ARROWS RC MARLIN GEAR UPGRADE by Fat Guy Flies RC
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2023
- Well here I am doing the upgrade to the gear on the Arrows RC Marlin. This simple mod will result in the Arrows Marlin having great upgraded suspension gear. The suspension gear is from the FMS Futura which you can also buy from HobbyZone. All these things can be purchased at Hobbyzone!
Below is a list of planes HobbyZone has sponsored me with. If you want one of these use the corresponding purchase link and use code FGFRC at checkout and save $10 on the price! My thanks to you for watching!
1300mm Edge540=shrsl.com/4efzc
1300mm Bigfoot =shrsl.com/4cuza
50mm Avanti PNP w/Vector=shrsl.com/4cuzc
50mm L39 PNP w/Vector=shrsl.com/4cuze
50mm T33 PNP w/ Vector=shrsl.com/4cuzf
50mm Bae Hawk PNP w/ Vector=shrsl.com/4cuzp
64mm F-15 PNP=shrsl.com/4cuzo
50mm Viper PNP w/ Vector=shrsl.com/4cuzv
1200mm Trekker RTF=shrsl.com/4cuzw
64mm Marlin PNP=shrsl.com/4cuzm
64mm MiG-29 PNP=shrsl.com/4cuzz
600mm Hawk Eyes RTF=shrsl.com/4cv02
64mm F-86 PNP w/ Vector=shrsl.com/4cv04
HUSKY ULTIMATE PNP=shrsl.com/4cv06
FMS FUTURA 64=shrsl.com/4cv08
FMS AVANTI S 70MM=shrsl.com/4cv0a
FMS RAFALE 80MM=shrsl.com/4cv0c
FMS F-86 80MM=shrsl.com/4cv0d
FMS VIPER 15YEAR ANN 70MM=shrsl.com/4cv0g
SZD 54 POWER GLIDER=shrsl.com/4cv0i
ARROWS MUSTANG P-51 PNP=shrsl.com/4cv0k
ARROWS T-28 TROJAN PNP=shrsl.com/4cv0m
ARROWS CORSAIR PNP=shrsl.com/4cv0o
ARROWS PRODIGY RTF=shrsl.com/4cw5a
AROOWS BIGFOOT RTF=shrsl.com/4cw58
FMS PC-21 PILATUS PNP =shrsl.com/4dezy
FOR THE GEAR GO HERE:shareasale.com/r.cfm?b=239481...
THEN find the FMS Futura 64mm and go to parts. You need the nose and main gear only nothing else needed.
PLANE SPECS:
Wingspan: 900mm (35.43in)
Length: 995mm (39.17in)
CG (Center of Gravity): 72-75mm from leading edge
Power System: 3150kV - 2840 size
Electronic Speed Control: 40A
Propeller / EDF: EDF 64mm 11 blade
Servos: 9 gram servo x 7, 9 gram 54 degree servo x 1
Landing Gear: Robust fixed
Required Battery: 4S 2200-3300mAh 35C XT60 Connector
Required Radio: 6 Channel transmitter and receiver required
Ailerons: Yes, separate servo for each
Elevator: Yes
Rudder: Yes
Flaps: Yes
Lights: No
Hinge Type: Fabric
Material: EPO Foam
Skill Level: Beginner to intermediate
Build Time: 10 minutes
Recommended Environment: Park, School, or AMA field
Want a great lipo for this plane? go here: rcbattery.com/batteries/plane...
Thanks for watching and staying up to date with Fat Guy Flies RC!
You do that by hitting that thumbs up button and subscribing to my channel! Also hit that little bell and you will be notified every time I upload a video!
God bless!! - แนวปฏิบัติและการใช้ชีวิต
A very simple yet effective mod!
Nice upgrade good info😀✈👍
Thanks so much!
Great tip. Thanks. I will do it. Kinda hard to hear you in the shop. Thanks.
Noted! It is a constant struggle between doing a chore and forgetting that I am teaching...lol
I took the landing gear off my Marlin and hand launch - BUT now these are available I have gone and got a set of these and will try them on it - thanks for the info ..
Most welcome. i just did an unboxing and build of the Arrows T-28 loading it up in a few.
@@FatGuyFliesRC I really liked my Arrows T28 after I finished smashing it to bits on the maiden - really fun to fly - but sold it on so I could get the FMS 1400 T28.. I have had the Carbon Z T28 on order here in the UK for 4 months and run out of Patience with E-fight so cancelled my order and picked up the Xfly Alphjet.. LOL talk about different birds ...
@@FlankerTanker That alpha takes a while to land but great gear!
On a side note - this "MOD" also works on the FMS Rafale (64mm EDF) version - I got these for my Marlin, but ended up putting them on the FMS Rafale, now I have to get another set for the marlin LOL...
Lol I originally wre going to put them on my rafale 64 but love to hand launch her so I put on the marlin instead. See great minds think alike.