Hi Kenji, I did notice you using the new knives from the awesome set. Looking forward to getting mine. The door seams on this look perfect. There is no way you can tell they were cut out. It looks like your Graphic Design talents are coming through on this too. Always a pleasure to watch. Thank you for sharing Kenji, and take care.🐙
Hi Brian, Thanks again for your support with your comments. When things don't go so well, I wonder if it's okay to make videos like this, but I'll try to do it freely without worrying too much.😊
In earlier videos Kenji explains why only the one door will be made to open. It is because once the doors or hatch are cut out there is nothing left of the outer model body and he'd have to model structure back in making it difficult for the kit to fit together and it's just a big pain. You will see this added structure around the driver side door and hood. The hood will not be made to open, it was cut our to add the seam line so it looks like it will open and so he could add structure and do other enhancements such as fixing the grill, refine the light covers, etc. Be sure to read Kenji's pop-ups, they explain a lot. 😁
![#268 [Builder's view] Fujimi1/24 Isuzu Piazza under construction / Scale model building](http://i.ytimg.com/vi/FsuiXml-vNs/mqdefault.jpg)
![#268 [Builder's view] Fujimi1/24 Isuzu Piazza under construction / Scale model building](/img/tr.png)
![#254 [Builder's view] Fujimi1/24 Isuzu Piazza under construction / Scale model building](http://i.ytimg.com/vi/uDzUgg01Aqw/mqdefault.jpg)
Love this update, I love them all. This one covered a lot. Such a challenging kit. I'm eagerly awaiting the next update as always.
Thank you!😊
It seems that nothing is straightforward about this build but you are making good progress. Looking forward to the next episode. 🙏
Thank you!
You know you’re good when I hit the like before I even start your video! Well done Kenji!
Thank you😊
Beautiful build Kenji 😊
Thank you!😊
Hi, watching your content from Liverpool, England. Your videos are so relaxing. Like valium for the soul. I could watch them for hours. Great talent.
Thank you for your comment.
I am very glad you liked it. Liverpool is famous for football.
@@kenji-plasticmodels Football and the home of The Beatles. If you're into music.
Hi Kenji, I did notice you using the new knives from the awesome set. Looking forward to getting mine. The door seams on this look perfect. There is no way you can tell they were cut out. It looks like your Graphic Design talents are coming through on this too. Always a pleasure to watch. Thank you for sharing Kenji, and take care.🐙
Hi Brian, Thanks again for your support with your comments.
When things don't go so well, I wonder if it's okay to make videos like this, but I'll try to do it freely without worrying too much.😊
お疲れ様です。
こんな細いAピラーのクルマのドアを開閉しようと思ったら、その先に待ち受ける困難を想像しただけで自分なら手が止まってしまうのに、キッチリとひとつひとつ乗り越えて形にしてゆくプロセスは感動すら覚えます。😮
ドア内張の形状出しやモールドの再現など、ちょっと真似できないレベルですよね。
まあ、個人でイラストレーター持っている人はそうは居ないと思いますが…😅
Kenjiさんの作業はほぼセミスクラッチなので、なかなか模型初心者にとってのTip'sにはなりにくいかなとは思いますが、エンタメとしては凄く見応えのある内容だと思います。
次回も楽しみにしております。
お疲れさまです。
この車は外側に変なラインがいかないようにとてもよく考えられていて、さすがジウジアーロというところですね。
イラストレーターは本職で使うので持っていますが、似ているフリーソフトがありますので、そういったものでもいいです。
気がつくと初心者には難しい作業ばかりになってしまいましたが、そういうものがあるのだと認識してもらって、上達したときにチャレンジしてもらえればと思います。
いつもありがとうございます😊
Really enjoying watching this unfold, you are clearly a very talented man. Do you plan on making the other door or the hatch open as well?
Thank you✨
The rear hatch does not open. Only one of the doors does, too.
In earlier videos Kenji explains why only the one door will be made to open. It is because once the doors or hatch are cut out there is nothing left of the outer model body and he'd have to model structure back in making it difficult for the kit to fit together and it's just a big pain. You will see this added structure around the driver side door and hood. The hood will not be made to open, it was cut our to add the seam line so it looks like it will open and so he could add structure and do other enhancements such as fixing the grill, refine the light covers, etc.
Be sure to read Kenji's pop-ups, they explain a lot. 😁
Que lindo seu trabalho ,Muito legal 👏👏👍👍🚙🚙🇧🇷🇧🇷
Concordo, ele é o mestre do plástico modelo 😊
Obrigado!😊✨
Man Just awesome work, keep it goin'
Thanks😃
｢だが､それがいい｣これがいい！
👍
エポパテをかき出している時に使用している先端の曲がった平刀はどこで購入できますか ?
amzn.to/3vJbv7K
こちらでどうぞ
ヒンジのパイプは何を使用されていますか？！
アルミパイプで、外径が多分1.0か1.2mmだと思います。
Genius ❤
Thank you✨
Do you have in mind making a racing car? One of rally, LeMans, Imsa, group c?
I am going to make it someday😃
Hmmm maybe a Subaru WRX STi. I'd still love to see Kenji tackle some American muscle or pretty much any number of subjects too numerous to count. 🤣
ジウジアーロに文句言わねば!!
実車なら素材がプラスチックじゃない＆厚みも違うから強度もいけるんです😁
当時はリアはポルシェ928の様に観えましたし立ち位置的にはスポーツカーとラグジュアリークーペの間の子みたな感じですからね。なので極力ピーラーを細くしてスタイリッシュに見せたかったのかな？