This helped me to do my expenses today! I was just careless neglecting the K toner warning for weeks. I've got C321dn. When I had set "Toner sensor" = "Disabled", the printer still stayed in error state (and wouldn't print). But then I took the chip away from K toner catridge, put it in the printer, restart printer - missing K toner error - put the chip back - restart printer - and ONLINE printing started. I would guess simply taking K toner catridge out and restart would do the same trick. Maybe my printer was somewhere too deep in error state and required this extra step.
Thank you! Works on OKI301dn on Windows 7 Pro 64bit! For those OKI is set to printer share and cannot print, go to "Pinter Properties" of OKI printer. Go to "Advanced" and click "Print directly to the printer". If you have a document still waiting to print, please delete the queue printing then try again. For my case, it wouldn't print due to notification for toner replacement.
Thanks for sharing. Unfortunately while that option exists on my oki mono printer, it doesn't seem to do anything. It behaves the same with sensor disabled as it does with sensor enabled. It prints about 10 pages then nags. I'm just commenting so the next person who inevitably runs into this doesn't feel so lonely :)
OKIDATA MODEL-C5100 It took me several hours, but I figured out how to do this. It is very similar, but you don't need the code six zeros. Here's how: (1). power up while holding the + and - keys. (2) display says "OKI USER". (3) scroll to "ENGINE DIAG" MODE" and push ENTER. (4) display says MODE xx.xx.xx.xx S-Mode is indicated. (5) Press (+ or -) until display says "ENGINE=PARAMETER SET 2" then press ENTER. (6) press (+ or -) until display says "TONER SENSOR = ENABLE" (8) Press ENTER. (9) press (+ or -) so display says DISABLE. (10) press these 2 buttons at the same time ONLINE and CANCEL. Now the * star symbol is displayed, indicating you have disabled the sensors. I turned my printer off and back on... and now the sensors are disabled.
Can you help me? I found difficult after refill printed only 200 pages then tell 432: K TONER EMPTY. I tried holding 'UP' and 'DOWN' while powering but does not wake up on 'MAINTENANCE'. Please help
היי אלי, יש לי OKI C511dn שזה כמעט זהה ל- C301 עשיתי את מה שהצעת אבל הבעיה שהטונרים שלי ריקים לחלוטין - אם אני אמלא את הטונרים זה יעבוד או שצריך לקנות צ'יפ חדש?
I had an order C online warning and couldn't print. After following instructions I managed to print the item I was trying to (40-odd pages) but the sensor screen continues to display Online Order C Toner - Online Power Save. Also my Green lght never flashed and both red and green lights are on as before. So, I managed to print when I couldn't before and guess I just got to drill hole and fill up C Toner. I guess this is to be expected. I obviously disabled the sensor but still need to fill up C Toner. It won't keep printing if toner is empty IsawUupThere but the sensor stops the printer from functioning & tells you a new cartridge is necessary some time before it's really empty to maximize profit. I believe disabling the sensor is a necessary step if you intend refilling the cartridge yourself which is what I will do now. Details of how to do this should appear on the next TH-cam video to show up by U Refill Toner. Hope this helps and a big shout out to Eli. Thank you, sir!
Can you help me? My printer is OKI C332dn, I found difficult after refill printed only 200 pages then tell 432: K TONER EMPTY. I tried holding 'UP' and 'DOWN' while powering but does not wake up on 'MAINTENANCE'. Please help REPLY
You are an absolute star. I needed to print out an Ebay returns and my printer wouldn't let me until I saw your video, thank you! 😀
Fantastic!
I'm so grateful you shared this. Was able to get my printer to print again.
This helped me to do my expenses today! I was just careless neglecting the K toner warning for weeks.
I've got C321dn. When I had set "Toner sensor" = "Disabled", the printer still stayed in error state (and wouldn't print). But then I took the chip away from K toner catridge, put it in the printer, restart printer - missing K toner error - put the chip back - restart printer - and ONLINE printing started. I would guess simply taking K toner catridge out and restart would do the same trick. Maybe my printer was somewhere too deep in error state and required this extra step.
It is working for OKIB431+ and solves also error 547 which no other way soved ! Thank you Eli !
Ziv
יש לי 432 B לא מצליחה להגיע למערכת בלחיצה ממושכת כפי שמתואר, יש דרך לאפס ב432?
Thank you! Works on OKI301dn on Windows 7 Pro 64bit! For those OKI is set to printer share and cannot print, go to "Pinter Properties" of OKI printer. Go to "Advanced" and click "Print directly to the printer". If you have a document still waiting to print, please delete the queue printing then try again. For my case, it wouldn't print due to notification for toner replacement.
Thanks for sharing. Unfortunately while that option exists on my oki mono printer, it doesn't seem to do anything. It behaves the same with sensor disabled as it does with sensor enabled. It prints about 10 pages then nags. I'm just commenting so the next person who inevitably runs into this doesn't feel so lonely :)
OKIDATA MODEL-C5100 It took me several hours, but I figured out how to do this. It is very similar, but you don't need the code six zeros. Here's how: (1). power up while holding the + and - keys. (2) display says "OKI USER". (3) scroll to "ENGINE DIAG" MODE" and push ENTER. (4) display says MODE xx.xx.xx.xx S-Mode is indicated. (5) Press (+ or -) until display says "ENGINE=PARAMETER SET 2" then press ENTER. (6) press (+ or -) until display says "TONER SENSOR = ENABLE" (8) Press ENTER. (9) press (+ or -) so display says DISABLE. (10) press these 2 buttons at the same time ONLINE and CANCEL. Now the * star symbol is displayed, indicating you have disabled the sensors. I turned my printer off and back on... and now the sensors are disabled.
THANK YOU! IT WORKED FINE. GOOD JOB
Can you help me? I found difficult after refill printed only 200 pages then tell 432: K TONER EMPTY.
I tried holding 'UP' and 'DOWN' while powering but does not wake up on 'MAINTENANCE'. Please help
Hi, this works too in Oki C332?
Thanks a lot.
it worked also with c321dn for few days bot now it is same as earlier. Thank you anyway!:)
Same here with C321dn. You can redo the process. But I wish there was a solution
@@gillesbroadcast there is. I've found a software that reset levels of toners. Since then printer works perfectly.
Hi
work on c531dn ?
OMG you are a god! Thank you so much.
No I'm not a god.... just like my printer to keep on printing....
you are my hero! thanks!
wow thank you it worked for me. thanks again
Thanks for the help!
Happy to help!
Thank you so much!!!😁
Hi, how can I skip my samsung proxpress m4583fx sensor and use all the toner left in the cartridge
I don't know
Work on okic322dn??
I Don't know... could be
Gracias desde España amigo.
In C332dn, please tell me the button operation to enter Level2 from "DIAGNOSTIC MODE xx.xx.xx S-MODE" in maintenance mode.
I don't know, try this one since I guess they will not create a different code for each model.
Thank you for your comment. I've tried many things, but it seems that this model is different. ”Diag Level 2” may not exist in the first place.
Can you tell me how to do the same in OKI ES941.
I don’t know... I don't have it....
האם יש דרך לאפס את המונים של הטונרים ולהמשיך להשתמש גם אם כבר מילאתי אותם פעמיים (בערך 3000 דף עם הטונרים ההתחלתיים)?
בתפריטים יש אפשרות לאפס
יכול להיות שצריך להכנס לתפריט אדמין ולא תחזוקה
תפעיל עם לחיצה רק על חץ למעלה ולא שניהם כמו כאן
ואז הססמה היא
aaaa
Amazing!
merci beaucoup Eli!!!! :)
היי אלי,
יש לי OKI C511dn שזה כמעט זהה ל- C301 עשיתי את מה שהצעת אבל הבעיה שהטונרים שלי ריקים לחלוטין - אם אני אמלא את הטונרים זה יעבוד או שצריך לקנות צ'יפ חדש?
קשה לי לומר בוודאות. אצלי ב-301 זה עבד
קניתי באיביי מילוי טונרים והמכונה ממשיכה להדפיס.
Thank you, it works.
Worked for my C511dn like a charm, thanks a 1,000,000 תודה הצלת אותי
it doest work for me... how did you do that?
valeu manooo vlw (do brasil.) im from brazil
Under same menu you can change setting for drum so you can still print.
That is correct
Thank you buddy
Any time!
Большое спасибо, все работает
Thank You
THANKS!
You're welcome!
many thanks
merci. It works on MC362 too.
I had an order C online warning and couldn't print. After following instructions I managed to print the item I was trying to (40-odd pages) but the sensor screen continues to display Online Order C Toner - Online Power Save. Also my Green lght never flashed and both red and green lights are on as before. So, I managed to print when I couldn't before and guess I just got to drill hole and fill up C Toner. I guess this is to be expected. I obviously disabled the sensor but still need to fill up C Toner. It won't keep printing if toner is empty IsawUupThere but the sensor stops the printer from functioning & tells you a new cartridge is necessary some time before it's really empty to maximize profit. I believe disabling the sensor is a necessary step if you intend refilling the cartridge yourself which is what I will do now. Details of how to do this should appear on the next TH-cam video to show up by U Refill Toner. Hope this helps and a big shout out to Eli. Thank you, sir!
thank you so much!
Thanks!!!
Welcome!
MERCI!
תודה רבה איש יקר רק איפה אפשר למצוא אבקה בזול לא מצאתי חחח
הזמנתי מילוי באיביי, קיבלתי 4 בקבוקי אבקה, מילאתי את מיכלי ההתחלה המקוריים והמדפסת שוב מדפיסה
thanks ı have same printer ı hope this going to work
Tanks is Brazil
it is not work on c332c
I'm sure that you can find the PW for the menu for C332 on the Web.
Dont works for me!
Works the same on C321dn. Thanks
Can you help me? My printer is OKI C332dn, I found difficult after refill printed only 200 pages then tell 432: K TONER EMPTY.
I tried holding 'UP' and 'DOWN' while powering but does not wake up on 'MAINTENANCE'. Please help
REPLY