  • @kelvinhenderson-br4l320
    @kelvinhenderson-br4l320 4 ปีที่แล้ว +15

    Nice video. I use Seafoam to clean my 08 yukon denali xl. The only difference is I have someone lightly put there foot on the pedal and let the cars natural operation open the throttle body while I spray the cleaner in. With this method I don't have to reset anything because the car is working on its own. I then let the truck rest for about 30 minutes and then start it up again. you will see that big black cloud of smoke come out the tail pipe and bamm. It is running like new. I rarely have any issues with my truck and I have 188k miles on her.

    • @themadmattb
      @themadmattb ปีที่แล้ว

      I’m sorry to tell you, but Seafoam spray does not clean your throttle body. This is a different required maintenance.

    • @bronx1993
      @bronx1993 ปีที่แล้ว +1

      @@themadmattb I just came from O'Reilly's Auto store and they told me to use Seafoam to clean the throttle body. I'm glad you commented. Thanks

    • @ARJ11569
      @ARJ11569 8 หลายเดือนก่อน

      I wish I would’ve read the comments before buying the TBC. I was thinking about using seafoam too so I could put the leftovers in the gas tank.

  • @danielwong8665
    @danielwong8665 5 ปีที่แล้ว +11

    Easy solution, just remove the throttle body and do the cleaning outside the vehicle. Definitely recommend cleaning the MAF sensor at the same time as well

    • @richardmcbride29
      @richardmcbride29 3 ปีที่แล้ว +4

      Make sure you use MAF sensor cleaner not throttle body cleaner

  • @markjones957
    @markjones957 4 ปีที่แล้ว +9

    Definitely a very helpful video thanks man. I ended up just taking the whole throttle off for a thorough clean

  • @ICUP920
    @ICUP920 7 ปีที่แล้ว +9

    Great video. I did this in 15 minutes and saved myself a dealership trip. Thank you!

    • @EducatedGreaseMonkey
      @EducatedGreaseMonkey  7 ปีที่แล้ว

      Glad I could help. Thank you for watching. Share it with those you think it would help.

    • @juanrobertoruiz1309
      @juanrobertoruiz1309 2 ปีที่แล้ว

      Does opening the butterfly require to reset the tps

  • @hafashsaleem5164
    @hafashsaleem5164 6 ปีที่แล้ว +6

    The best way to clean the throttle out side : thank you

  • @fbenavidez53
    @fbenavidez53 4 ปีที่แล้ว +41

    Take off the throttle boby when ur cleaning it save ur engine 2 nuts and 2 bolt if u ask me this is the wrong way to clean ur throttle boby

    • @cnrails
      @cnrails 2 ปีที่แล้ว +3

      I agree, another 90 seconds time for 2 bolts, 2 nuts, and the electrical plug and the TB is completely removed eliminating any chances of hydro locking the engine. Leaving the TB on is lazy.

    • @budanah-Bh
      @budanah-Bh ปีที่แล้ว +1

      And it’s needs a program if you take the throttle body out

    • @jaidenlewison6953
      @jaidenlewison6953 ปีที่แล้ว +2

      @@budanah-Bh it need a reprogram either way lol

    • @mack606
      @mack606 ปีที่แล้ว +2

      @@budanah-Bhjust disconnect the negative on the battery and when u done go for a long drive so the computer can get use to it and you’re fine just did mine this past weekend no issues

    • @guymaninu
      @guymaninu 26 วันที่ผ่านมา +1

      Cool. Between the guy making this video and the logic behind your comment, I believe I know what to do. If I take off the throttle body I don’t have to worry about seizing my engine. Right? Thanks for the advice, it’s logic. 🇺🇸🙏🏽

  • @toddh6234
    @toddh6234 7 ปีที่แล้ว +10

    Consider disconnecting the power even if you don't remove the throttle body from its mount. These electronic types sometimes to an auto cycle. If that plate slams shut on your finger its powerful enough to take the tip off. You may not be able to remove your finger with the reduction gears engaged.

    • @TheRancher03
      @TheRancher03 4 ปีที่แล้ว +1

      Use screwdriver handle (or similar) to hold throttle body open while cleaning.

  • @stephencasanova4382
    @stephencasanova4382 6 ปีที่แล้ว +7

    I did everything as u did in the video, had NO problems with starting the truck up. The RPM were high at first but then it idled down. The only problem I'm having is, when it's in park r in neutral and I tap the gas pedal, the RPM will jump to 3000 r so for little while and then slowly idle back to about 500 rpms. Also, i noticed that right before coming to a complete stop, it feels like the truck lounges forward. And as soon as I let go of the brake the truck starts moving forward normally as it should, but in no time at all I'm in second gear and doing 15-25mph (without touching the gas pedal). Any ideas on what's causing this.
    Great video........short, simple and straight-forward.

    • @edwardofraire5385
      @edwardofraire5385 6 ปีที่แล้ว +3

      I have the same problem

    • @tnfloose9023
      @tnfloose9023 6 ปีที่แล้ว

      Hey I'm having the same issue after cleaning yesterday. Did yours relearn itself?

    • @canes7473
      @canes7473 6 ปีที่แล้ว +1

      Stephen Casanova that’s a differential issue. Rear differential. I had the same issue. 2012 GMC Yukon. I replaced all the u joints and bought a new nickel plated yoke. Flushed the rear differential fluid, tranny fluid and it shifts like a dream. There should be a recall for this issue, but GM hasn’t done that yet. $350.00 out of pocket will give you sound mind.

    • @ED-us2li
      @ED-us2li 6 ปีที่แล้ว

      Stephen Casanova Did you find out what was causing the problem? Mine has similar issues.

    • @seanblandford2087
      @seanblandford2087 5 ปีที่แล้ว +1

      Stephen Casanova yeah go get a idle reset dumb fuck

  • @YaBoy26
    @YaBoy26 3 ปีที่แล้ว +9

    I wish I had watched the other videos on this topic first. I manually opened the vane and now my throttle position sensor is jacked.

  • @ltr310
    @ltr310 6 ปีที่แล้ว +24

    Ok vid, but as others posted, don't open the throttle manually, these newer style Chevy's use electronically controlled throttle bodies and opening it manually will throw it off calibration.

    • @dougsanders6034
      @dougsanders6034 3 ปีที่แล้ว +3

      It will definitely throw it out of calibration and the dealer only charges $138. Learned the hard way.

    • @JoeyDaBull
      @JoeyDaBull ปีที่แล้ว

      @@dougsanders6034 what were ur symptoms?

    • @dougsanders6034
      @dougsanders6034 ปีที่แล้ว

      @@JoeyDaBull the throttle position on my 2008 , 4.3 v6 being out of calibration caused it to over Rev. And it idled at around 2000 rpm and when I would turn it off it would sometimes diesel or want to keep running. What are your symptoms?

  • @MrJamesgrate
    @MrJamesgrate 6 ปีที่แล้ว +42

    There are too many scenarios wrong with this video, 1) You should have removed the throttle body from the engine, then spray clean it, you don't want to introduce foreign chemicals to the engine. 2) The butter fly is computer controlled, the BCM will still think the (TB) clog remains, until it re-learns the Idle on a cleaned throttle body, which can take driving your vehicle over 150 miles, unless if you have an active online scanner to make the computer adjustments. According to your video, If someone follows your instructions, then start up their vehicle, the first thing that will happen is the (RPM"s) will shoot up to 3000, once they press the gas. This is a quick way to clean your (TB), but it's not a recommended way to do it, it will cause more problems for you!!!

    • @joepruneda2263
      @joepruneda2263 4 ปีที่แล้ว +5

      😭 my rpms are high. 2500 3000 😞

    • @dollarhoang
      @dollarhoang 4 ปีที่แล้ว +2

      no mames James, the video its fine, and nothing will be damage inside for a little bit of "external chemicals" , Master GM Mechanic

    • @35TheDarkknight
      @35TheDarkknight 4 ปีที่แล้ว +2

      @@joepruneda2263
      My rpm when high too😱.
      Just did a few minutes ago so im looking for answers

    • @duringreyowl2588
      @duringreyowl2588 4 ปีที่แล้ว +1

      RPMs are at 3000 at idle. A lot of people need help with this. Any expert tips??

    • @MrJamesgrate
      @MrJamesgrate 4 ปีที่แล้ว +5

      @Durin Greyowl, Only what I described in my comment, there are two ways to resolved your problem, 1) if you have an active scan tool that allows you to make computer adjustments to the (BCM), You'll have to make the BCM re-learn it's idle after cleaning the throttle body, or 2) eventually after driving for 100 miles or so in stop and go traffic, the BCM computer will eventually re-learn that the throttle body isn't congested any longer, and start making the proper adjustments to gas and air ratio. I AM NOT A MECHANIC, but I have personally experienced and dealt with this issue and resolved it myself. I don't have a scan tool so what I did was found a mechanic that charged me $35.00 just to make my Tahoe re-learn it's Idle. Hope this helps you to fix your problem!!!!!

  • @thekrazykuntreeescratcher
    @thekrazykuntreeescratcher 5 ปีที่แล้ว +1

    I think it's great that you responded to the questions everybody had
    Nice video and insight

    • @EducatedGreaseMonkey
      @EducatedGreaseMonkey  5 ปีที่แล้ว +1

      its hard to write back to everybody. I do try and help as much as I can.

    • @efrengarcia9506
      @efrengarcia9506 5 ปีที่แล้ว

      So is there no need to have to relearn the idle ...like reset it with a scanner

    • @duringreyowl2588
      @duringreyowl2588 4 ปีที่แล้ว +1

      He's not responding to the crucial questions

    • @lHasRage
      @lHasRage 3 ปีที่แล้ว

      @@efrengarcia9506 You can do a re-learn. Idle 3 minutes. Turn off. Do that 3 times. Also, if that doesn't do it, take your vehicle on the highway. Throttle up and down above 44 mph. For many miles. I have heard a minimum of 50 miles. You can try those steps a couple times. If it still fails, repair shop time.

  • @georgeangel4906
    @georgeangel4906 3 ปีที่แล้ว +1

    Dam mechanic charged me 115$ for something so simple.Thx for posting.

  • @cyberbullets5974
    @cyberbullets5974 6 ปีที่แล้ว +27

    I used my wifes tooth brush😁

    • @TAOMMANN
      @TAOMMANN 3 ปีที่แล้ว +1

      I know it’s late but god damn that made me laugh

  • @notorious.legend
    @notorious.legend 6 ปีที่แล้ว +7

    Hey bro, great video on cleaning throttle body, however i was tild by a mechanic that if you move that valve with your finger or even after you clean throttle body it dis-programs it self... im ny case i got a service traction/reduced engine power/service stabilitrak on my dashboard... i hooked it up to a scanner and got the P2176 code, please help!

  • @torkrench
    @torkrench 5 ปีที่แล้ว +8

    Hydro lock it? Lol the stuff evaps in seconds! No worries on hydroing with tb spray

    • @EducatedGreaseMonkey
      @EducatedGreaseMonkey  5 ปีที่แล้ว +1

      I've seen techs lock up engines by emptying a bottle in there.

    • @torkrench
      @torkrench 5 ปีที่แล้ว +1

      Thatd take some quick doin! Stuff usually dries quicker than i can scrub:)

    • @Carlzday
      @Carlzday 5 ปีที่แล้ว +1

      RIGHT? a friend of mine tried to tell me that's why mine wouldn't start ...and he's a licenced mechanic... maybe with seafoam and not idling high enough then shutting her down before it burns off, but not throttle body cleaner, unless you pop the can and dump it in

    • @daddysoulmanrich
      @daddysoulmanrich 4 ปีที่แล้ว

      Exactly I have to do this once a year. You can spray the crap out of it. Zero problems

  • @Mcdashiznit
    @Mcdashiznit 7 ปีที่แล้ว +4

    Nice video I use a wood under seat then forward the seat onto gas pedal to open throttle ....but then again that's me

  • @alfredog6620
    @alfredog6620 4 ปีที่แล้ว +5

    Dude, you never clean that throttle body like that. You need to mention to these folks that this is not the recommendation. You also need to do an Idle re-learn.

  • @Fummins139
    @Fummins139 4 ปีที่แล้ว

    Nice video Carlos, what were the trucks symptoms?
    My 2013 5.3 1500 Silverado idles high at start up and when i come to a rolling stop.
    Died on me twice at stop sign too. Is this a symptom of a dirty TB?
    Thanks, Marco

  • @fer19822006
    @fer19822006 7 ปีที่แล้ว +10

    Hey Carlos, nice video there.. However I have a question, in your video you moved the butterfly with your hand but by doing that, does the truck will have higher revs or malfunction or does it has to relearn the throttle position again?? I have seen in other videos the guys saying not to touch the butterfly to avoid moving it... I hope you can teach me into this. Thanks

    • @EducatedGreaseMonkey
      @EducatedGreaseMonkey  7 ปีที่แล้ว +8

      I wouldn't go as far as saying don't touch the butterfly. They are known to go bad (they way you mentioned) from time to time but I worked at a dealership and I would do this service about 4 to 5 times a day on similar models. In a year, I might see one go bad. However, if you don't clean the throttle body there is a good chance you will experience low idle and drivability concerns.
      If you do not want to risk it. Then, you could try having someone push the accelerator pedal with the ignition on, engine off. I'm not sure if that will get the butterfly to move though because ultimately it's controlled by the ECM.

    • @jburk21
      @jburk21 6 ปีที่แล้ว

      You can have someone press the gas pedal with key on, ignition off. That's what I do, my tahoe insists on this service every few months.

    • @mr.Ureshi
      @mr.Ureshi 5 ปีที่แล้ว

      Para evitar la desconfiguración, es mejor desconectar el arnés antes de limpiarlo.

  • @erickcontreras637
    @erickcontreras637 3 ปีที่แล้ว +1

    Hi, I just did It the same way, before watching this video, and now. I have high idling, I did the
    3 minutes on 1 minute off 3 minutes on again,
    The driving around 40 miles and nothing
    Any suggestions?? Thanks

    • @hailtwinmusclewrkout
      @hailtwinmusclewrkout 2 หลายเดือนก่อน

      Drive another 40-50miles, at 40-45mph. That fixed it for me

  • @efrainSRT
    @efrainSRT ปีที่แล้ว

    Is this most likely the cause of my rough idle? Ive used a few fuel system cleaners, changed sparked plugs and even had my worn engine mount’s changed, hoping this works

    • @rubydoobie9717
      @rubydoobie9717 ปีที่แล้ว

      Did it work?

    • @efrainSRT
      @efrainSRT ปีที่แล้ว

      @@rubydoobie9717 i never tried it, i just bought some fuel system cleaner and used it a few times every 2 fill ups and helped my problem

  • @justfishing6686
    @justfishing6686 ปีที่แล้ว

    Can this help with “engine power reduced” to clean it out?

  • @lovesrain8042
    @lovesrain8042 ปีที่แล้ว

    What about the "Re-learn" ? Also, are you NOT supposed to touch the butterfly?

  • @skippyjl1
    @skippyjl1 5 ปีที่แล้ว +2

    Do you like SEA FOAN, for cleaning Carbon, build up ?
    Awesome videos 👍🏻👌🏼🍀✌🏻 Good job 👊🏻

    • @kelvinhenderson-br4l320
      @kelvinhenderson-br4l320 4 ปีที่แล้ว

      with that seafoam you dont run the risk of over spray. It melts all that gunk away with little if any scrubbing. Nice suggestion. And it get real deep in the throttle body.

  • @cammims7645
    @cammims7645 7 ปีที่แล้ว +2

    I have a 07 Yukon Denali XL Is cleaning it really going fix this Engine Power Reduced Problem ? Or im better off buyinh a nneew Throtttle Body from autoone Shits getting outta hand cant go no fatser then 30 mph smh

    • @EducatedGreaseMonkey
      @EducatedGreaseMonkey  7 ปีที่แล้ว +3

      I never said the cleaning would fix a reduced engine power code. This is just maintenance. If you have a Reduced Engine Power situation I would get the car scanned to know where the problem is coming from.

    • @dougiefresh730
      @dougiefresh730 6 ปีที่แล้ว +2

      Hey I realize this is a year old but you need a new throttle position sensor. They about 40 bucks at most auto parts stores. Easy to change too.

  • @ghostlyr1601
    @ghostlyr1601 4 ปีที่แล้ว +1

    I've been told not to clean the throttle body unless I have a scanner to reprogram it as the electrical one will make it either drop the rpms or have them raise up too much, any thruth to this?

  • @davet1608
    @davet1608 8 ปีที่แล้ว +1

    14 chevy 1500 25,000 on odometer v6 was told by dealer I needed to have my throttle body and fuel injector cleaned. confident in doing what you've shown. what are your thoughts on fuel injectors?

    • @EducatedGreaseMonkey
      @EducatedGreaseMonkey  8 ปีที่แล้ว +3

      Most cars dont require you to ever flush the injectors. If you do not have a reason to flush them. Leave them alone.

    • @EducatedGreaseMonkey
      @EducatedGreaseMonkey  7 ปีที่แล้ว +2

      Cleaning it isn't going to fix a problem with the sensors. You have to replace the parts if they have been diagnosed to be replaced.

  • @mariabarahona5740
    @mariabarahona5740 3 ปีที่แล้ว

    thank you for your help

  • @jamalwashington2722
    @jamalwashington2722 6 ปีที่แล้ว +1

    Hey great video can I perform this on a 2008 gmc yukon.

  • @Refertech404
    @Refertech404 6 ปีที่แล้ว +1

    I took my 2014 chevy to get an oil change an they suggested to get the throttle body service estimated cost $120 and also they have to programmed it....I mean this is simple enough I think I can do, but I don't know about programming it

  • @edmonddelagarza4029
    @edmonddelagarza4029 2 ปีที่แล้ว +1

    Great video. Great tips 👍 Keep up that good work!

  • @DownToFish
    @DownToFish 6 ปีที่แล้ว

    I have a 2012 Yukon xl that has a hard time starting cold. usually if I don't use it in a day or so. once I get it started it won't do it for the rest of the day. it also has a hard time starting after I pump gas. what I have to do is hit the gas and eventually it starts with a could of smoke coming from the tail pipe.
    Question; will doing this help me or is my symptoms something else? Thanks in advance!

  • @tnfloose9023
    @tnfloose9023 6 ปีที่แล้ว +2

    You might as well take the throttle body off it's only 4 bolts n you can get it perfectly clean.

  • @dennisharvey8435
    @dennisharvey8435 6 ปีที่แล้ว

    Hey brother I can’t find my iac valve on a 09 silverado. Not on the throttle body. Can you tell me where it’s located and maybe a cleaning video. Can’t find one anywhere

  • @napalmdaddy
    @napalmdaddy 3 ปีที่แล้ว +2

    I cleaned as described in video but now I’m idle until at 3k rpm. Anyone know how to fix?

    • @MrJbxl88
      @MrJbxl88 3 ปีที่แล้ว

      Your truck will reset after driving a certain number of miles. You have to open using the gas pedal only not by hand.

  • @EF_DadLeftMe
    @EF_DadLeftMe 3 ปีที่แล้ว

    Mine idles at 500 yours was higher is that normal?

  • @reacter25
    @reacter25 6 ปีที่แล้ว +2

    After I cleaned mine when I put in drive it reved by itself to 1000rpm without me touching the gas pedal does it eventually correct itself or relearn it self I also disconnected the positive battery cable

    • @davidthaabagchaser4256
      @davidthaabagchaser4256 4 ปีที่แล้ว

      Mine use to do half of 1 now it’s at 2

    • @thomasdoig
      @thomasdoig ปีที่แล้ว

      Take off the negative battery terminal

  • @absolutely4151
    @absolutely4151 6 ปีที่แล้ว

    Ok Hopefully I can get a response? Ok so I have a 2010 Tahoe Z71 5.3 vortex flex fuel that I bought a month ago I started to realize that the idle drops when I'm stopped in a drive thru or at a stop light it goes from normal idle to a few Rpms lower and then you can kinda feel a little bit if a stutter bad it never stalls or dies and as soon as I push on the acceleration it's fine and it never happens while driving also I have no check engine light it just does starts doing it randomly when at idle do you think that it's a dirty throttle body and just a simple as a clean? Please help I thank you for your time in advance.

    • @miacoleman2927
      @miacoleman2927 4 ปีที่แล้ว +1

      Did you figure this out? Same issue here

    • @absolutely4151
      @absolutely4151 4 ปีที่แล้ว

      @@miacoleman2927 The things I replaced were the air filter, battery, spark plugs, I installed a oil catch can and had a fuel treatment done at the time of the oil change. After replacing the items listed above my truck runs perfectly, never had the problem since. And it runs 10 times stronger and smoother then it did when I first bought it. I also get about 5 to 10 better MPG on premium chevron gas. Hope that helps. It only cost me $200 for everything including the oil change and the only thing they didn't do for me was install the oil catch can, but anyone that's even kinda Mechanically incline can put it in about 5 mins.

  • @1mantisco
    @1mantisco 6 ปีที่แล้ว +1

    I've always done this with the vehicle running

  • @albertsilva4057
    @albertsilva4057 4 ปีที่แล้ว

    What happens when you clean the tb, then the truck accelerates crazy non stop?

  • @victorrosales5401
    @victorrosales5401 2 ปีที่แล้ว

    Ended up with high idle how to fix ?

  • @frankduran6062
    @frankduran6062 3 ปีที่แล้ว +2

    I thought it was just better to take the throttle body out and clean it let me know I'm trying to do this to my Silverado 12

    • @dougsanders6034
      @dougsanders6034 3 ปีที่แล้ว

      You would be better off to take it off and be shure not to move the throttle Plate while cleaning it, otherwise you may have to recalibrate the idle speed. recalibrated.

  • @hitmanm818
    @hitmanm818 6 ปีที่แล้ว

    Will this help my car reduced power message

  • @pattonmaning8781
    @pattonmaning8781 3 ปีที่แล้ว

    That's why u take the throttle off bro
    An never move that butterfly by hand
    U will throw the calibration off big time
    These new trucks have sensores

  • @boobietrapp07
    @boobietrapp07 7 ปีที่แล้ว +2

    Would you recommend I take the throttle body completely off so I don't risk spraying too much cleaner in the intake?

    • @EducatedGreaseMonkey
      @EducatedGreaseMonkey  7 ปีที่แล้ว +3

      I wouldn't unless you plan on replacing the throttle body gasket. Those gaskets are so thin that just removing the throttle body could break them. Just spray it in there. It helps clean the manifold as well. Just keep an eye on how much. in other words if you used half of a bottle its way to much. Just spray a little and brush, then spray a little more and wipe clean.

  • @Topherautomechanic1424
    @Topherautomechanic1424 3 ปีที่แล้ว

    I also did this before but the car is going 3000Rpm , why?

    • @richardmcbride29
      @richardmcbride29 3 ปีที่แล้ว +1

      When you manually open the plate you run the risk of messing up the calibration

  • @Topherautomechanic1424
    @Topherautomechanic1424 3 ปีที่แล้ว

    Its idle is 3000rpm and not going down after i clean and need to reset throttle

  • @manuellermajr509
    @manuellermajr509 4 ปีที่แล้ว +1

    I put a bottle and when I turned on my truck it accelerated by it self!!!!!?

  • @wilcruz87
    @wilcruz87 4 ปีที่แล้ว

    Alguien me puede ayudar. Quisiera saber si solo al limpiarlo se le borrará la luz del check engien

  • @lovellrodriguez8567
    @lovellrodriguez8567 2 ปีที่แล้ว

    hydro lock huh? if it was pouring rain locked the engine ? it drys real fast and wont lock the engine and this is not way too clean i

  • @rubenbustamante8283
    @rubenbustamante8283 4 ปีที่แล้ว

    Where does the idle air control valve go?

  • @mrhighway
    @mrhighway 6 ปีที่แล้ว

    What kind of exhaust is on the Tahoe sound good?

  • @jokertt14
    @jokertt14 ปีที่แล้ว +1

    Dont be lazy take the throttle body off 10mm -4 bolts .. easy ...

  • @يوتيوبالعرب-ع1ن
    @يوتيوبالعرب-ع1ن 4 ปีที่แล้ว

    Good job bro 😗

  • @youseefbarca2125
    @youseefbarca2125 2 ปีที่แล้ว

    🤣🤣🤣🤣 nice work 😂😂😂

  • @taso072008
    @taso072008 6 ปีที่แล้ว +1

    why didn't you take it off then clean it, you can't lock you engine up doing that

  • @Life714life
    @Life714life 5 ปีที่แล้ว +4

    I believe you had to disconnect the battery first, that is a sensor that you cleaning
    that’s a big No No

    • @wasian4
      @wasian4 4 ปีที่แล้ว +1

      Cars off, no data is being relayed. Why would you think this is an issue?

    • @isaactaylor1833
      @isaactaylor1833 4 ปีที่แล้ว

      Sam Brumley keyboard idiots. They don’t know what they’re saying lmao. Disconnect the battery before cleaning the TB? Hahahaha idiot

  • @bc24txn
    @bc24txn 7 หลายเดือนก่อน

    I would not spray directly in it.

  • @adriannayugovich5033
    @adriannayugovich5033 6 ปีที่แล้ว

    Having an issue with my 07 suburban. On the highway abs light came on and check engine light aas flashing. Pulled off high way, misfire on 7. Changed coils, plugs, wires, oil, air filter, cleaned MAS. Turned back on abs came on "service stabilitrak& service traction control. Now reads misfire on 3. Wth do I do now? I have heard grounding wire, brake sensor thing, and abs spees sensors can be the issue, from an online search. Do you have any advice?

  • @lpaz2026
    @lpaz2026 5 ปีที่แล้ว +4

    U never clean ur throttle body that way always remove then clean

  • @skippyjl1
    @skippyjl1 5 ปีที่แล้ว

    What do we do if : LOCK UP ? 🤔🤕👍🏻

    • @josevaldes6748
      @josevaldes6748 3 ปีที่แล้ว

      Get a new car lmao

    • @aaronrodden8121
      @aaronrodden8121 6 หลายเดือนก่อน

      You can take all the coil packs off and all the spark plugs then turn the car over! If your lucky, it will spray all that crap out through the plug openings with the super high compression not under load!

  • @24AVasquez
    @24AVasquez 2 ปีที่แล้ว

    I should’ve read the comments before following the steps on the video 🤦‍♂️…My RPMs are all over the place now ..sigh

  • @kingkotkot2341
    @kingkotkot2341 7 หลายเดือนก่อน

    Just use tech2 clone to rest the throttle

  • @myself5530
    @myself5530 ปีที่แล้ว

    Please do not do this! I listened and did exactly as he said. My car reved up and stayed at 3rpms. Now i have high rpms even when idling my vehicle even kept going without throttling it so we went and got new throttle body same thing now in shop waiting to see what is going on.

  • @giannaamadio5440
    @giannaamadio5440 7 ปีที่แล้ว +2

    Wat if the rpm continues to increase

    • @giannaamadio5440
      @giannaamadio5440 7 ปีที่แล้ว +1

      When I idle the rpms are at 1000 as soon as I touch gas it goes to 3000 until I put it into gear. Will it correct itself after awhile or is that a sign to have checked

    • @EducatedGreaseMonkey
      @EducatedGreaseMonkey  7 ปีที่แล้ว

      The engine is expected to act weird at first but after a few accelerations and a few minutes of idling everything should go back to normal. If it does anything that it didn't do before. then there is a problem.

    • @imarealist6275
      @imarealist6275 7 ปีที่แล้ว +4

      Gianna Amadio: You're not supposed to open your throttle body manually. It that's why your idle is high. It will eventually relearn itself. Next time turn the key into the on position and have a friend floor the gas without it running obviously. And you will not hydolock your engine using carb/tb cleaner. It will evaporate as you're cleaning.

    • @frankmurray9353
      @frankmurray9353 6 ปีที่แล้ว

      @@imarealist6275 you in fact can and will hydro lock your engine using throttle body cleaner if you use far too much which I have seen first hand myself. I watched someone damn near do it and had to step in and shove a small towel into the throttle body to soak up as much as i could because he was about to try to start the engine and that would have been very bad. So your comment is false.

  • @toniocavalari6936
    @toniocavalari6936 ปีที่แล้ว

    Hell with the hydrolocK Bro '
    I'll take the throttle body off,
    I'm not taking any chances 😖😭

  • @chrisp8395
    @chrisp8395 2 ปีที่แล้ว

    Just remove the throttle body and clean it better ,4 little bolts🤗🤷‍♂️

  • @dexterallen2672
    @dexterallen2672 8 หลายเดือนก่อน

    Dont spray to much man proceeds and sprays alot. Naw but you can always take the trottle body off thats what i do

  • @bears893
    @bears893 2 ปีที่แล้ว

    Better off taking it apart.

  • @roltyd22
    @roltyd22 2 ปีที่แล้ว

    After reading these comments fk it im not touching the tb

    • @nateflores3395
      @nateflores3395 2 ปีที่แล้ว +1

      right lol ive got a new one on the way and idk wtf to do now....

  • @naveenJaanu
    @naveenJaanu 5 ปีที่แล้ว

    This ir wrong method should be remove out throttlebody assmbly and clean

  • @greenautotech
    @greenautotech 6 ปีที่แล้ว

    Gadgetmangroove.com is where i found the best performance overall for my vehicle and it starts at the throttle body! Check it out bro 😃