Where did you get the SP level input cable that goes into the amp? I got the same Kenwood amp but it didn't come with the cable in the box. Great vid btw
I had a so called profesional upgrade my tacomas audio system a few years ago. When it stopped working I took it apart to check it out and what a mess! It looked like a rookie install, a ton of mistakes and poor quality work. So I decided to fix it myself, I ripped it all out and started over, your video provided a lot of useful information and really saved me a lot of time and frustration with this project. Great video, You have earned a new subscriber.
Hey provo beast audio, or whoever is the man in the videos! I got my avionics degree last year and learned all about wiring and sine waves. It got me into a new hobby of car audio. I used one where you worked on a Tahoe to install my system. Now I watch your videos for entertainment
Hey buddy, It's Chris (the man behind the curtain). I'm a one man show, so I appreciate the good words of encouragement. Glad you like the content! Cheers!
Avionics? Where you at if you don't mind me asking? I'm at Ft Novosel working avionics on the rotary wing fleet (don't want to say exact field). Avionics isn't a huge community. I was watching these vids because I just bought a Tacoma and wanted ideas and tips on how to run clean installs because the stock audio is.... subpar at best.
I wish these fancy factory radios came with RCA outputs already 🤦🏻 This was really helpful, as soon as they drop a 4x 6.5 woofer box for the 24 I'll be revisiting this 👌
How crazy I just bought this amp and need more info on a 5 channel. im amazed to see i dont need to use the rca cables. this video really helped me understand the install also bought the plate for it to... thanks again
Excellent video! I followed it to the T and love this setup. The tweeters that come with the 6x9’s are bigger now but I was able to trim and fit. I highly recommend the bass knob. Thanks
To anyone who has used this amp and connected it this way - is your volume loud? My music sounds clear but I kinda expected a little higher volume, but with the amp dialed in Immy speakers and sub are not that loud. I installed this amp and a 10” jl in a stealthbox and infinity primus 6x9s in the front and infinity reference speakers in the rear.
I installed everything just like in this video but only difference is that I bought the harness for the 2016-2020 harness for my 2018 Tacoma, but the radio won’t turn on! What’s happening can someone explain me please!
Man I have the tyo1 harness and the ap4-ty13 and im throughly lost i cant make this work I have the jbl premium junk and I thought I had the correct amppro and harness but I can't make sense out of it
You don't, i mean you could use the bass adjustment on the radio. Outside of that, there is no easy adjustment without the knob. Kenwood sells it for $35 on amazon.
any chance you have a video or diagram explaining how to modify the harness for the Tacoma 2016 System?, I bought recommended links so I have the same componends w/ the red wolf harness 2016
We try and apply techniques for anyone using any type of amp. Yes, the Kenwood can turn itself on, however, not ever viewer will use that exact amp.@@bbogue4
Great video and coincidentally it's the same stock audio system as my tacoma. I'm currently trying to fit a small 5 channel amp in the empty space behind the radio so I don't have to run the wires back and forth. I'm going to place the sub under the passenger seat in a custom enclosure
I want to use Pac APH-TY04 Speaker Connection Harness to bypass my factory JBL amp (2017 Tacoma). Once I connect the 10 pin and 12 pin from the harness to factory harness what wires do I connect to my amp? What do I do with the unuse wires coming from the harness?
Hello question so if I wanted to to a different sub and box with this setup to sit on the seat like a 12” with a decent size box would the amp know not to blow out the speakers in the doors when I push it hard? That’s all I’m a little confused about
Hello. How did the sound in rear speaker sound? In my Toyota the rear sound from headunit its wery low and Almost no bass. And amplyfy that weak signal just get louder ?,,, but still no bass ? Right. ??
Have a 2021 Tacoma sr and am looking to this or near this setup Does anyone have the specs of what's used here so I am able to replicate the install? Appreciate your time.
did u have any rattling issues? i got a JL audio stealthbox similar to the skar box. most songs that have bass with my system make that plastic compartment rattle pretty bad. should i dynamat the plastic compartment?
Hey I have everything you bought but I have the jbl version and I can’t figure out where to go from the connectors the connector harness I bought had so many extra wires for speakers that plugs into the jbl amp but idk what goes where I need help
Maybe you can help me here I’m trying to do some research and I can’t find anything. I have my amp hooked up to the line input on that same amplifier. How do I add an epicenter since I’m not running RCA to the radio
Question? If a amplifier put out say 75 to 100 watts rms iis the factor speaker wire able to handle this power or should we go with a thicker guage wire? (Lets also say we also upgraded the factory speakers to speakers that also handle 75-100 rms.) Thanks
Really nice install, perfectly narrated. I noticed that you didn't use an aftermarket waterproof firewall grommet, was it because it was just easier to do so or was the customer on a budget?
I just bought this sub with the preinstalled subwoofer but I have an amp that only has 4 ohm and 2 ohm connections, the sub is pre wired to a 1 OHM connection. Is it possible to rewire this to 4 OHM so that way I can use my 5 channel amp and power my doors as well, without having to get a mono amp or a different amp?
@@ProvoBeastAudio thank you so much for the reply! Subscribed and will definitely be watching more of your channel. One of the most professional audio technicians on YT!
Is there anything additional you need to do on this amplifier for the subwoofer channel to work when using the high-level input connector like you did on this install? when running the four channels of power from the radio to the high-level input, the subwoofer channel will work?
amazing video and i have a question....I just had a group install a system into my 2023 taco. There is a constant buzzing noise when there is no music playing. I'm assuming you did not have any buzzing when you were done with your build. they keep blaming it on the fact that it is a factory radio. I'm calling bullshit but idk enough about it to question, hence, why i had a "professional " install it. Is there really anything that i can do? already tried a ground loup isolator. You can slightly hear a higher pitch when accelerating and when the windshield wipers are on, you can hear an amplified squeel sound. Ik its probably impossible to diagnose without actually seeing the truck, but, any ideas i may be able to look at would be a great help. The only thing thats a major difference is i have a 4 channel amp for the doors and the sub is an 8 inch sub amp combo.
I have a 2023 taco with the original speakers and radio and I hear a buzzing noise when there’s no music playing so there’s a chance it could just be the factory radio
Great tutorial 👌🏾 quick question how is the 2019 tacoma Red wolf harness set up looks like I just ordered it do I just use the speaker wires and connect the rest of the wire together?
Great video! I am confused by the LOC set up. I want to get an amp that will amp all my 2020 Tacoma speakers plus add a sub. Do I need a 5 channel LOC and a 5 channel amp? I currently have the cheap 2 channel LOC ‘add an amp’. But something tells me I can’t use that with a 5 channel amp. I’m so confused.
Thank you for the video. Quick question my 2023 Taco does not have a JBL system but it does have Navigation so that means that I do not have an amplifier?
Thanks for the video! I installed this amp yesterday. I just have one weird thing - the sub only works if I switch the sub/ab switch to ab. If I switch it to sub it cuts the cub off completely. Any idea what could cause this?
Yes because you are not supplying the amplifier a dedicated sub input signal. Since this is a high level input consisting of only 4 channels of input, we still need to generate an input for the sub, so that switch tells the amp to pull that sub signal from the other 4 channels A/B.
For a JBL equipped Taco, do you know if the Kenwood x802-5 would be able to mount within the factory JBL amp space behind the rear passenger seat? Also, if the HU has already been replaced with an Alpine Halo9 HU, would an Amp Pro LOC be necessary?
Sandwich technique! leftover ABS i snuck under the carpet for where i can drill into, sandwiching the carpet between both panels with a few screws. DO NOT drill through the floor of the truck.
I did my system using factory radio can you tell me why I lost back up camera and the microphone says disconnected is the wires for the microphone and camera are they located in the factory head unit
I have a 23 trd pro tacoma with the standard jbl. So there is a built in amp somewhere? What if I just want to replace all the door speakers and do nothing else, what is one of the best speakers to buy?
Looks great! I just received the same box but purchased the Skar Very Shallow mount sub, however the sub is still too deep. My question, did the comp RT fit without modification to the box? For the Skar VS-10 D2 to fit I would need to add a trim ring around the sub to lift it up about a 3/8''. Would like to find a sub that required no modification. Thanks in advance!
That amp does 550 Watts @ 2 ohms, so if you wanted two 12" subs, you'd want a pair that will wire to a final impedance of 2 ohms, and around 300 watts RMS each. It just depends on what vehicle, subwoofer box, etc is being used to know what sub combination would be best for your amp.
The tacoma comes with 6 speakers including the tweeters. Does the 4 channel amp cover all six speakers? Trying to find wiring schematic to see if the tweeters are standalone or if they feed from the front speakers. Thank you :)
Will that t harness work on my Sony 9500 es head unit? And if so would I still keep the hi res audio from the Sony 9500 if I hook up at 4 channel amp. I jus want to boost the power
If you have a an aftermarket radio, you won’t need t harness - instead just run rca cables from the radio to the amp, and speaker output from the amp to the radio harness adapter.
I just ran a 5 channel amp to my truck but I get a hissing sound from my speakers. Maybe it’s a terrible ground location. I’ll try to tap on to the factory ground you showed. Do you have any hissing?
Hi, thanks for sharing this good video. Question do you know if there’s a Kicker amp with the same option as the Keendwood amp so i can use the same cables you’re using to power my door speakers and 2 10” subs?
Parts used linked in the description of the video!
Is there any way you could do a video on the actual JBL system, on how to upgrade the amp and sub please?
Thank you very much But how about the tweeters are they connected to the harness to the amplifier ??? Thank you very much
Where did you get the SP level input cable that goes into the amp? I got the same Kenwood amp but it didn't come with the cable in the box. Great vid btw
was specifically looking for a tacoma guide, and this was posted today lol thank god
Did u do it?
Super clean install
I agree! This install was so clean!
I had a so called profesional upgrade my tacomas audio system a few years ago. When it stopped working I took it apart to check it out and what a mess! It looked like a rookie install, a ton of mistakes and poor quality work. So I decided to fix it myself, I ripped it all out and started over, your video provided a lot of useful information and really saved me a lot of time and frustration with this project. Great video, You have earned a new subscriber.
Hey provo beast audio, or whoever is the man in the videos! I got my avionics degree last year and learned all about wiring and sine waves. It got me into a new hobby of car audio. I used one where you worked on a Tahoe to install my system. Now I watch your videos for entertainment
Hey buddy, It's Chris (the man behind the curtain). I'm a one man show, so I appreciate the good words of encouragement. Glad you like the content! Cheers!
Avionics? Where you at if you don't mind me asking? I'm at Ft Novosel working avionics on the rotary wing fleet (don't want to say exact field). Avionics isn't a huge community. I was watching these vids because I just bought a Tacoma and wanted ideas and tips on how to run clean installs because the stock audio is.... subpar at best.
Phenomenal explanations of different wiring harnesses, techniques during install, and most importantly; the purpose of them! Thank you!
There are lots of good tutorials for this on TH-cam, but this is the best. Thanks so much for the clear tutorial.
Great info and I will use this video for my installation of all 4 new speakers & a new Sub-woofer as soon as Santa brings it for Christmas!!
I wish these fancy factory radios came with RCA outputs already 🤦🏻 This was really helpful, as soon as they drop a 4x 6.5 woofer box for the 24 I'll be revisiting this 👌
How crazy I just bought this amp and need more info on a 5 channel. im amazed to see i dont need to use the rca cables. this video really helped me understand the install also bought the plate for it to... thanks again
Thank you so much! Followed your instructions step by step and everything turned out perfect!
for the t harness- you can just get an add amp reciever and splice it onto there. makes it a whole lot easier to set it up
How much louder and better is the sound of this system versus the Rockford system that you did 8 months ago
Right??? What’s the answer lol 😂
Double tapping this! 😵
This please
2x as loud and 2x more durable
Excellent video! I followed it to the T and love this setup. The tweeters that come with the 6x9’s are bigger now but I was able to trim and fit. I highly recommend the bass knob. Thanks
There's no eco from the shop/garage. It's hard to trust you. Lol, I'm just kidding. Can't be penalized for quality. Thank you for the video.
Echo though.
Great video. Quick question as to how you attached the amp mount to the floor?
At 19:40 it looks like we have a pretty good view of some black sheet metal screws. But I could be wrong.
To anyone who has used this amp and connected it this way - is your volume loud?
My music sounds clear but I kinda expected a little higher volume, but with the amp dialed in Immy speakers and sub are not that loud. I installed this amp and a 10” jl in a stealthbox and infinity primus 6x9s in the front and infinity reference speakers in the rear.
Do you have a video on upgrading amp and speakers with stock head unit on a Tacoma with the jbl upgrade system?
I installed everything just like in this video but only difference is that I bought the harness for the 2016-2020 harness for my 2018 Tacoma, but the radio won’t turn on! What’s happening can someone explain me please!
What was wrong ? I have a 2019 looking to do this install next week . 😅
Can you close the seat with this box and still have it be functional for someone to sit there?
I wanna hear what the sub sounds like that comes with the box
Can't the Skar sub that comes with box is 1ohm. The amp isn't 1 ohm stable and would damage amp/sub.
How did you tack the amp board down to the car?
Yes how??
Looks like he has a couple screws into the floor
your link to a tacoma front door/dash speaker install takes us to a Ford F150 install.. might wanna fix that one
Man I have the tyo1 harness and the ap4-ty13 and im throughly lost i cant make this work I have the jbl premium junk and I thought I had the correct amppro and harness but I can't make sense out of it
Another excellent video, thank you.
how do you adjust the bass of the subwoofer without a dial
You don't, i mean you could use the bass adjustment on the radio. Outside of that, there is no easy adjustment without the knob. Kenwood sells it for $35 on amazon.
(linked in description)
Thanks, where would you install the bass knob I have the same truck@@ProvoBeastAudio
It's as if you made a custom vid just for me... simpatico, muh man....
Those are fork terminals... not spade. Love the videos brother!
This is a 5 channel amp. Will it also power the tweeters in the front?
Yes
I just saw a professional, I congratulate you, very good video and well explained. I would like to know where you are located.🎉
really good video easy as pie thank you
How much louder is it than the factory jbl system
How do i avoid the pop when i turn off my car
Great Install! I have a question? do the front dash speakers still remain Functional? do they still get signal from the Factory head Unit or amp ?
Great Question????
any chance you have a video or diagram explaining how to modify the harness for the Tacoma 2016 System?, I bought recommended links so I have the same componends w/ the red wolf harness 2016
That sub enclosure is sold out everywhere. Is there another box that you recommend with all the same components? Thank you in advance.
It's the season timing, but Skar allows you to preorder it and have it shipped in december if you order right through them.
I saw that thanks. One more thing is why did you use a remote wire? the amp has a auto turn on feature.@@ProvoBeastAudio
We try and apply techniques for anyone using any type of amp. Yes, the Kenwood can turn itself on, however, not ever viewer will use that exact amp.@@bbogue4
Thank you so much for the informative videos. I just put my order in for the box. I would love a video on how you tuned the amp.@@ProvoBeastAudio
What sub is recommended to work the best with the kenwood 5 Chanel amp? Looking for a an already inclosed option. Also what speakers should I get
Does that skar box need to be ported or no?
Great video and coincidentally it's the same stock audio system as my tacoma.
I'm currently trying to fit a small 5 channel amp in the empty space behind the radio so I don't have to run the wires back and forth. I'm going to place the sub under the passenger seat in a custom enclosure
I want to use Pac APH-TY04 Speaker Connection Harness to bypass my factory JBL amp (2017 Tacoma). Once I connect the 10 pin and 12 pin from the harness to factory harness what wires do I connect to my amp? What do I do with the unuse wires coming from the harness?
Hello question so if I wanted to to a different sub and box with this setup to sit on the seat like a 12” with a decent size box would the amp know not to blow out the speakers in the doors when I push it hard? That’s all I’m a little confused about
What is the small blue wire for, that is in between the Power & Ground wires??
The on/off signal wire.
Hello. How did the sound in rear speaker sound? In my Toyota the rear sound from headunit its wery low and Almost no bass.
And amplyfy that weak signal just get louder ?,,, but still no bass ? Right. ??
Have a 2021 Tacoma sr and am looking to this or near this setup
Does anyone have the specs of what's used here so I am able to replicate the install?
Appreciate your time.
When ordering on your website what do I select for the LOC if I'm using an amplifier???
did u have any rattling issues? i got a JL audio stealthbox similar to the skar box. most songs that have bass with my system make that plastic compartment rattle pretty bad. should i dynamat the plastic compartment?
Hey I have everything you bought but I have the jbl version and I can’t figure out where to go from the connectors the connector harness I bought had so many extra wires for speakers that plugs into the jbl amp but idk what goes where I need help
What’s wrong or different with using the SK-M5001D | 500 Watt Monoblock Car Amplifier with the loaded enclosure ?
I did the same as you did but my sub only works in reverse. What do I do?
Maybe you can help me here I’m trying to do some research and I can’t find anything. I have my amp hooked up to the line input on that same amplifier. How do I add an epicenter since I’m not running RCA to the radio
What size T-tap are you using?
How did you actually get the input signal for the subwoofer? It doesn't look like that harness had the wires for it.
As of today (11-03-2023) 2023 with JBL is not listed as compatible with any PAC, harness or any other brand converter... or am I missing something?
Did you wire the sub for 2 or 8 ohm? Mine is super quiet. Same amp, sub and enclosure.
Thank you for the video. Quick question my Taco does not have a JBL system but it does have Navigation so that means that I do not have an amplifier?
Does this really fit both 2024 and earlier? 2024 is 4th gen, everything is different from the earlier ones.
How do you secure the amp to the plastic panel?
Awesome set-up!
How did you mount the ABS to the truck? I want to do the same set up and that’s the only thing I’m not sure of.
I was wondering the same thing. Maybe with sheet metal screws...carefully?
How tune the amplifier?
Question?
If a amplifier put out say 75 to 100 watts rms iis the factor speaker wire able to handle this power or should we go with a thicker guage wire?
(Lets also say we also upgraded the factory speakers to speakers that also handle 75-100 rms.)
Thanks
Will this mess with the DCM and remote start and such?
I have a 2017 Tacoma double cab, does the speaker box slide in with out cutting?
Really nice install, perfectly narrated.
I noticed that you didn't use an aftermarket waterproof firewall grommet, was it because it was just easier to do so or was the customer on a budget?
I just bought this sub with the preinstalled subwoofer but I have an amp that only has 4 ohm and 2 ohm connections, the sub is pre wired to a 1 OHM connection. Is it possible to rewire this to 4 OHM so that way I can use my 5 channel amp and power my doors as well, without having to get a mono amp or a different amp?
Can you still close the back seat with the skar box installed? I don’t want to have to start cutting plastic
Absolutely.
@@ProvoBeastAudio thank you so much for the reply! Subscribed and will definitely be watching more of your channel. One of the most professional audio technicians on YT!
Is there anything additional you need to do on this amplifier for the subwoofer channel to work when using the high-level input connector like you did on this install? when running the four channels of power from the radio to the high-level input, the subwoofer channel will work?
Have you happened to have done a tutorial on a 2017 non jbl red wolf t harness?
amazing video and i have a question....I just had a group install a system into my 2023 taco. There is a constant buzzing noise when there is no music playing. I'm assuming you did not have any buzzing when you were done with your build. they keep blaming it on the fact that it is a factory radio. I'm calling bullshit but idk enough about it to question, hence, why i had a "professional " install it. Is there really anything that i can do? already tried a ground loup isolator. You can slightly hear a higher pitch when accelerating and when the windshield wipers are on, you can hear an amplified squeel sound. Ik its probably impossible to diagnose without actually seeing the truck, but, any ideas i may be able to look at would be a great help. The only thing thats a major difference is i have a 4 channel amp for the doors and the sub is an 8 inch sub amp combo.
Did you use an Amp with high level inputs? Or a separate converter ? What amp did you go with?
I have a 2023 taco with the original speakers and radio and I hear a buzzing noise when there’s no music playing so there’s a chance it could just be the factory radio
What do you have you’re dials set at?
I havent seen anyone ask how much something like this will cost???
If I install it this way will it send power to my front and rear door speakers?
Great tutorial 👌🏾 quick question how is the 2019 tacoma Red wolf harness set up looks like I just ordered it do I just use the speaker wires and connect the rest of the wire together?
Yo I installed audio control amp 4 channel and alpine S2 speakers all around and the rear ones are still super quiet? Any suggestions?
I want to install this same amplifier to my 14 accord. Will a lc7i sound much better or not really, in your experience
Great video! I am confused by the LOC set up. I want to get an amp that will amp all my 2020 Tacoma speakers plus add a sub. Do I need a 5 channel LOC and a 5 channel amp? I currently have the cheap 2 channel LOC ‘add an amp’. But something tells me I can’t use that with a 5 channel amp. I’m so confused.
How is that sub and box compared to a JL stealthbox?
About a grand cheaper.
Thank you for the video. Quick question my 2023 Taco does not have a JBL system but it does have Navigation so that means that I do not have an amplifier?
Did everything and followed step by step,yet the sub is not powering up or responding. Any idea why?
Same same here just did this exact install
Thanks for the video! I installed this amp yesterday. I just have one weird thing - the sub only works if I switch the sub/ab switch to ab. If I switch it to sub it cuts the cub off completely. Any idea what could cause this?
Yes because you are not supplying the amplifier a dedicated sub input signal. Since this is a high level input consisting of only 4 channels of input, we still need to generate an input for the sub, so that switch tells the amp to pull that sub signal from the other 4 channels A/B.
@@ProvoBeastAudio thanks for the reply! Okay yeah I thought that may be the case but just wanted to make sure. Thanks!
Great work!
I have the exact amp im gonig to install. If i install it just like you did it will tum power to all my speakers right?
If my new head unit has RCA jacks can I use those instead of speaker wires
Of course
Do kicker comp r fit on this enclosure or is it rt
Did that high level input harness come with the kenwood amplifier? I didn’t see it linked in the description. Thank you.
I have the same question lol.
But i think we need to get 2 T harness connectors so we can use 1 for the amp as well
it does he says it at 6 minutes
Great video!! I am planning to do the same setup. Can you share the crossover settings used?
A great place to start is around 80hz for low pass and high pass. You can lower the HPF if needed based on the speakers you install.
Does that subwoofer slap the back of the seat when closed? Does one only use the sub when the rear seat is pulled forward?
Nope, all clears fine when seat is closed.
For a JBL equipped Taco, do you know if the Kenwood x802-5 would be able to mount within the factory JBL amp space behind the rear passenger seat? Also, if the HU has already been replaced with an Alpine Halo9 HU, would an Amp Pro LOC be necessary?
How did you mount the amp to the floor under the seat?
Sandwich technique! leftover ABS i snuck under the carpet for where i can drill into, sandwiching the carpet between both panels with a few screws. DO NOT drill through the floor of the truck.
I did my system using factory radio can you tell me why I lost back up camera and the microphone says disconnected is the wires for the microphone and camera are they located in the factory head unit
Was any steering wheel or any other functionality lost?
I have a 23 trd pro tacoma with the standard jbl. So there is a built in amp somewhere? What if I just want to replace all the door speakers and do nothing else, what is one of the best speakers to buy?
Quad fathers
Looks great! I just received the same box but purchased the Skar Very Shallow mount sub, however the sub is still too deep. My question, did the comp RT fit without modification to the box? For the Skar VS-10 D2 to fit I would need to add a trim ring around the sub to lift it up about a 3/8''. Would like to find a sub that required no modification. Thanks in advance!
No modification needed with the kicker sub!
I did same thing, but sent them back bc they have the loaded in stock
i have a jbl club 5501 and i need too know which two 12inch subwoofers would work best pls help
That amp does 550 Watts @ 2 ohms, so if you wanted two 12" subs, you'd want a pair that will wire to a final impedance of 2 ohms, and around 300 watts RMS each. It just depends on what vehicle, subwoofer box, etc is being used to know what sub combination would be best for your amp.
The tacoma comes with 6 speakers including the tweeters. Does the 4 channel amp cover all six speakers? Trying to find wiring schematic to see if the tweeters are standalone or if they feed from the front speakers. Thank you :)
Yes, the factory radio puts out 4 channels. The dash and door speakers are on the front channels.
Will that t harness work on my Sony 9500 es head unit? And if so would I still keep the hi res audio from the Sony 9500 if I hook up at 4 channel amp.
I jus want to boost the power
If you have a an aftermarket radio, you won’t need t harness - instead just run rca cables from the radio to the amp, and speaker output from the amp to the radio harness adapter.
Did you have to adjust the input sensitivity on this amp given that you're using high level input? Or is that only if low level input is being used?
Hello so did you use the kicker 4 ohm subwoofer or kicker 2 ohm subwoofer
I just ran a 5 channel amp to my truck but I get a hissing sound from my speakers. Maybe it’s a terrible ground location. I’ll try to tap on to the factory ground you showed. Do you have any hissing?
Try turning your amplifier input gains down.
I have a light hiss, I ended up turning down the gains and it did the trick
I did this same setup but my sub isn’t working. Any tips?
Need to switch the sub input selector on the amp to A/B.
@@ProvoBeastAudio thank you!!! That seemed to do the trick
Hi, thanks for sharing this good video. Question do you know if there’s a Kicker amp with the same option as the Keendwood amp so i can use the same cables you’re using to power my door speakers and 2 10” subs?