A New EVO 8 Shell

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 ก.ค. 2024
  • 0:00 Welcome!
    00:10 New Shell Walk Around
    07:08 The Sliver EVO8
    08:59 Evo Clutch Pedal Bushing
    12:10 Be A Good Person
    www.boostedfilms.com
    Disclaimer: This video is for entertainment purposes only! Perform anything you see in this video at your own risk. Due to factors beyond the control of this video creator, I cannot guarantee against improper use or unauthorized modifications of this information. Boosted Films assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Boosted Films, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Boosted Films.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 14

  • @jethrox827
    @jethrox827 17 วันที่ผ่านมา +3

    This is the reason i came here years ago 👍

  • @syo_nara1916
    @syo_nara1916 17 วันที่ผ่านมา +1

    Best, guaranteed future content I can look forward to!!!

  • @ozman1975
    @ozman1975 17 วันที่ผ่านมา +1

    Nice pick up Paul, can't wait to see the "evolution" of this project 😉

    • @BoostedFilms
      @BoostedFilms  17 วันที่ผ่านมา +1

      Ha, nice. Should be a fun one. A bit hard to believe its like the 3rd evo i'll be documenting a build on.

  • @timessiah94
    @timessiah94 16 วันที่ผ่านมา +1

    I remember when mine was red.

  • @andydhillon1977
    @andydhillon1977 17 วันที่ผ่านมา +3

    I love these kinds of builds!
    Yeah. The clearcoat on these Evos were notoriously thin. Same exact issue with my 2008 Civic. They really all need to be repainted.
    Its such a shame to see so many enthusiast cars absolutely torn apart like this. I will never understand the thiught process. It has happened for decades, and will continue unfortunately. Smh

    • @Ryan_1997
      @Ryan_1997 17 วันที่ผ่านมา

      One owner here has the same model(red too) and all flaky 🤦‍♂️

  • @arspec
    @arspec 13 วันที่ผ่านมา +1

    Nice to see the content coming back up to speed I’ve learned a lot from
    Ur vids keep it up 👍🏽

  • @jayryia
    @jayryia 17 วันที่ผ่านมา +1

    Nice! Get some Cavity wax while you're at it and spray all in those sideskirt holes, AND in the trunk at the holes where the rear lower glass weatherstrip is... you'll have to feel by hand where the holes are but start from the hinges area.
    And maybe inside the well where the seam sealant joins the body and wheel well tub as well. MOST lancers leak in the trunk either from where roof strips join the lower glass weatherstrip (it rots out the same holes I talked about ealier where the plastic clips hold the weatherstrip, OR the seam sealant right at the weatherstrip each side fails, OR sometimes just the trunk rubber is either compromised or loose.

    • @BoostedFilms
      @BoostedFilms  17 วันที่ผ่านมา +1

      Thanks. Any brand cavity wax you recommend?

    • @jayryia
      @jayryia 17 วันที่ผ่านมา +1

      @@BoostedFilms 3m cavity wax is the go to. Eastwood I think also carries a good one.

  • @alvinwthaevo8
    @alvinwthaevo8 16 วันที่ผ่านมา +1

    That e brake is an oem option it matches the blue seats! I have the silver version of it

    • @BoostedFilms
      @BoostedFilms  16 วันที่ผ่านมา

      Nice, i did not know that.

  • @Ryan_1997
    @Ryan_1997 17 วันที่ผ่านมา

    I want that evo 😞